oil feed, oil cooling, oil filter for Alle 2CValt

Copper sealing ring, diameter inside 14,3mm. (14,3x19x1,5)

Oil drain screw magnetically, suitable for Citroen 2CV, HY, DS, 11CV (with oil pan out of sheet

metal). Interior square. The suitable tool has our number 20221. Or. No. A1321M, thread M16x1,5x20

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €
• 
  Special tool for the oil drain screw. Square 8 + 10mm. Suitable for Peugeot +
  10,81 €

Oil drain screw (engine + gearbox) suitable for Citroen 2CV, DS, HY, GS. Thread M16.

• Suitable for this article
• 
  Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet +
  0,48 €
• 
  Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of
  31,14 €
• 
  Hose (25cm) for the oil drain screw with valve (10636). Thread: M22 x 1,5.
  34,61 €

Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505

J7 (all engines). Renault R4. Citroen HY. AMI6 with M4 engine. Oil cooler screwed joint 2CV with 16HP!

Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw

measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)

Oil pressure switch, suitable for Citroen ID19, DS19, HY petrol. Citroen 2CV + AMI6 without oil

filters! Thread: M14x1,5.

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball

fixture, slip piece (12,20mm long).

Oil pressure valve repair set for Citroen 2CV (375, 425, 435cc³). Consisting of spring, ball, ball

fixture, slip piece (16,30mm long).

Oil filler neck seal down, old version. For 2CV with 16 HP engines. Center in the middle about

ut 30mm, hole spacing connector ca.46mm. Or. No. A221 92

Oil filler neck ventilator rubber (sniffer valve), suitable for Citroen 2CV with 16 HP engine.

Oil filler neck for 2CV with 18 HP engine. Reproduction, Or.Nr.: A 221.03

Oil filler neck rubber cap, suitable for Citroen 2CV (12HP), to year of construction 1963. Or.Nr

A17199

Oil filler neck. Suitable for Citroen 2CV (also A-type), to year of construction 3/1963. Short

overall height.

Oil filter tool (76mm inside diameter) , particularly for PURFLUX oil filter with 6 or 12 slots

(Citroen 2CV)

Tool universal for oil filtre, fits for all oil filter, also to remove spheres!

Oil cooler. Suitable for Citroen 2CV, to year of construction 03/1963. Engine: 425cm ³

Reproduction. Or. No. A2251.

• Suitable for this article
• 
  Oil cooler hollow screw - banjo screw (screw connection - oil cooler connection
  4,56 €

Oil cooler for Citroen 2CV4. Or. no.: 5440575

• Suitable for this article
• 
  Oil cooler line seal, from rubber. Per piece! The rubber seals the oil cooler
  0,48 €
• 
  Oil cooler tool (to loosen the union nut of the oil line that goes into the
  14,86 €

Oil cooler pipe, old version. Suitable for Citroen 2CV, from the fifties and sixties. Or. No

AZ22588

Engine oil dipstick rubber application above in the guide tube. (Fixture + guide rubber engine oil

dipstick). Suitable for Citroen 2CV old + 2CV4. Lenght: 40mm. Or.Nr. A221-95a

Engine oil dipstick for Citroen 2CV (12 HP).