for Citroën 2CV ACDY

Fixing clip for door lining. Simple reproduction. Suitable for Citroen 2CV, DS, Peugeot, Renault

Per piece. For 2CV, you need 5 clips for 1 door lining in front (low version) and 4 for rear. For 7mm holes.

• Suitable for this article
• 
  Plastic plug, white, in the door for doorlining. Citroen DS, per item. Inside
  0,60 €

Fixing clip for door lining. Very good reproduction. Suitable for Citroen 2CV, DS, Peugeot

Renault. Per piece. For 2CV, you need 5 clips for 1 door lining in front (low version) and 4 for rear. For 7mm holes!

• Suitable for this article
• 
  Plastic plug, white, in the door for doorlining. Citroen DS, per item. Inside
  0,60 €

Door lining in front on the left + right (2 pieces). Color: Vinyl black. Suitable for Citroen

Acadiane (ACDY).

Identification plate color: AC083 AC. Mounted in the engine compartment Citroen DS, 2CV, Dyane, AK.

Identification plate color: AC084 DU. Mounted in the engine compartment Citroen DS, 2CV, Dyane

Identification plate color: AC087 LE. Mounted in the engine compartment Citroen DS, 2CV, Dyane

Identification plate color: AC088 LE. Mounted in the engine compartment Citroen DS, 2CV, Dyane

Identification plate color: AC095 CO. Mounted in the engine compartment Citroen DS, 2CV, Dyane

Identification plate color: AC095. Mounted in the engine compartment Citroen DS, 2CV, Dyane

Identification plate color: AC403 AS. Mounted in the engine compartment Citroen DS, 2CV, Dyane

Type plate for the engine = A06/635. Colour: red. Suitable for Citroen 2CV6

Identification plate green, for Citroen. 78x40mm. 2 bores. (Metal). The green identification plates

were often used for gearbox identification!

Identification plate orange, for Citroen. 78x40mm. 2 bores. (Metal). The red identification plates

were often used for engine numbers!

Identification plate S.A.A Citroen. These identification plates are installed in 2CV, DS, 11CV, HY

Measurements of 43x70mm. Unfortunately a bad reproduction.

Identification plate, German version, for Citroen. (Metal). 110x50mm. 4 bores.

Identification plate, original-faithful reproduction. Suitable for Citroen 2CV, DS, HY, 11CV

Measurements: 43 x 78mm.

Identification plate, original-faithful reproduction. Suitable for Citroen 2CV. 46x90mm

Transfer pump metal version, inclusive 2 hoses for drawing in and running off, 500ccm. Applicable

e for: Diesel, fuel oil, coolant, brake fluid.

Sealing paper set with and without metallic carrier! to produce own seals ! Size DINA4. Original

REINZ".

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €
• 
  Scrapers professional version, to remove of labels on disks, engine sealing
  19,34 €
• 
  Universal Thread Gauge - 4pc. For individual gauges measuring pith and thread
  17,76 €
• 
  Scraper spare blades for 20484 (5 St)
  6,84 €
• 
  Drilling tool set in the wood stand. Equipped with ever drilling tools a 2mm
  54,44 €

Universal spray WD40, rust remover corrosion protection, with water resistant characteristics

contact spray. 400ml.

Console for a radio in DIN measurements. The console is mounted under the dashboard. Uinversal

fitting, e.g. Citroen 2CV, DS. Dimension cutout for radio: 182 x 53mm. Dimension outside: Height: 76mm. Wide above 250mm (down 220mm). Deep one: 175mm.

Under cover from strengthened plastic fabric (for the seat + backrest). Suitable for Citroen 2CV

This cover is mounted instead of the jute covers.

Undercover made of reinforced plastic fabric - seat bench front or rear (for the seat + backrest)

Suitable for Citroen 2CV. This cover is fitted instead of the jute covers. The plastic fabric is much more durable.

Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter of doses, very high

quality.

• Suitable for this article
• 
  Cavity preservation on wax basis, for cavity pistol, 1 litre.
  20,73 €
• 
  Underbody coating + stone guard to squirt, for underbody protection pistol
  10,81 €
• 
  stone guard MOTIP, colour grey for spray gun, 1000ml
  16,76 €

Underbody coating + stone guard to squirt, for underbody protection pistol. 1000ml

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Underbody coating to paint with brush, 1000ml

Vacuum diaphragm, pulldown, for the Choke (cold engine starting). Suitable for Citroen 2CV6. The

diaphragm is mounted at the carburetor above. Or. No.: 95568478

• Suitable for this article
• 
  Seal under accelerator pump 2CV6. (2CV with oval carburetor). Made in Germany.
  1,96 €

Protection plate for the engine, for the original chassis. Suitable for Citroen 2CV, AK400, Mehari

This extremely heavy sheet metal is an accurate reproduction of the original protection plate, which was offered by Citroen. Made in Germany.

Chock block from wood. Like original. Suitable for Citroen 2CV

USB A+C adapter (12 volt) for cigarette lighter. The adapter has 2 connections. 1x USB-A (the large

wide plug) and 1x UBB-C (the new small plugs).

Outlet valve for 2CV6, per unit. 34 x 87,1 x 8,5mm. Or.no.: 95536027

• Suitable for this article
• 
  Inlet valve for 2CV6, 40 x 88,4 x 8 mm. Or.no.: 95536026
  10,81 €
• 
  Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3
  1,94 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €

Inlet valve for 2CV6, 40 x 88,4 x 8 mm. Or.no.: 95536026

• Suitable for this article
• 
  Outlet valve for 2CV6, per unit. 34 x 87,1 x 8,5mm. Or.no.: 95536027
  12,79 €
• 
  Valve spring cotter for Citroen 2CV6, final version. The valve stem has 3
  1,94 €
• 
  universal valve spring cpmpressor, for the development of the valves + valve
  48,49 €

Valve clearance adjustment screw, suitable for Citroen 2CV6 + 4. Measurement: 7x17,5mm, overall

ll length 25mm. Or.Nr. A124-4

Valve (rubber valve) for rim. Suitable for Citroen 2CV, DS, CX, HY, GS. Renault R4, R5, R6, R8

R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 42,5mm.

Valve long (rubber valve) for rim. To uses this long valve, if the rim has a large wheel cover

(with cutout for the valve). Suitable for Citroen DS, CX, HY, GS. Renault R4, R5, R6, R8, R10, rear engine. Peugeot 203, 403, 404, 504, 604, 204, 304, J7. For valve hole: 11,3mm. Length: 61,5mm.

Valve extractor + lifter (tire valve)

Valve cap reproduction, galvanizes, for Citroen 2CV4 + 2CV6. Or.Nr. 75478957. The valve cap is

tightened frequently too strongly, and licks then oil.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer
  1,64 €
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

2CV starting from 1971, stud bolt M7x76mm, for the mounting the valve cap on the cylinder head

Suitable for Citroen 2CV starting from year of construction 1971.

2CV until 1971, stud bolt M7x83,5mm, for the mounting the valve cap on the cylinder head! Suitable

for Citroen 2CV to year of construction 1971.

Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.

• Suitable for this article
• 
  Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer
  1,64 €

Valve cover gasket for Citoen 2CV6 + 2CV4. Material cork.

Valve cover gasket for Citroen 2CV6 + 2CV4. Material rubber. Manufacturer: Original GLASER. Made in

Germany.

• Suitable for this article
• 
  Valve cap nut, suitable for Citroen 2CV6 + 2CV4. Reproduction.
  3,07 €

Special valve cover gasket. Suitable for Citroen 2CV6, Dyane 6, AK400, Mehari, AMI8. Made from

silicone. The valve cover gasket fits around the edge of the valve cover. This makes installation much easier.

Valve grinder suction cup. 1x 16+21mm

Valve grinder suction cup. 1x 28+34mm

Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains

pre-grinding paste (rough) and regrinding paste (fine).

• Suitable for this article

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

valve spring inside (small spring), for inlet + exhaust valve Citroen 2CV6 + 2CV4. Outside

diameter: 22,5mm. Height: 31,5mm. Or.Nr. AM124-9A

Exhaust valve guide for Citroen 2CV6. Length: 42mm, internal diameter: 8.5mm. Top collar (external

diameter): 10.5/12.5mm

Valve guide inlet valve for Citroen 2CV6. Length: 47mm, outside diameter 12,5mm, inside diameter

8,00mm, fit above 10,5/11mm.