for Citroën 2CV ACDY

Choke cable, final version for Citroen 2CV + Dyane. For the square mounting. The choke cable is

illuminated! Or. No. 95597858

Choke cable, latest version for Citroen 2CV + Dyane. For square mounting. The choke cable is not

illuminated!

Autosol chrome polish. 75 ml tube. (Premium chrome shine care). Autosol chrome polish has been

around for ages and has often been copied! Made in Germany.

Citroen emblem (Chevron) on the dashboard. Suitable for Citroen 11CV + 15CV, up to year of

construction 02/1952. Or. No. 802594. Dimension: 38 x 40mm. The emblem can also be used universal.

Citroen angle (emblem), gold-colored. Reproduction made of metal. Or. No. D854-4

• Suitable for this article
• 
  Retaining tie-clip for emblems. Suitable for 2,5mm of pins. Per piece.
  0,55 €

Citroen angle chromium-plates, made of metal. Universal fitting. 2x brackets = 1x 16807

Reproduction

• Suitable for this article
• 
  Emblem - securement tie-clip from synthetic. For 2,5mm emblem pins. Suitable
  0,55 €
• 
  Retaining tie-clip for emblems. Suitable for 2,5mm of pins. Per piece.
  0,55 €

CO adjusting screw, M 5x0,75 mm, (idle mixture adjusting screw), for Solex carburetor. Suitable for

Citroen 2CV (round carburetor). Citroen 11CV, HY, DS. Renault 4CV, Dauphine, R4, Caravelle, Floride. Peugeot 203, 403, 404, 504.

CO regulating screw, 5x0,5 mm, for Solex oval carburetor. Suitable for all Citroen 2CV6 with oval

carburetor.

Pressure spring suitable for the idle air control adjusting screw, for Solex carburetor. For the

following carburetors: 26CBI, 28CBI, 30CBI (AMI6), 26/35PICS, 32PCIS, 34PCIS+PCIS, 34PICS-6

CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to

adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.

Crimping pliers for round plugs. Suitable for the uninsulated round plugs 3mm + 4mm. Brand quality

KNIPEX

• Suitable for this article
• 
  Round plug 4mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber
  19,09 €
• 
  Round plug 3mm. Stuffing contents: 10x plug, 10x sleeve. With suitable rubber
  19,73 €
• 
  round pin plug 4mm, male, like original.
  0,62 €
• 
  Round pin plug, 4mm, feminine
  0,51 €
• 
  round pin plug 3mm, male, like original.
  1,24 €
• 
  Round pin plug, 3mm, feminine
  1,29 €

Damming cover for the front wall in the interior (9 pieces). Completely for above and below

Suitable for Citroen Dyane. Made in France

Damming cover for the front wall below (pedal base) on the left. Suitable for Citroen Dyane +

Acadiane (ACDY).

Damming cover for the front wall below (pedal base) on the right. Suitable for Citroen Dyane +

Acadiane (ACDY).

Damming cover front wall on the left above. Suitable for Citroen Dyane + Acadiane (ACDY).

Damming cover front wall on the right above. Suitable for Citroen 2CV6.

Damming cover front wall on the right above. Suitable for Citroen Dyane + Acadiane (ACDY).

Kunststoff-Teufel® is a highly active and electrolytic cleaning agent. It effortlessly removes the

strongest grease and oil stains, nicotine, soot, burnt-in stains and much more from plastics and other alkali-resistant surfaces. An antistatic and dirt-repellent surface is left on the cleaned surfaces. Kunststoff-Teufel® is the perfect cleaner for household, hobby and business (e.g. ideal for cleaning kitchens, blinds, caravans, garden furniture, tarpaulins, car and truck interiors etc.). 1000ml spray bottle! We ourselves only work with the "Teufelsreiniger" (devil's cleaner). We have only had the best experiences. Made in Germany

Distilled water, 1 litre

Sealing sleeve, for a wheel brake cylinder piston (1.1/8 inch = 28,56mm). Suitable for Citroen HY

Also universal fitting for other vehicles!

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

Seal for drive shaft flange case at the gearbox. Suitable for Citroen 2CV4 + 2CV6 starting from

year of construction 1961). The seal is out of paper. Or. No. AT the 33186A

Fuel pump cover gasket. For fuel pumps with round cover. Almost all available fuel pumps of our

catalog are our own reproductions with removable cover. (round cover with 6 mm screw in the middle). Measurements about 44 x 36mm. 2mm heavily.

• Suitable for this article
• 
  Fuel pre-filter. For fuel pumps with round cover. Almost all available fuel
  3,44 €

Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 1,0mm. The

different thicknesses of the seal are required, to adjust the fuel level of the float chamber.

Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 1,5mm. The

different thicknesses of the seal are required, to adjust the fuel level of the float chamber.

Seal float needle valve. Inside diameter: 9,1mm. Outside diameter: 11,9mm. Heavy one: 2,0mm. The

different thicknesses of the seal are required, to adjust the fuel level of the float chamber.

Seal under accelerator pump 2CV6. (2CV with oval carburetor). Made in Germany.

• Suitable for this article
• 
  Cover plate fur the accelerator box for the Choke, for oval carburetor 2CV6 (If
  1,74 €

Differential bearing for Citroen 2CV6. Inside diameter: 35mm, Outside diameter: 72mm, overall

height completely: 19mm. Taper roller bearing. Or.Nr.: 26203529

Differential shaft gearbox outlet. Suitable for Citroen 2CV, of year of construction 6/1965 to

1990. Length: 15,2cm. 20 splines. Original Citroen. New old stock (NOS).

Torque wrench largely, 40-200Nm. 1/2 " mounting. Professional quality

Torque wrench small, 5-25Nm. 1/4 " mounting. Only for screws with right-hand thread suitably

(torsion in in the clockwise direction).

Roundings/minute-Indicator (laser).Very easy to use: just select a level and confirm to . Ideal for

engine adjustment!

Throttle valve spring for throttle valve shaft outside. First version, suitable for Citroen 2CV6

with oval Vegaser.

Throttle valve spring for the throttle valve shaft. Suitable for 2CV6 starting from year of

construction 1981. (oval carburetor). The spring is mounted at the exterior of the carburetor.

• Suitable for this article
• 
  Throttle valve spring inside, for 2CV6 with oval carburetor. The throttle valve
  3,82 €

Throttle valve spring inside, first version. Suitable for 2CV6 with oval carburetor.

Throttle valve spring inside, for 2CV6 with oval carburetor. The throttle valve spring external has

our Nr.10223.

• Suitable for this article
• 
  Throttle valve spring for the throttle valve shaft. Suitable for 2CV6 starting
  3,77 €

pressure spray gun cavity with hook and cavity nozzle, incl. pre-heating device for Mike Sander

grease

• Suitable for this article
• 
  Semi-fluid grease 4kg, for preserving the cavity, Mike Sander - corrosion
  72,29 €
• 
  Semi-fluid grease 750g, for preventing the cavity, Mike Sanker - corrosion
  18,79 €
• 
  Cavity preservation on wax basis, for cavity pistol, 1 litre.
  20,73 €
• 
  Fertan rust converter, 1 litre, Fertan the market leader with rust-converting
  42,54 €

Push-button switch - universal push-button switch with red push-button (e.g. engine start button)

22mm mounting hole.

Push-button switch - universal push-button switch with black push-button (e.g. motor start button)

22 mm mounting hole.

Push-button switch - universal push-button switch with white push-button (e.g. engine start

button). 11 mm mounting hole.

Push button switch universal, with white push-button (e.g. engine activate button). 16mm

installation hole.

Push-button switch - universal push-button switch with white push-button (e.g. engine start

button). 22mm mounting hole.

German DS Catalogue Retro Future, 400 pages

DS catalogue Retro Future 1. French! 400 pages! Complete catalog Cipere with illustrations

Nozzle gauge from 0.45 to 1.5 mm. 20 nozzle gauges. With these nozzle gauges, you can determine the

diameter of carburettor nozzles. Indispensable for work on the carburettor (e.g. changing the nozzle to original values, calibrating the carburettor, etc.).

Dyane door handle, outside, in front on the left. Color: grey. The door handle are supplied seal

Or. No. AY861-76B

Dyane door handle, outside, in front on the left. Color: black. The door handle are supplied seal

Or. No. AY861-76

Dyane door handle, outside, in front on the right. Color: grey. The door handle are supplied seal

Or. No. AY861-77B

Dyane door handle, outside, in front on the right. Color: black. The door handle are supplied seal

Or. No. AY861-77

Dyane, dashboard label set, for the heater adjustment and the control lights. Suitable for Citroen

Dyane.

Seal under door handles (1 pair). Color grey. Citroen Dyane, Acadyane.