Clutch release lever spring. (Clutch). Reproduction. Suitable for CITROEN 2CV6, starting from year
of construction 1981. Or.Nr.: AM314-9.
for Citroën 2CV Alle
3858 Articles | Page 21 of 78
Clutch release yoke for the clutch. Old version (first 602cc version), suitable for Citroen 2CV
Dyane, AMI. Or.Nr.: AM314.4
Release fork for the clutch. Suitable for Citroen 2CV6, AK, Dyane, last version, from year of
construction 03/1982. The last improved version of the release fork is reinforced compared to the previous version. Of course, our release forks are made of high-quality steel.
Clutch release sleeve 2CV old, AMI6, old version (thrust ring running in ball bearings), for use of
a multi-disk! Also suitable for Renault R4, to year of construction 1970. Renault Dauphine, 4CV. Or.Nr.: AZ 314.01.
Clutch release sleeve 2CV alt/AMI6, old version (graphitic bearing), for use of the original clutch
with 3 levers. The graphitic ring has 49mm outside diameter, 32mm inside diameter. Totally overall height of 20mm. Also suitable for Renault R4 until 1970, Dauphine, 4CV. Or. No.: AZ 314.01 / Made of very high-quality special graphite with a density of 1.9g/cm3
Release ring clutch, for all Citroen 2CV + AMi + Dyane, which have the clutch release yoke above in
the transmission bell housing. (2CV with 9, 12 + 16 HP) of Or.Nr.: A31414
Car cover 2CV, colour red. High quality synthetic fibre, air-permeable. Specially make for 2CV. The
Autocover is for indoor, not for outside!
AZAM, floor pan on the left, for Citroen 2CV AZAM. (De luxe model from Belgium.) The floor pan has
the high curvature for the large suspension pot of the Ami6. Made in Europe.
AZAM, floor pan on the right, for Citroen 2CV AZAM. (De luxe model from Belgium.) The floor pan has
the high curvature for the large suspension pot of the Ami6. Made in Europe.
AK250, rear door left (square window, narrow grooves)), reproduction. Suitable for Citroen AK250
(low box). The door is electrolytically galvanised! Made in Europe.
AZU, rear door left (oval window), replica. Suitable for Citroen AZU (low box). The door is
electrolytically galvanised! Made in Europe.
AZU, rear door right (square window, narrow grooves)), reproduction. Suitable for Citroen AZU 250
(low box). The door is electrolytically galvanised! Made in Europe.
AZU, rear door right (oval window), replica. Suitable for Citroen AZU (low box). The door is
electrolytically galvanised! Made in Europe.
AZU, interior fender at the rear left, in the box body! Suitable for Citroen AZU. 1417mm lengthens
Or.Nr. AZU821-5B. Manufactured in manual work in the European Union.
AZU, interior fender at the rear right, in the box body! Suitable for Citroen AZU. 1417mm
lengthens. Or.Nr. AZU821-5C. Manufactured in manual work in the European Union.
AZU, fender at the rear left, for Citroen AZU. Small corrugated sheet. The fender is
electrolytically galvanized! Made in Europe.
AZU, fender at the rear right, for Citroen AZU. Small corrugated sheet. The fender is
electrolytically galvanized! Made in Europe.
AZU, spare wheel hood for Citroen AZU 250. Small corrugated sheet. The sheet metal is
electrolytically galvanized! Made in Europe.
AZU, backwall at the rear left for Citroen AZU. 1x opening for rear light. The sheet metal goes
completely from downside to above in the box body. Overall length: about 117,5cm.
AZU, rear panel rear left for Citroen AZU. The sheet metal goes completely from the bottom to the
top of the box body. The sheet metal is completely closed (no opening for the rear light). Total length: approx. 117,5cm.
AZU, backwall at the rear right for Citroen AZU. 1x opening for rear light. The sheet metal goes
completely from downside to above in the box body. Overall length: about 117,5cm.
AZU, rear panel rear right for Citroen AZU. The sheet metal goes completely from the bottom to the
top of the box body. The sheet metal is completely closed (no opening for the rear light). Total length: approx. 117,5cm.
AZU, side panel on the left (casing body), for 1 window. Suitable for Citoen AZU. Reproduction out
of sheet metal. Or. No. AZU825-95B
AZU, side panel on the right (casing body), for 1 window. Suitable for Citoen AZU. Reproduction out
of sheet metal. Or. No. AZU825-95C
AZU, front transverse bulkhead (above the roof of the cab), for the box body. Suitable for Citroen
AZU (low box). This is a partial sheet from the whole sheet which was available from Citroen under the number AU825-98. Made in Europe.
AZU, front left bulkhead, for box body. Suitable for Citroen AZU (low box). This is a partial sheet
from the whole sheet which was available from Citroen under the number AU825-98. Made in Europe.
AZU, front right bulkhead, for box body. Suitable for Citroen AZU (low box). This is a partial
sheet from the whole sheet which was available from Citroen under the number AU825-98. Made in Europe.
AZU, tank panel for Citroen AZU 250. Small corrugated sheet. The sheet metal is electrolytically
galvanized! Made in Europe.
AZU, door lock rear inside, for the tail gates. Suitable for AZU tail gate, to year of construction
09/1968. The door lock is without interior latching! Reproduction. Or. No. AZU8619
AZU, square profile (square cross-beam) on the right, centrically, lengthwise over the box body
Suitable for Citroen AZU 250. Made in Europe.
3858 Articles | Page 21 of 78
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
