Wheel 4Jx15 for 2CV (tubeless), original size. Attention: The production of these rims has been discontinued by Citroen

However, the rims are being reproduced close-to-series. The rims are 100% close-to-series in terms of material, all dimensions and the surface coating and correspond to the original equipment standard. We are often asked what a close-to-series rim is. This means that the rim is manufactured by the same factory, on the same machine and with the same materials as the original Citroen rim. The only difference is that Citroen is not the customer. The rim is therefore also approved by the Federal Motor Transport Authority. The wheel basically consists of a rim and a disc. The rim is made from strips that are butt-welded together. The so-called bandage then goes into the rolling operation (normally 2 rolling operations). The disc is then pressed into the rim in the appropriate position. This is known as the press fit. This serves as a fixation for the subsequent welding operation, which is carried out by spot welding. Finally, the entire wheel is coated with a cathodic dip coating to protect it against corrosion and the front is primed in greyish beige. KTL itself is the rust protection. The grey-beige primer is not a final coat. For an optimum appearance, the rims should be painted again. With the reproduction rims known to us, the disc is not pressed in, but only inserted and then welded. (weld seams). These rims therefore have no so-called press fit. But the press fit is what gives the entire wheel its strength. As it is extremely expensive to remanufacture a wheel with a press fit, savings are made on this. That's why our rims are a little more expensive, but your safety should be worth it. Because only the wheel with the tyre makes contact with the road. The rim is for tubeless use, but you can also ride it with a tube!
Quality: 2 360°
article-no. 12075
69,32 EUR  incl. 19% vat
(58,25 EUR Netto) shipping costs
on stock, immediately available.
Stock: 68
Needed quantity: 5

Share this product