Citroen-DS-11CV-HY / Alle / intake and exhaust manifold

Exhaust elbow, with securement for an heat protection shield. 4 in 1 manifold. Suitable for Citroen DS, of year of construction 1966 to 1971. Or. No. DV181-81

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €
• Manifold seal exhaust (40mm inside diameter). Suitable for Citroen DS, starting from year of co
  3,56 €
• Stud bolt M8x45, e.g. elbow securement Citroen DS.
  1,74 €
• Exhaust elbow heat protection shield, without outlet for preheating. Suitable for Citroen DS, t
  47,51 €
• M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W
  2,93 €
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to
  24,69 €

Exhaust elbow, without securement for a heat protection shield. 4 in 1 manifold. Suitable for Citroen DS, of year of construction 1962 to 1965. Or. No. DS1811

Quality: 3

• Suitable for this article
• Manifold seal exhaust (33,4mm inside diameter). Suitable for Citroen DS + Citroen HY. Or. No. D
  7,09 €

Exhaust elbow (new part), completely with seals. Suitable for Citroen 15CV. (6 liners). Or. No. 456512

Quality: 3 360°

Exhaust elbow heat protection plate, with isolation (securement with 4 rivets). Suitable for Citroen DS IE.

Quality: 3

Exhaust elbow heat protection plate, with isolation (securement with 8 rivets). Suitable for Citroen DS IE. Or. No. DX181-213A

Quality: 3

Heat protection plate, on the exhaust manifold. Suitable for Citroen DS IE. Or. No. DX181-213A

Quality: 3

Exhaust elbow heat protection shield down and/or inside. Suitable for Citroen DS, with carburetor engine. Or. No. D5414425W

Quality: 3

Exhaust elbow heat protection shield, inside. Suitable for Citroen DS carburetor + injection engines. Completely small adaptation work is possible. Only this heat protection shield is supplyable. Or. No. DX17114

Quality: 3

Exhaust elbow heat protection shield, with outlet for preheating. Suitable for Citroen DS, starting from year of construction 1972. Or. No. DX18114

Quality: 3

Exhaust elbow heat protection shield, without outlet for preheating. Suitable for Citroen DS, to year of construction 1972. Or. No. DS18114

Quality: 3

Exhaust elbow, new part, with all seals. Suitable for Citroen 11CV, starting from year of construction 10/1941. Or. No.456174

Quality: 3

Exhaust elbow, new part. Suitable for Citroen HY + U23, to year of construction 1963. Or. No. 456086

Quality: 3

• Suitable for this article
• Screw M7x20, galvanized
  0,55 €
• Seal between inlet + exhaust elbow + cylinder head. Suitable for Citroen 11CV + Citroen HY to y
  22,71 €
• M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.
  0,88 €

Exhaust elbow, new part. Suitable for Citroen HY, starting from year of construction 1963. Or. No. 5484966

Quality: 3

• Suitable for this article
• Manifold seal exhaust (33,4mm inside diameter). Suitable for Citroen DS + Citroen HY. Or. No. D
  7,09 €
• Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to
  24,69 €

Exhaust manifold, 2-piece. Suitable for Citroen DS, with engines DX2, DX3, DX4, DX5. The manifolds are used, checked, sand-radiated.

Quality: 0

Exhaust clip (elbow clip) fixing bolt M7. Flattened head. Overall length: 56mm. Suitable for Citroen DS. Or. No. 1D5412151D

Quality: 3

Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to the flame tube. Suitable for Citroen DS + Citroen HY. Or. No. 5412150T

Quality: 2

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €
• Exhaust clip (elbow clip) fixing bolt M7. Flattened head. Overall length: 56mm. Suitable for Ci
  4,71 €

Seal between inlet + exhaust elbow + cylinder head. Suitable for Citroen 11CV + Citroen HY to year of construction 1963. 186mm long. Or. Nr.452996

Quality: 3

DS starting from 65, elbow pipe (flame tube), produced from high-grade steel! Suitable for Citroen ID/DS, starting from year of construction 1965. Or. No. D1826A

Quality: 1

DS starting from 65, elbow pipe. Suitable for Citroen ID/DS 19, starting from year of construction 1965. For the engines: DY-DL-DLF-DV-DT. Or. No. DV18251

Quality: 3

• Suitable for this article
• Exhaust clip with fixture (from high-grade steel), for the securement flexible intermediate pip
  22,71 €
• Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to
  24,69 €

DS starting from 65, elbow pipe 2 in 1 (Y-pipe). Suitable for Citroen DS, starting from year of construction 1965. Starting from engine DX. Or. No. DX18244.

Quality: 3

• Suitable for this article
• Elbow pipe seal (Y-pipe), suitable for Citroen DS. 42 mm inside diameters. That is the seal, be
  3,92 €

DS starting from 65, elbow pipe 2 in 1 from high-grade steel (Y-pipe). Suitable for Citroen DS, starting from year of construction 1965. Starting from engine DX. Or. No. DX18244.

Quality: 1

• Suitable for this article
• Elbow pipe seal (Y-pipe), suitable for Citroen DS. 42 mm inside diameters. That is the seal, be
  3,92 €

Cap nut, securement exhaust manifold. Suitable for Citroen 11CV + 15CV. Thread: M10 x 150. Or. No. 309278

Quality: 3

Elbow seal at the cylinder head. Suitable for Citroen 15CV. Or. No. 456513

Quality: 3

Manifold seal exhaust (33,4mm inside diameter). Suitable for Citroen DS + Citroen HY. Or. No. DS181-2

Quality: 3

Manifold seal exhaust (40mm inside diameter). Suitable for Citroen DS, starting from year of construction 1965. Or. No. 1D 5412 149G + N181-2

Quality: 3

Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x by car. On the left and on the right the seal 30031 is required. Or. No. DX141-11 + 1D 5414 063L

Quality: 2

• Suitable for this article
• Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal is required 2x b
  3,23 €

Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal is required 2x by vehicle. In the center, the seal 30030 is installed. Or. No. DX141-12 + 1D 5414 064X

Quality: 3

• Suitable for this article
• Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x by car. On the
  4,71 €

Manifold seal inlet, centrically. Suitable for Citroen DS19, starting from year of construction 7/1959. Citroen HY. Inside diameter: 42mm. Connector long side: 100mm. Connector short side: 61mm. Bore for stud bolts: 8,5mm.

Quality: 3

Manifold seal inlet, centrically. Suitable for Citroen ID19. Dimension: 48x61x37mm.

Quality: 3

Manifold seal inlet, suitable for Citroen ID19. Or. No. N141-11. Inside diameter: 45mm. Connector long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 9,0mm.

Quality: 3

Manifold seal inlet. Suitable for Citroen DS 23.

Quality: 3

Manifold seal inlet. Suitable for Citroen DS, to year of construction 09/1968. Engine: DY, DL, DLF. Citroen HY. Or. No. DY14111. Inside diameter: 46mm. Connector long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 8,0mm.

Quality: 3

Manifold seal inlet. Suitable for Citroen DS19 + Citroen HY. Or. No. DM141-11. Inside diameter: 45mm. Connector long side: 103mm. Connector short side: 62mm. Bore for stud bolts: 9,0mm.

Quality: 3

Manifold seal inlet. Suitable for Citroen ID19 + Citroen HY. Or. No. DM141-11B. Inside diameter: 39mm. Connector long side: 100mm. Connector short side: 62mm. Bore for stud bolts: 8,1mm.

Quality: 3

Manifold seal, between inlet + exhaust. Suitable for Citroen 11CV. Dimension: 58 x 74mm. Or. No. 453095

Quality: 3

Elbow pipe seal (Y-pipe), suitable for Citroen DS. 42 mm inside diameters. That is the seal, between exhaust manifold + Y-pipe (exhaust). Per piece.

Quality: 3

copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper nuts: no rust, no sticking!

Quality: 2

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.

Quality: 3

M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.

Quality: 3

M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).

Quality: 3

Nut (toggle 42,0mm), for the manifold securement. Suitable for Citroen 11CV with D + Perfo engine. Or. No. 452908

Quality: 3

Nut (toggle), for the securement of the elbow. Suitable for Citroen 11CV with Perfo + D-Engine. Citroen HY, to year of construction 1963. Or. Nr.451331

Quality: 3

P 504/505/J7/HY, exhaust elbow seal, suitable for Indenor Diesel XDP88. Bore 94mm. Suitable for Citroen HY Diesel. Peugeot 504D, 505D, J7D, J9D. Inside diameter: 40 x 30mm. Bore diameter: 9mm. Bore distance from center to center: 64mm.

Quality: 3

P 504/505/J7/HY, intake manifold seal for Indenor Diesel XDP88. Bore 94mm. Suitable for Citroen HY Diesel. Peugeot 504D, 505D, J7D, J9D.

Quality: 3

SM, sealing ring for the intake manifold, suitable for Citroen SM. Measurements: 37.8 x 2.6 x 43,0mm.

Quality: 3

SM, manifold seal for Citroen SM. (Manifold at the cylinder head). Inside diameter: about 33mm. Bore diameter: 8,0mm. Bore distance from center to center: 58mm. Or.Nr. 5406092V

Quality: 3

Stud bolt M7 on M8. 45mm lengths. Special production!

Quality: 2

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €