for Citroën Alle
4594 Articles | Page 42 of 92
Knob (handle) for the sliding window. Suitable for Citroen Dyane, AMI 8 + HY. For 22mm bore in the
window. The smooth part of the knob has a left-hand thread. Do not remove the metal pin that holds the spring inside. retaining nut against the glass (with 2 notches) = not right-handed
Knob from rubber, for the opening mechanism of the Ventilation shutter, suitable for Citroen 2CV
HY, 11CV. With the 2CV of the final years of construction, is the knob also for the headlight vertical adjustment Installed.
Knob for the sliding window. Suitable for Citroen HY + Citroen Dyane. The knob is without latching
For 8-12mm bore in the window.
Knob for opening mechanism of the Ventilation shutter. Color blue, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color cream, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color grey, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color white, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color green, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color orange, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color red, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV the knob was also Installed for the headlight vertical adjustment.
Knob for opening mechanism of the Ventilation shutter. Color black, production from hard plastic
Suitable for Citroen 2CV, HY. 11CV. At the 2CV + AMI6 the knob was also Installed for the headlight vertical adjustment.
Knob round, colour grey, screwable, for heating adjustment and air distribution, bench lock
Reproduction made of metal! Suitable for Citroen 2CV, DS, HY.
Knob round, colour black, screwable, for heating adjustment and air distribution. Reproduction made
of metal! Suitable for Citroen 2CV, DS, HY.
Knob round, chrome plated, screwable, for heating adjustment and air distribution. Reproduction
made of metal! Suitable for Citroen 2CV, DS, HY.
Black sealant putty, e.g. for sealing the windscreen of the Citroen DS. Dimensions: width 10mm
height 5mm, length 2500mm. This putty is also ideal for sealing openings in the engine front wall (cable ducts, choke cables, etc.).
Boot (rear chassis) complete (with axle mount). Suitable for Citroen DS saloon. A rear section made
entirely from new parts for the Citroen DS. Very expensive to make, but unfortunately often the only way to achieve a truly complete restoration! Visually identical to the original!
Luggage compartment, cover sheet for the axle (the sheet metal is screwed only in the luggage
compartment). Suitable for Citroen DS. Or. No. DM453-139
Luggage compartment. Rubber (sheet metal rail) for the luggage compartment seal. This fixture is
mounted on the rear end panel. Suitable for Citroen DS sedan.
Trunk floor reinforcement. Suitable for Citroen DS BREAK + DS Cabriolet. This sheet metal is welded
serial under the trunk floor and prevents oscillations.
Trunk floor. Suitable for Citroen DS sedan, starting from year of construction 1968. Like original
Best quality at the market. The boot floor has 2 holes for a rubber (drain holes). Or. No. D742-97
Baggage compartment floor sheet metal. Suitable for Citroen DS, starting from year of construction
1968. Reinforced version from 1,5mm sheet metal. Very good reproduction! The boot floor has 2 holes for a rubber (drain holes). Or. No. D742-97
Solo boot floor mat. Suitable for Citroen DS. Dimension: 720x810mm. Ready cut to size. Colour black
(material like original)
Luggage compartment lid seal from foam rubber. Suitable for Citroen 11CV, starting from year of
construction 07/1952. Length: 108cm. Or. No. 802676
Luggage compartment lid seal from foam rubber. Suitable for Citroen 11CV, to year of construction
to 07/1952. Length: 225cm. Or. No. 224257
Luggage compartment lid seal. Suitable for Citroen 11CV/15CV, starting from year of construction
07/1952. Length: 260cm. Or. No. 802779
Luggage compartment lid hinge (chromium-plates). Suitable for Citroen 11CV + 15CV, starting from
year of construction 07/1952. Per piece. Or. No. 803276
Push-button (application for the lockcylinder), for the door handles (of year of construction
04/1963 to 1971) + luggage compartment lid (04/1963 to 1971). Suitable for Citroen DS, AMI6, AMI8. Or. No. AM861-20 + DS861-18b + DS861-21 + D861-102 + D861-33
Boot handle: Boot lid handle (without lock insert, without lower seal). Suitable for Citroen DS
Pallas. Or. No. DX861-59B. Attention: The thread is unfortunately flattened at 12 + 6 o'clock instead of the original 9 + 3 o'clock. However, a quick work over with the angle grinder and it fits again. Unfortunately, there is no alternative on the market. This one or none.
Rubber seal under the luggage compartment handle. Suitable for Citroen DS. Dimension: 30 x 36 x
2mm. Or. No. 5416871H. Made in Germany.
Luggage compartmend lid BREAK. Support rail for the rubber down in the luggage compartmend lid
Suitable for Citroen DS BREAK. Length: 110cm.
Luggage compartment hood seal above (between back window and hood). Suitable for Citroen DS sedan
Length: about 160cm. Or. No. D853-66
Luggage compartmend lid, out of sheet metal (very good reproduction). Suitable for Citroen DS
sedan. Or. No. DM844-19
Luggage compartment hood. Sheet metal bracket on the left, for the mounting of the spring cartridge
from the luggage compartment hood (mounts on the interior fender). Suitable for Citroen DS sedan.
Luggage compartment hood. Sheet metal bracket on the right, for the mounting of the spring
cartridge from the luggage compartment hood (mounts on the interior fender). Suitable for Citroen DS sedan.
Luggage compartmend lid. Tnternal reinforcement plate, rear crosswise under the luggage compartmend
lid. Suitable for Citroen DS sedan. Very good reproduction.
Luggage compartmend lid hinge (1 pair). Suitable for Citroen DS Cabrio. The hinges are completely
for on the left + on the right. Or. No. DS844-013 + DS844-013A.
4594 Articles | Page 42 of 92
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
