for Citroën Alle

Fender in front on the right. Repair sheet metal Top quality (interior sheet metal - reinforcing

plate) for the turn signal mounting (under the headlamps). Suitable for Citroen DS, starting from year of construction 1967. Made one in Germany

Front right wing: Complete rubber set (seals) for the complete mudguard incl. retaining clips. All

necessary seals and clips are included. If everything wants to be new (and often should be). Suitable for Citroen DS (new front), after year of manufacture 1967.

Fender in front, plug for the guiding spike. Suitable for Citroen DS (fender fixture at a-post)

Diameter: 28mm. Or. No. ZC9613022U

Fender sealing trim, 2 pieces. Suitable for Citroen HY, for the front fenders. Or. No. H851-96A

Fender sealing trim in black, universal fitting, by meters. Customer cut, return not possible!

Fender sealing trim (1 set for all 4 fenders). Suitable for Citroen 11CV. Color: black shining. Or

No. 807811

Wing protection (1 pair) with solenoid! Indispensably for workshop jobs!

Universal joint drive shaft: Cover plug for the joint. Diameter: 34mm. Suitable for Citroen DS. Or

No. DX373-93

Universal joint drive shaft: Sealing ring (nylon), down in the universal joint. Suitable for

Citroen DS. Dimension: 23 x 32 x 3,6mm. Or. No. DS372-98

Universal joint for the drive shaft wheel side. Suitable for Citroen 11CV + 15CV. The universal

joint has centrically a hole. Dimension: 75x27mm. Or. No. 441720

Universal joint for the drive shaft. Suitable for Citroen 11CV. Dimension: 60 x 27,02mm. Or. No

441721

Crown nut for the wheel bearing at the rear axle. Suitable for Citroen 11CV + 15CV. Or. No. 421024

Crown nut for the brake drum on the left (right-hand threads). Suitable for Citroen 11CV. Thread

M26 x 150. Or. No. 426591

Crown nut M12 x 1,75. Suitable for the steering arm + tie rod. Citroen 11CV + 15CV.

Castle nut, M14X1,5. Low version

Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U

Elbow seal at the cylinder head. Suitable for Citroen 15CV. Or. No. 456513

Manifold seal exhaust (33,4mm inside diameter). Suitable for Citroen DS + Citroen HY. Or. No

DS181-2

Manifold seal exhaust (40mm inside diameter). Suitable for Citroen DS, starting from year of

construction 1965. Or. No. 1D 5412 149G + N181-2

Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x by car. On the left

and on the right the seal 30031 is required. Or. No. DX141-11 + 1D 5414 063L

• Suitable for this article
• 
  Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal
  3,23 €

Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal is required 2x by

vehicle. In the center, the seal 30030 is installed. Or. No. DX141-12 + 1D 5414 064X

• Suitable for this article
• 
  Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x
  5,86 €

Manifold seal inlet, centrically. Suitable for Citroen DS19, starting from year of construction

7/1959. Citroen HY. Inside diameter: 42mm. Connector long side: 100mm. Connector short side: 61mm. Bore for stud bolts: 8,5mm.

Manifold seal inlet, centrically. Suitable for Citroen ID19. Dimension: 48x61x37mm.

Manifold seal inlet, suitable for Citroen ID19. Or. No. N141-11. Inside diameter: 45mm. Connector

long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 9,0mm.

Manifold seal inlet. Suitable for Citroen DS 23.

Manifold seal inlet. Suitable for Citroen DS, to year of construction 09/1968. Engine: DY, DL, DLF

Citroen HY. Or. No. DY14111. Inside diameter: 46mm. Connector long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 8,0mm.

Manifold seal inlet. Suitable for Citroen DS19 + Citroen HY. Or. No. DM141-11. Inside diameter

45mm. Connector long side: 103mm. Connector short side: 62mm. Bore for stud bolts: 9,0mm.

Manifold seal inlet. Suitable for Citroen ID19 + Citroen HY. Or. No. DM141-11B. Inside diameter

39mm. Connector long side: 100mm. Connector short side: 62mm. Bore for stud bolts: 8,1mm.

Manifold seal, between inlet + exhaust. Suitable for Citroen 11CV. Dimension: 58 x 74mm. Or. No

453095

Elbow pipe seal (Y-pipe), suitable for Citroen DS. 42 mm inside diameters. That is the seal

between exhaust manifold + Y-pipe (exhaust). Per piece.

Ball - sliding nut in the steering gear. Suitable for Citroen 11CV + 15CV. Measurement: 36.8 x

23,5mm. Or.Nr. 601843

Ball for the synchronous unit + reverse gear (6,35mm). Suitable for Citroen 11CV + 15CV.

Ball pin (2x) with bearing shells (4x), for the steering gear. Suitable for Citroen HY, starting

from year of construction 04/1969. Ball pin length: 84mm. Thread: M12 x 1,5. Or. No. HY442-100. Bearing shells diameters: 28mm. Amount: 11,7mm. Or. No. HY442-242A. Since the year of construction 05/1972, the bearing shells are Installed.

Ball pin sealing. Suitable for Citroen DS, to year of construction 1966. Inside diameter: 21,5mm

Or. No. DS413-85

Ball pin setting shim down (front axle). Suitable for Citroen DS + Citroen SM. Dimension: 41.7 x

48,4mm. Heavy 5.50>5,51mm. Or. No. DX41304R

Ball pin collar retaining clip (for the lower ball pin). Suitable for Citroen DS + Citroen SM. Or

No. 1D5410072K

Ball pin nylon disk (fitting down + above). For Citroen DS, starting from year of construction

1965. Or. No. DS443-94

Ball pin repair set above. Suitable for Citroen HY. Length: 84mm. Or. No. ZC9441176U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €

Ball pin repair set down. Suitable for Citroen 15CV + Citroen HY. Length: 105mm. Or. No. 441177 +

ZC9441177U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €
• 
  Locking plate, for a ball joint at the front axle. Suitable for Citroen HY. Or
  2,82 €

Ball bearing (double-row angular contact ball bearing) for the primary shaft. Suitable for Citroen

11CV. Dimension: 25 x 62 x 25,4mm. Manufacturer: SKF. Or. No. 500 535

Ball bearing for the clutch release sleeve. Suitable for Citroen DS with diaphragm (multi-plate

clutch). Installed from year of manufacture 1970.

• Suitable for this article
• 
  Clutch release sleeve, for clutch Diafragma. Suitable for Citroen DS, starting
  32,63 €

Ball bearing for the clutch release sleeve. Suitable for Citroen DS, with 3 finger clutch

Installed from year of construction 1965 until 07/1972.

• Suitable for this article
• 
  Clutch release sleeve, with recess (eye). In the exchange. Suitable for Citroen
  104,03 €

Ball bearing for the fly wheel. Suitable for Citroen HY. Inside diameter: 17,0mm. Outside diameter

40,0mm. Overall height: 12,0mm.

Front ball bearing, for the bearing of the water pump axle. Suitable for Citroen 11CV. Dimension

42 x 15mm. Thickness: 13mm. Or. No. 89951

Ball bearing, for primary shaft. Suitable for Citroen DS. Dimension: 30 x 62 x 16mm. Or. No

ZC9620159

Balls (15 pieces) for the bearing seat of the torsion bar suspension. Suitable for Citroen HY

Diameter: 3,97mm. Per side are 15 balls mounted. Or. No. ZD 9411 200 U

Ball cup completely above. (Wheel suspension). Fixture for the upper pin of the wheel hub. Suitable

for Citroen 11CV. Diameter: 52mm. Or. No. 426607

Ball cup down (front axle). Suitable for Citroen 11CV. Diameter: 60mm. Or. No. 426613

Ball valve for Solex carburetor 30/32/34 PICS. Suitable for Citroen 2CV4 + 2CV6 with single

carburetor (round carburetor). Also suitable for Peugeot + Renault.

Radiator (in the exchange), suitable for Citroen HY petrol, starting from year of construction

1966. Made in Germany. The radiator is completely dismantled and cleaned. Radiator glass blasting, radiator core renew, radiators checked for tightness and radiators completely painted. Plus 250 Euro Old part deposit.

• Suitable for this article
• 
  Radiator cap, suitable for Citroen DS, to year of construction 07/1972 + HY
  16,65 €