M9, nut M9x1,25. Low (flatten) version. Amount: 5mm. E.g. for the valve cover screw connection on
the 11CV with D-engine. Or. No. 2372-S
for Peugeot 404
1478 Articles | Page 13 of 30
Magnetic lifter flexible + washing nozzles adjustment tool. This magnet lifter can be extended up
to 592mm and is flexible at the end. Also the nut in the intake tract far behind is brought out with it again! Additionally it has a steel needle in the handle, with which washing nozzles can be adjusted.
Magnetic bowl, stainless steel bowl with magnetic base and soft rubber shell. Very useful to
collect small parts! 150 mm diameter
Shock absorber boot (bellows on the shock absorber). Diameter: 50mm + 20mm. Suitable for Peugeot
204, 304, 404 (from 1965), 504, 505, 604. Per piece. Or. No. 5254.07
Shock absorber boot (bellows on the shock absorber). Diameter: 50mm. Suitable for Peugeot 404, up
to year of construction 1964. per piece. Or. No. 5254.05
Collars clip strap with lock (made from metal). Overall length: about 500mm. Width: 5,0mm. These
universal clip straps were in former times Installed at many French car´s. So also at radiator hoses, collar drive shafts etc.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 250mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Earth cable (battery ground strap), with battery pole clamp and eye ring. Length: 285mm. Made one
in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 300mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp ring tongue. Length: 350mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 400mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Ground cable (battery ground strap), with battery pole clamp and ring tongue. Length: 500mm. Cable
diameter: 22mm ². Made in the European Union. Universal fitting.
Open-end spanner - ring spanner set (8 pieces) for inch thread (1/8 - 9/16 Withworth). Many brake
parts on French classic cars often have an inch thread!
Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil pans, valve cap
valve timing cover. Very good quality. Made in Germany.
HYLOMAR engine sealing material, permanent elastic engine sealing, indispensable with engine
e overhaul, 80ml. Hylomar M is temperature resistant between -50°C and +250°C and can be applied for sealing sealing surfaces and threaded pieces.
Engine gasket set (inclusive cylinder head gasket 1,5mm) Diesel. Suitable for engines: XD88
XDP88-BD, XDP88-BDS, XD90 (1948ccm). Bore: 94mm. Suitable for Peugeot 404 D, 504 D, J7 Diesel. Citroen HY Diesel. Installed from year of construction 1963 to 1975. Inclusive shaft seals. Or. No. 0198.14
Engine gasket set (inclusive cylinder head gasket) Indenor Diesel. For engine: TMD85, XDP85
TMD85-AD, XPD (1816cc). Suitable for Citroen HY Diesel. Peugeot of 403 Diesel, 404 Diesel, 504 Diesel, J7 Diesel. Without shaft seals. Or. No. 0198.24
Engine oil HTX 20W-50, from TOTAL/elf. Special oil for classic cars with petrol engine from 1950
5 Litre can. Mineral multi range motor oil for engine technology with oil filter from the fifties on. HTX 20W50 is positioning between soft alloyed one range motor oils and modern lubricants. HTX 20w50 provides motor best armoring for classic engines and warrants optimal oil pressure conditions also at high engine loading level. All seasons motor oil! Rust and corrosion protection for vehicles kept inactive for long periods of time.
PDF FILE 
VIDEO 
Engine oil Castrol Classic 20W50, filled up in a beautiful sheet metal can. Special oil for classic
cars with petrol engine from 1950 ! 5,0 Litre can. Mineral multi range motor oil for engine technolgy with oil filter from the fifties on. Castrol Classic 20W50 is positioning beetween soft alloyed one range motor oils and modern lubricants. Castrol Classic 20w50 provides motor best armoring for classic engines and warrants optimal oil pressure conditions also at high engine loading level.All seasons motor oil ! Price per liter: EUR 11,78
Multimeter digital. Dimension: 74x145x40mm. Measuring range: Volt direct current + alternating
current. Ampere, resistance, continuity tester. Everything what you need, for car electrical connection.
Sewing thread for outdoor use, for soft tops and sunroofs. 100% polyester continuous filament
Length: 3000 metres. Strength: 40. UV resistant, high tensile strength + low stretch, high abrasion resistance, washable and resistant to chemicals. Recommended needle size: 120-140.
Rivet for the brake shoe. Universal suitable e.g. for 11CV / 15CV / HY / 203 / 403 / Fregate etc
For Citroen 11CV/15CV, you require 92 pieces. Dimension: 4mm diameter. Shaft length 8mm.
O-Ring Assortment, 386 pcs. 32 sizes R-01 - R-32, inner-ø 3-44 mm, oil-, petrol- and
acid-resistant. Made in Germany.
Oil drain screw (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm (interior
square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6. Or. No. 0311.07 + 0311.04
Oil drain screw magnetic (engine, Peugeot gearbox, Peugeot rear axle). Thread: M18 x 1,5mm
(interior square). Suitable for Peugeot 203, 403, 404, 504, J7. Suitable for all engines. Renault R4. Citroen HY Diesel + AMI6 with M4 engine, AZAM6
Oil drain screw magnetic (interior square 8x8). Thread: M16 x 1,5. Suitable for Peugeot 204, 304
404, 504, 604, 505, J5, J7, J9. Renault R5. Citroen CX, BX, ZX, C15. Or. No. 2221.11
Oil drain screw with valve. Thread M16 x 1,5. This valve is mounted instead of the original oil
drain screw. Simply remove protecting cap - tighten hose - then the valve opens. Protecting cap mount - valve closed. Everything without tool. No dirty and burned hands. No oil on the floor. 10637 is a neccesary item. And only 1 time mounting. That preserves the thread in the oil pan (those are often no longer supplyable). Completely manufactured in Germany! The thread M16 x 1.5 was Installed in: Citroen 2CV, DS, HY, 11CV, GS. Nearly all classical Peugeot (403, 404, 504, 304, 204)
Oil drain screw without magnet (interior square 8x8). Thread: M16 x 1,5. Suitable for Peugeot 204
304, 404, 504, 604, 505, J5, J7, J9. Renault. Citroen CX, BX, ZX, C15. Or. No. 0163.93
Oil drain screw seal 18 x 24 x 2mm (for M18 thread). Suitable for Peugeot 203, 403, 404, 504, 505
J7 (all engines). Renault R4. Citroen HY. AMI6 with M4 engine. Oil cooler screwed joint 2CV with 16HP!
Gasket for oil drain plug for 2CV6, BX, XM, 204, 203, 304, 404, 504. inlet + exhaust screw
measure: 16,3x22x2mm. Version C, curved with a seal inside. (PTFE)
1478 Articles | Page 13 of 30
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
