for Peugeot Alle

P 404/504/505/J5, engine gasket set. Suitable for Peugeot 404, 504, 505, J5, J7, J9. Petrol engines

1.6 + 1,8L (XM7, XM7A, XC7, XC7P, XM, XM7P). 86 mm bore. Inclusive Cylinder head gasket. Original supplier! Delivery without liners sealing rings!

• Suitable for this article
• 
  P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine
  7,28 €

Bushing bumper rear for Peugeot 404 from 04/1963 to 12/1971. For 504 from 06/1968 to 02/1971 and

for 604 from 09/1979 to 05/1983. Inside diameter: 12mm, outside diameter: 30mm, heigth: 24mm.

P 404/504/604, elbow tubing seal above (fusion exhaust pipe to the exhaust elbow). Suitable for

Peugeot 404. Peugeot 504, J7. Peugeot 604, starting from serial number 655429 (for 604, you need 2 pieces). Outside diameter: 57mm. Inside diameter: 43mm. Or. No. 1710.07

P 404/504/604/J7, clutch master cylinder sealing set. For piston diameters: 19mm. Suitable for

Peugeot 204, 304, 404, 504, 505, 604, J7.

P 404/504/694/J7/HY, cylinder head gasket Diesel, for engines XD4.88, XDP4.88, XDP4.90, XDP88

XDP90, XDPX90. (1948cc + 2112cc). Suitable for Peugeot 404 D, 504 D, 604 D, J7 Diesel. Citroen HY Diesel. Or. No. 0203.70

P 404/504/C25/J5, cylinder head gasket. Suitable for Peugeot 404, 504, 505, J5, J7, J9. Citroen

C25. Suitable for petrol engines 1,6L + 1,8L. Installed starting from 09/1970 ((XM7, XM7A, XC7, XC7P, XM, XM7P). 1,73mm heavily. 4 grooves.

P 404/504/HY, engine gasket set Indenor Diesel XDP88. Bore 94mm. Suitable for Citroen HY Diesel +

Peugeot 404 D + 504 D. Without shaft seals

• Suitable for this article
• 
  Engine oil Castrol Classic 20W50, filled up in a beautiful sheet metal can
  62,38 €
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

P 404/504/J5, connecting rod bearing screw. Suitable for Peugeot 404 Diesel, 504D, 505D, J7D, J9D

Suitable for engines 2,1L, 2,3L, 2,5L. Diameter: 10,25mm. Length: 58mm. Per piece. Or. No. 0607.16

P 404/504/J7, piston + liner (4 pieces), suitable for Peugeot 404, J7 + 504. For engine: XC7, XC7P

Engine capacity: 1618cc. Compression: 7,6: 1. Bore: 84mm. Piston pin: 23 x 70mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 93mm. Height totally: 136,20mm. Outside diameter above: 99,20mm. Height from downside to bulge (base) of the liner: 90,03mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 404/504/J7, generator 12V, 50A, for Peugeot cars with control light! Single swivel arm

installation system on the right of 20°.

P 404/504/J7/C25, air filter. Suitable for Peugeot 504, starting from year of construction 10/1970

The air filter also partly fits in Peugeot 404, J7 + Citroen C25. Outside diameter: 119mm. Inside diameter: 91mm. Height: 170mm.

P 404/HY, thrust ring for the clutch pressure plate. Suitable for Peugeot 404. Citroen HY, of year

of construction 10/1968 to 1981.

P 404/HY, water pump. Suitable for Peugeot 404 Diesel. Citroen HY Diesel. Engine XD88. Installed

from year of construction 1960 to 1975. Or. No. 1202.44 + 1202.90

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €
• 
  Spring washer M7
  0,20 €
• 
  Distilled water, 5 liters. For radiator filling. Tap water contains harmful
  4,95 €
• 
  GLACELF CARTECH antifreeze concentrate from Total (must be mixed with distilled
  8,88 €
• 
  Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at
  2,58 €

P 404/HY, water pump seal. Suitable for Peugeot 404 Diesel. Citroen HY Diesel. Engine XD88

Installed from year of construction 1960 to 1975. Or. No. 1206.07. Made in Germany.

P 404C, end section for the door seal on the right. Above at the door. Suitable for Peugeot 404

Cabrio. Or. No. 9032.08. Original Peugeot, no reproduction.

P 404C, seals (2 item) for the triangle window (quarter vent window). Suitable for Peugeot 404

Cabriolet.

P 404C, set of floor mats (4 pieces). Velour Exellence dark blue (Bleu marine) with dark grey (Gris

foncé) vinyl border trim (front only). Suitable for Peugeot 404 convertible + coupe. Very good carpet quality (weight 2000g per square metre). Made in France. Very beautifully finished.

P 404C, set of floor mats (4 pieces). Velour Exellence black with dark grey (Gris foncé) vinyl

border trim (front only). Suitable for Peugeot 404 convertible + coupe. Very good carpet quality (weight 2000g per square metre). Made in France. Very beautifully finished.

P 404C, rubber buffer for the bonnet (locks at the body, in the engine compartment). Suitable for

Peugeot 404 Cabriolet + Coupe. Or. No. 7908.16

P 404C, foam material (backrest) for 1 seat in front. Suitable for Peugeot 404 Cabrio + 404 Coupe.

P 404C, foam material (seat face) for 1 seat in front. Suitable for Peugeot 404 Cabrio + 404 Coupe.

P 404C, coverings (2x seat in front, 1x seat bench rear). Color: Vinyl black. Suitable for Peugeot

404 Cabrio.

P 404C, coverings (2x seat in front, 1x seat bench rear). Color: Vinyl black. Suitable for Peugeot

404 Coupe.

Carpet set of cognac, for Peugeot 404 Coupe + Cabrio. 4 pieces, foam material lamination. The 404

Cabrio + Coupe have only in front carpet. Rear original is always a form rubber mat Installed! Only suitable for steering columm gear shift!

• Suitable for this article
• 
  2CV, Soft top hood, push-button lower part at the body. 2x on the soft top hood
  0,79 €

Carpet set of dark-blue, for Peugeot 404 Coupe + Cabrio. 4 pieces, foam material lamination. The

404 Cabrio + Coupe have only in front carpet. Rear original is always a form rubber mat Installed! Only suitable for steering columm gear shift!

• Suitable for this article
• 
  2CV, Soft top hood, push-button lower part at the body. 2x on the soft top hood
  0,79 €

Carpet set of black, for Peugeot 404 Coupe + Cabrio. 4 pieces, foam material lamination. The 404

Cabrio + Coupe have only in front carpet. Rear original is always a form rubber mat Installed! Only suitable for steering columm gear shift!

• Suitable for this article
• 
  2CV, Soft top hood, push-button lower part at the body. 2x on the soft top hood
  0,79 €

Carpet set of wine-red, for Peugeot 404 Coupe + Cabrio. 4 pieces, foam material lamination. The 404

Cabrio + Coupe have only in front carpet. Rear original is always a form rubber mat Installed! Only suitable for steering columm gear shift!

• Suitable for this article
• 
  2CV, Soft top hood, push-button lower part at the body. 2x on the soft top hood
  0,79 €

P 404C/403, protecting cap connection tail lamp. Suitable for 403 + Peugeot 404 Cabriolet + Coupe

Or. No. 6355.01

P 404D, exhaust pipe at the front, in front of the silencer. Suitable for Peugeot 404 Diesel Pick

UP, from 1967. Or. No. 1701.59

P 404D, elbow pipe - exhaust pipe at the front. Only suitable for Peugeot 404 Diesel. Or. No

1701.66

P 404D, radiator, suitable for Peugeot 404 Diesel (saloon, estate, pick-up). Length 378mm. Width

530mm. Depth 38mm. Or. No. 1300.20

Piston + liner (1 fitting), suitable for Peugeot 404 Diesel, 504 Diesel, Peugeot J7 Diesel. Citroen

HY Diesel. For engine: XD8, XDP4/88. Engine capacity: 1948ccm. Bore: 88mm. Piston pin: 28 x 72,0mm. Piston rings: 2,0 - 2.0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 96mm. Height totally: 173,10mm. Outside diameter above: 106,30mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

Piston + liner (4 fittings), suitable for Peugeot of 404 Diesel, 504 Diesel, Peugeot J7 Diesel

Citroen HY Diesel. For engine: XD8, XDP4/88 (1 series). Engine capacity: 1948cc. Bore: 88mm. Piston pin: 28 x 74,40mm. Piston rings: 2,0 - 2.0 - 4,5mm. Dimensions of the liner = outside diameter down: 94mm. Height totally: 173,20mm. Outside diameter above: 104,90mm. Height from downside to bulge (base) of the liner: 129mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504 BREAK, central silencer. Suitable for Peugeot 504 BREAK, of year of construction 04/1971 to

1983. Or. No. 1750.30

P 504 BREAK, Y-pipe - elbow pipe. Suitable for Peugeot 504 BREAK (1,8L petrol), of year of

construction 01/1968 to 12/1972. Engine: XM7. Or. No. 1701.86

P 504 Cabrio + Coupe/hand brake cable from handle to guide roller. (First cable) 504 starting from

m 12/1970. Lengthens 1850mm, socket 1440mm. Or.Nr.474537.

P 504 Cabrio + Coupe / hand brake cable from handle to guide roller. (First caple) 504 from 12/1968

8 to 12/1970. Lengthens 1850mm, socket 1450mm. Or.Nr.474523

P 504 Cabrio 2.0/hand brake cable on the left of or on the right fitting. Installed from 10/1972 to

o 9/1976. Lengthens 1655mm, socket 1130mm.

P 504 Cabrio 2,0. Hand brake cable (on the left of or on the right suitable), for Peugeot 504

Cabrio 2,0L. Installed from year 1969 to 09/1972 (Salon 1972). Length: 1020mm. Casing length: 770mm. Or. No. 4834.38

P 504 Cabrio, reflector set (4 pieces) without headlight glass (only the chrome-plated reflector)

Suitable for Peugeot 504 Cabriolet + Coupe, from 1975 (phase 2 + 3). Or. No. 6225.18

P 504 Cabrio, connecting metal at the rear left (behind the end point of the rear fender). Or. No

8521.31 / Original Peugeot, no reproduction!

P 504 Injection, pistons + liner (4 item). Suitable for Peugeot 504 Incection, starting from year

of construction 1970. Engine: XM. Bore: 84,0mm. Engine capacity: 1796cc. Piston rings: 1,5 + 2.0 + 4,0mm. Piston pin: 23 x 70mm. Outside diameter down: 93,0mm. Outside diameter above: 99,20mm. Height totally: 136,20mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504 Injection, pistons + liner (4 item). Suitable for Peugeot 504 carburetors + Injection, of

year of construction 1969 to 1970. Engine: XM, XM1, KF5, KF6. Bore: 84mm. Engine capacity: 1796cc. Piston rings: 1,5 + 2.0 + 4,0mm. Piston pin 23 x 70mm. Outside diameter down: 89,0mm. Outside diameter above: 99,0mm. Height totally: 136,20mm.

• Suitable for this article
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504 PU, seat cover. Color: Vinyl brown. Suitable for Peugeot 504 Pick UP.

P 504 V6 Cabrio + Coupe. Hand brake cable, fits on the left of or on the right. Installed starting

from year of construction 10/1977. Length totally: 1465mm. Casing: 735mm. Or. Nr.483464

P 504 V6 Cabrio + Coupe. Hand brake cable, fits on the left of or on the right. Installed from year

of construction 07/1974 to 10/1977. Length totally: 1450mm. Casing: 990mm. Or. No. 483450.

P 504V6, chain for the oil pump. Suitable for Peugeot 504 V6. Renault R30, Alpine V6. Wide one: 1

chain link, length: 44 chain links.

P 504 V6, piston ring set (for 1 piston), for 6 liners. Engine: ZNJK. Engine capacity: 2849cc

Bore: 91mm. Piston rings: 1,5mm + 2,0mm + 4,0mm. Suitable for Peugeot 505 V6, 604 V6. Renault 30, Alpine V6.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

P 504 V6, elbow tubing seal in front, suitable for Peugeot 504 Cabrio V6 + Coupe V6. 57mm outside

diameter. Or. No. 1710.07

P 504 V6, radiator (new part). Suitable for Peugeot 504 V6 convertible + coupé. Attention, only

suitable for manual gearboxes with 4 + 5 gears. Not for automatic transmissions! Peugeot 604 with manual transmission. Or. No. 1300.78