for Peugeot Heckmotor

R8, coverings (2 x front seat, 1x rear seat). Suitable for Renault R8 Major. Material: Vinyl black.

R8/10, exhaust silencer, with long connecting piece. Suitable for Renault R8 + R10, for all engines.

R8/A110, brake power controller. Suitable for Renault R8 + Alpine A110. Comparison number Bendix

141.019

R8/A110, support for tail lamp (2 pieces). Suitable for Renault R8 + Alpine A110.

• Suitable for this article
• 
  R8/A110, taillight cap chromium-plate, suitable on the left or on the right
  89,16 €
• 
  R8/A110, rubber for taillight cap. Suitable for Renault R8 + Alpine A110
  7,54 €

R8/A110, rubber for taillight cap. Suitable for Renault R8 + Alpine A110

R8/A110, taillight cap chromium-plate, suitable on the left or on the right. For Renault Renault 8

Alpine A110.

• Suitable for this article
• 
  R8/A110, rubber for taillight cap. Suitable for Renault R8 + Alpine A110
  7,54 €
• 
  R8/A110, support for tail lamp (2 pieces). Suitable for Renault R8 + Alpine
  116,92 €

R8/A110, taillight cap. Suitable for Renault R8 + Alpine A110. Left or on the right suitable. The

edge of the taillight cap is red.

R8/Alpine 110, tie rod, per piece. The tie rods are specialy produced and adjustable, from 285 to

325mm overall length. Suitable for Renault R8 + Alpine A110. Please compare the dimensions! The tie rods are on the left + on the right identically constructed.

• Suitable for this article
• 
  R8/Alpine 110, collar steering gears, particularly for adjustable tie rods
  9,82 €

R8/Floride S/Caravelle, piston + liner (4 item). Suitable for Renault R8, Floride + Caravelle. Year

of construction 1962 to 1967. Engine: Engine 689 01/02. Engine capacity: 956cc. Bore: 65,0mm. Piston pin: 18 x 57mm. Piston rings: 2,0 + 2.0 + 3,5mm. Outside diameter down: 75,48mm. Outside diameter above: 84,75mm. Height totally: 135,0mm.

• Suitable for this article
• 
  piston ring presenting pliers for diameter 40-100.
  22,71 €
• 
  Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily
  16,76 €

R8/R10, drive shaft. 20 teeth + 10 teeth, length: 545mm. With nut. Suitable for Reanult R8 + R10.

R8/R10, brake pads. Brake system: Bendix. Suitable for Renault R8, R10, Alpine A110. Wide one

95mm. Amount: 40,5mm. Heavy one: 10,2mm. Or. No. 0996038000

R8/R10, brake pads front. Brake system: Bendix. Suitable for Caravelle, R8, R10, Alpine A110. Wide

one: 95mm. Amount: 40,5mm. Heavy one: 10,2mm. The corners lower are chamfered. Or. No. 0996031700.

R8/R10, brake hose rear. Suitable for Renault R8 + R10. Length: 262mm. Thread: 1x female thread 3/8

8 x 24UNF. 1x male thread 3/8 x 24UNF. Made in Europe.

R8/R10, seal underneath the windshield. Seal to the luggage compartment lid. Suitable for Renault

R8 + R10. Length about 1200mm

R8/R10, sealing profile for the front mask. Suitable for Renault R8 + R10. Length about: 120cm

R8/R10, window channel seal outside (4 pieces). Suitable for Renault R8 + R10.

• Suitable for this article
• 
  R8/R10, clip for the window pit seal. Suitable for Renault R8 + R10
  1,59 €

R8/R10, interior window shaft seal. This seal is suitable for universal use. It is 2 metres long

The height is 15.4 mm. The total width, including the felt, is 8 mm. The seal is suitable for the Renault 8, for example.

R8/R10, door window seal for the fixed window in the rear doors (for both sides, 1 set). Suitable

for Renault R8 + R10.

R8/R10, rubber bush for the anti roll bar. Suitable for Renault R8 + R10. Inside diameter: 18mm

Outside diameter: 40mm. Overall height: 25mm.

R8/R10, rubber mat (2 item) for the interior fenders, black. Suitable for Renault R8, R8 Gordini +

R10.

R8/R10, rubber mat in the rear, black. Suitable for Renault R8, R8 Gordini + R10.

R8/R10, rubber mat in front, black. Suitable for Renault R8, R8 Gordini + R10.

R8/R10, clip for the window pit seal. Suitable for Renault R8 + R10

• Suitable for this article
• 
  R8/R10, window channel seal outside (4 pieces). Suitable for Renault R8 + R10.
  84,19 €

R8/R10, luggage compartment seal (by meters). Suitable for Renault R8 + R10. You need about 3

meters! Height: about 31mm. Setting up depth: 13mm.

R8/R10, crankshaft bearing (complete set). Suitable for Renault R8 + R10. Dimension: 0,5 oversize

(2x 25,5mm + 3x 20,3mm).

R8/R10, crankshaft bearing (complete set). Suitable for Renault R8 + R10. Dimension: 0,75 oversize

(2x 25,5mm + 3x 20,3mm).

R8/R10, crankshaft bearing (complete set). Suitable for Renault R8 + R10. Dimension: Standard

dimension. (2x 25,5mm + 3x 20,3mm).

R8/R10, engine gasket set completely, inclusive cylinder head gasket + shaft seals. Suitable for

Renault R8, R8S, R10. Engine: 689-01/03 (956cc). 688-02/06/09 (1108cc).

R8/R10, engine suspension Renault R8 + R10.

R8/R10, bonnet: Rubber buffer for the bonnet. Suitable for Renault R8 + R10.

R8/R10, box sill repair sheet metal on the left, Renault R8, R10, Major. Made in Europe.

R8/R10, box sill repair sheet metal on the right, Renault R8, R10, major. Made in Europe.

R8/R10, tie rod eye (tie rod securement). Suitable for Renault R8 + R10. Thread: M12x1. Made in

Italy

• Suitable for this article
• 
  Nut M12x1
  0,79 €

R8/R10, shock absorber rear (2 fittings). Suitable for Renault R8 Gordini + R10 Gordini. Length

compressed: 250mm. Length extended: 385mm.

R8/R10, door seal (by meters). Suitable for Renault R8 + R10. You need about 13 meters for all 4

doors.

R8/R10, door seal profile, sold by the metre. Suitable for Renault R8 and R10. Height 21 mm, width

13 mm. Cut to customer's specifications - no returns accepted

R8/R10, windshield seal. Suitable for Renault R8 + R10, starting from year of construction 1962

Original suppliers by Renault. Made one in France!

R8/R10/A110, heating hoses (set) on the front of the heating casing. Suitable for Renault R8, R10 +

Alpine A110.

R8/R10/Alpine A110, brake caliper sealing set, rear. Brake system: Bendix. Suitable for Renault R8

R10. Alpine A110. For piston diameters: 32mm.

R8/R10/Alpine, shock absorber front (2 fittings). Suitable for Renault R8 Gordini + R10 Gordini

Alpine A110, starting from year of construction 1968. Matra Jet. Length compressed: 245mm. Length extended: 330mm.

R8/R10/Alpine110, ball and socket joint above, for Renault R8, R10. Alpine A110. Pin height to area

for screwing: 77mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 0996006600

R8/R10/Alpine110, ball and socket joint down, for Renault R8, R10. Alpine A110. Pin height to area

for screwing: 65mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 0996006500

R8/R10/Caravelle, intake funnel for radiator panels. Suitable for Renault R8, R10 and Caravelle.

R8/R10/Caravelle, engine gasket set. Suitable for Renault R8 (1108cc), of year of construction 1964

to 1965. R10 (1108cc), starting from year of construction 1965. Caravelle (R1132, R1133, R119D), of year of construction 1963 to 1965.

R8/R10/Caravelle, cylinder head gasket set. Suitable for Renault R8 (1108ccm), of year of

construction 1964 to 1965. R10 (1108cc), starting from year of construction 1965. Caravelle (1108cc, R1132, R1133), of year of construction 1963 to 1965.

R8/R10/Dauphine, gear knob with emblem. Thread M12x1.75 mm. With adapter for use with 10 mm + 12 mm

shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!

R8/R10/Dauphine, gear knob with Gordini emblem. Thread M12x1.75 mm. With adapter for use with 10 mm

12 mm shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!

R8/R10/Dauphine, gear knob with Renault emblem. Thread M12x1.75 mm. With adapter for use with 10 mm

12 mm shift rod (gear stick). Suitable for Renault R8, R10, Dauphine... Very nice reproduction!

Water pump seal. Suitable for Renault R8, R10, R12, Estafette. Engine: 1,3L. Or. No. 0607154800

R8G/A110, engine gasket set, without cylinder head gasket. Suitable for Renault R8 Gordini R1134 +

Alpine A110 1300VA (1255cc, R1135).