Citroen-2CV / J5 + J7 /

12 Volt cigarette lighter. Universal suitable.

Quality: 3

• Suitable for this article
• Underbody console out of sheet metal, for a cigarette lighter (27mm bore). Black paints. Suitab
  16,76 €
• USB adapter (12 V) for cigarette lighter.
  10,86 €

Turn off valve Diesel (fuel injection system). Suitable for Citroen CX Diesel + TD. Citroen AX Diesel, Visa Diesel, XM 2.1 TD. Citroen C25 CD. Peugeot 205D, 305D, 505D, 604D, J5, J7D. Renault R5 CD, R20D, R25D.

Quality: 3 360°

Starter motor (new part) suitable for Peugeot 404 petrol, starting from year of construction 1967. Peugeot 504 with 1,6L + 1,8L + 2,0L engine. Peugeot J7 petrol. 9 teeth. Rotation in the clockwise direction. Mounting holes, center to center: 106mm. The starter motor is a new part. An old part return is not necessary! Or. No. 5802.82

Quality: 3 360°

High performance starter motor. Suitable for Peugeot petrol engines: 404, 504 (1.6+1.8+2.0L), 505 (2.0L)! 12 Volt, 1.4KW! This smart high-performance starter has an intermediate gearbox. As a result, it has approx. twice the performance of a standard starter motor with half the power consumption and only 3.8kg weight! Based on a DENSO motorsport starter. Thanks to its removable and rotatable mounting plate, the starter motor can be installed in 5 different positions!

Quality: 1

Starter motor, suitable for Peugeot J7 (petrol), J9 petrol. 9 teeth. 12 V. Plus 100 Euro Old part deposit. Or. No. 5802.01

Quality: 2

Anti-slide mat 120 x 100cm (Luggage compartment mat). Individually cutable. Nothing slips in curves or by brake; anti-slide-coats on both sides. For car, boat, caravan

Quality: 3

Sheet metal nut, 2,9. For sheet metal driving screw with 2,9mm core diameter. Dimension: 12.0 x 11,0mm.

Quality: 3

Sheet metal nut, 3,5. For sheet metal driving screw with 3,5mm core diameter. Dimension: 16,50 x 11,0mm.

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €
• Sheet metal driving screw with large head, black galvanizes. Measurements: 3,5 x 16mm.
  0,45 €

Sheet metal nut, 3,9. For sheet metal driving screw with 3,9mm core diameter. Dimension: 16,50 x 11,30mm.

Quality: 3

Sheet metal nut, 4,2. For sheet metal driving screw with 4,2mm core diameter. Dimension: 16,50 x 11,20mm.

Quality: 3

• Suitable for this article
• Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.
  0,38 €

Sheet metal nut, 4,8. For sheet metal driving screw with 4,8mm core diameter. Dimension: 16,50 x 14,50mm.

Quality: 3

• Suitable for this article
• Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes we
  0,94 €
• Screw cross lens head (4.8x22) in stainless steel. Per piece.
  0,38 €
• Screw cross lens head (4.8x32) in stainless steel. Per piece.
  0,39 €
• Screw chrome, for mounting the indicators. Suitable for Citroen DS, starting from year of const
  0,56 €

Exhaust elbow seal (fuel engines) suitable for Peugeot 403, 404, 504, 505, J5, J7, J9, Citroen C25. Or. No. 0349.03

Quality: 2

Exhaust valve. Suitable for Peugeot 404, 504, 505, J5, J7. Engine: XM7, XNA, XN1, XN2. Engine capacity: 1796cc + 1971cc. Diameter: 35,5mm. Valve stem: 8,0mm. Length: 112,2mm. Or. No. 0949,27 + 0949.55

Quality: 3

Exhaust pipe seal, suitable for Citroen HY Diesel + Peugeot J7. Engine: XDP88, XDP90, XDPX90 (1948cc + 2112cc + 2304cc). Inside diameter: 47,0mm. Outside diameter: 66,0mm. Or. No. 171007 + 171078

Quality: 3

Exhaust pipe seal. Suitable for Citroen HY Diesel (XDP88). Peugeot 504 2.3D (XD2). Peugeot J7 (XDP88, XDP4.88, XDP90, XDPX90). Inside diameter: 46mm. Outside diameter: 60mm with 2 slots! Or. No. 171019

Quality: 3

Exhaust clip 38mm (clamp clip). Thread: M8

Quality: 3

Exhaust clip 54mm (clamp clip). Thread: M8

Quality: 3

Battery Service Screwdriver (for the caps of the battery cells). Indispensable! Finally a tool that fits and not always a too narrow screwdriver that destroys the caps. Length: approx. 100mm.

Quality: 1

Battery pole switch bent (space-saving). Just release knurled head bolt to stop current circuit.It can be very easily used when you do not use your car for long time(winter)! This switch replaces battery negative pole lead!

Quality: 3

• Suitable for this article
• Battery pole grease, 50g tube.
  4,86 €

Battery pole switch. Just release knurled head bolt to stop current circuit.It can be very easily used when you do not use your car for long time(winter)! This switch replaces battery negative pole lead!

Quality: 1 360°

• Suitable for this article
• Battery pole grease, 50g tube.
  4,86 €

Battery pole protecting cap from rubber. Color: red. Length: 52mm. Width: 35mm. Short side - centric cable inlet.

Quality: 3

Battery pole protecting cap from rubber. Color: red. Length: 52mm. Width: 35mm. Long side left - cable inlet down.

Quality: 3

Battery pole protecting cap from rubber. Color: red. Length: 52mm. Width: 35mm. Long side on the right - cable inlet down.

Quality: 3

• Suitable for this article
• Battery pole negative -
  2,93 €
• Battery pole protecting cap from rubber. Color: black. Length: 52mm. Width: 35mm. Long side on
  2,88 €

Battery pole protecting cap from rubber. Color: black. Length: 52mm. Width: 35mm. Short side - centric cable inlet.

Quality: 3

Battery terminal protecting cap from rubber. Color: black. Length: 52mm. Width: 35mm. Long side left - cable inlet below.

Quality: 3

Battery pole protecting cap from rubber. Color: black. Length: 52mm. Width: 35mm. Long side on the right - cable inlet down.

Quality: 3

• Suitable for this article
• Battery pole negative -
  2,93 €
• Battery pole protecting cap from rubber. Color: red. Length: 52mm. Width: 35mm. Long side on th
  2,88 €

Battery pole grease, 50g tube.

Quality: 3

Clamp made of metal, for up to 10mm lines. (Cable harness, gasoline line, water hose etc.). The clip can be inserted on each sheet metal seam up to the maximum strength by 2mm.

Quality: 3

Gasoline filter with check valve (membrane)preventing gasoline from flowing back again, universal model. Better start after long immobilisation time. The membrane of the fuel pump does not run dry quickly. Indispensable for vintage cars. For fuel hose with 5,5 - 7,5 mm internal diameter. Diameter 42mm. Construction length totally 100mm.

Quality: 1

• Suitable for this article
• Fuel hose metal-encases. (2CV6) Inside diameter: 5,5mm, outside diameter: 10,5mm. By meters. Cu
  7,83 €

Gasoline pump Peugeot with hand lever! Completely made from metal. Suitable for Peugeot 203, 403, 404, 504, 505 GL/GR/SR, D3A, D4A, J5, J7, J9, Jeep P4, Citroen C25.

Quality: 3 360°

• Suitable for this article
• Fuel pump seal for the connection at the engine block. Suitable for Citroen 2CV, Citroen DS aft
  2,13 €

Gasoline pump Peugeot. Reproduction made of metal. Suitable for Peugeot 203, 403, 404, 504, 505 GL/GR/SR, D3A, D4A, J5, J7, J9, Jeep P4, Citroen C25. Good quality.

Quality: 3 360°

• Suitable for this article
• Fuel pump seal for the connection at the engine block. Suitable for Citroen 2CV, Citroen DS aft
  2,13 €

Fuel pump seal for the connection at the engine block. Suitable for Citroen 2CV, Citroen DS after 1968, Renault, Peugeot. This seal replaces the paper gasket and is made of "KLINGERSIL". 0,5mm thick. Klingersil is an extremely resistant material, against oils, petrol, alcohol etc.

Quality: 1

Fuel hose, only from rubber (not fabic encases). Inside diameter: 5,0mm. The hose is almost optical identical, to the early time used hoses. Customer cut, a return is not possible!

Quality: 3

• Suitable for this article
• Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,56 €

Fuel hose, only from rubber (not fabic encases). Inside diameter: 6,0mm. The hose is almost optical identical, to the early time used hoses. Customer cut, a return is not possible!

Quality: 3

• Suitable for this article
• Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,56 €

Brake pipe bending pliers! Been suitable for sheet metal, copper, stealing and aluminum lines. Bends up to 90°. Suitable for pipe Ø: 3/16 " (4,75mm), 1/4 " (6,35mm), 5/16 " (7,93mm), 3/8 (9.52mm).

Quality: 3

Blind plug - body plug conical, 8mm. For sealing or closing holes (cavity preservation). Good resistance against corrosion, weathering, ageing, ozone, oils, petrol splashes and solvents. Contains no silicone (important for possible painting work). Super easy to use, no fiddling.

Quality: 3

Clinch screw. F-flange. Thread: 3/8 x 24UNF. Wrench: 11mm. Suitable for Renault 4, R8, R10, Floride. Peugeot etc.

Quality: 3

Bosch, distributor cap (system Bosch). Suitable for Peugeot 504 (2,0L), 505 (2,0L). Peugeot J5. Citroen C25. Or. No. 5941.27. Made in France.

Quality: 3 Pdf

Brakes bleeder device! Working pressure 5-8 bar, max. vacuum 60%, capacity 1L,

Quality: 3

Brake fluid DOT4. 1 liter. Manufacturer ATE. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake fluid DOT4. 1/2 liter. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake fluid DOT4. 5,0 liter can. Manufacturer TOTAL. Suitable for all Citroen 2CV to year of construction 1981 (vehicles with drum brake in front). Citroen 11CV, HY. All Peugeot and Renault models.

Quality: 2

Brake hose copper sealing ring. Dimension: 13 x 19 x 1,5mm. Peugeot Or. No. 461001

Quality: 3

Brake hose copper sealing ring. Dimension: 15 x 20 x 1,5mm. Peugeot Or. No. 444201

Quality: 3

Drum spring draw hook from HAZET. Extremely helpfully.

Quality: 2

CO tester (exhaust tester). Digitally. Optimally for the experienced mechanician, in order to adjust the carburetor. We use it since years for our classic cars! English operating instructions are attached. For the language German, Dutch, Spanish, Italian, French can be down-load the operating instructions of our homepage.

Quality: 3 Pdf

CX, Radiator hose T-piece (made of plastic). Suitable for Citroen CX, from year of manufacture 1977. Peugeot J5 Diesel (CRD93 + CRD93S). Or. No. 95474048 + 1307.27 (old number)

Quality: 3

Distilled water, 5 liters. For radiator filling. Tap water contains harmful components for the cooling circuit. For mixing the antifreeze fluid, please take care to use distilled water . It improves the adhesion of corrosion-blocker in your cooling system.

Quality: 3

Diesel filter (cartridge) C157A (injection pump Lucas/Roto Diesel). Suitable for Peugeot 404, 504, J7. Citroen HY Diesel. CX Diesel, Visa Diesel. Height: 73mm. Or. No. 1906.08

Quality: 2

Diesel filter CS178A Lucas Montage CX TD, BX,C25,XM >94 205/309/405/605/J5 >94

Quality: 2