P 504 V6/R30, valve cover gasket on the right (made of paper, approx. 1 mm thick), for Peugeot
Renault V6, with valve cap from aluminum casting. (ZMJ). Suitable for Peugeot 504 V6, 505 V6, 604 V6, Renault R25 V6, R30, Talbot Tagora. Or. No. 0249.31
for Peugeot Sonstige-Peugeot
1059 Articles | Page 14 of 22
P 504, Bleeder screw rear brake caliper. Brake system: Lucas. Thread: 3/8 x 24 UNF. Length: 36,6mm
Suitable for Peugeot 504 and many other Peugeots.
P 504, tie rod completely (inclusive tie rod end + collar steering gear). Suitable for Peugeot 504
Cabriolet + Coupe. Also suitable for Peugeot 104, Peugeot 505. Citroen VISA. Or. No. 3812.15. The tie rod is on the left + on the right identically.
P 504/505, exhaust pipe center (for car`s with 2 silencers). Suitable for Peugeot 504 (petrol 2.0)
of year of construction 07/1972 to 12/1980. Engine: XN1 + XN2. Peugeot 504 Diesel (2,3D). Engine: XD2. Peugeot 505 (2.0, TI, STI). Or. No. 1722.15
P 504/505, rear brake shoes. Suitable for Peugeot 405 and 505. Lucas system. Diameter: 254 mm
Brake lining width: 60 mm. Or. No. 424152 and 424101.
P 504/505, front brake pads, TEVES (ATE) system, with wear indicator. Width 89,5 / height 70,0
thickness 19mm. Suitable for Peugeot 504 + 505.
Drum for Peugeot 504, 505. 254mm diameters. Height totally 70,5mm, interior height 55,5mm, interior
hole (mounting) 93mm. 4 hole rim. Or. No. 4247.17
P 504/505, spring plate above. Suitable for Peugeot 504 (sedan + Cabrio) petrols + 505 petrols. It
is attached an adapter ring, so it can use a spring-and-damper unit with 12mm + 14mm thread.
P 504/505, transmission suspension rear. Suitable for Peugeot 504, starting from year of
construction 1979. Peugeot 505. Or. No. 1843.70
P 504/505, master brake cylinder dual circuit. Brake system: Bendix. Piston diameter: 20,6mm. 3x
brake line connector M10. Suitable for Peugeot 504 BREAK, starting from year of construction 07/1981. 504 Pick UP. 505 sedan.
P 504, elbow pipe in front (2 in 1). Suitable for Peugeot 504 sedan, of year of construction
07/1972 to 12/1980. Engine: XN1 + XN2 (engine capacity 1971cc). Peugeot 504 Cabriolet 2.0, of year of construction 08/1982 to 08/1984. Engine: XN2 (engine capacity 1971cc). Peugeot 505, of year of construction 01/1982 to 06/1983. Engine: XM7P (engine capacity 1796cc). Or. No. 1701.75 + 1702.68
P 504/505, clutch complet (Diesel). Suitable for Peugeot 504 D + 505 D. Engines: XD90, starting
from year of construction 08/1981 (2.1 L). XD2, starting from year of construction 08/1981 (2.3 L). For gearboxes: BA7, BA7/5. Reproduction with centering mandrel. Diameter: 215mm. Teeth: 10. Splines outside diameter: 29 mm. Or. No. 2001.92 + 2004.88
P 504/505, clutch taking cylinder. Suitable for Peugeot 504 petrol, starting from year of
construction 11/74 (4 + 6 liners). Peugeot 505 + 604. Piston diameter: 28,57mm. Connecting thread: M10x1. Or. No. 2086.10. Made in Europe.
P 504/505, steering gear bellow (mechanical steering). Suitable for Peugeot 504, starting from year
of construction 1986. Peugeot 505. Diameter about 47 + 11mm. Or. No. 4066.26
P 504/505, engine suspension in front. Suitable for Peugeot 504, starting from year of construction
1980. Peugeot 505. Engines Diesel: XD2S, XD3T. Engines petrol: ZEJ, ZDJ, N9T. Or. No. 1807.43
P 504/505, rear left wheel brake cylinder, Bendix system. Suitable for Peugeot Berline, from year
of manufacture 04/1975. Peugeot 504 GL, GR, DR + Diesel from year of manufacture 07/1977. Brake line connection: M10x1. Piston diameter: 22 mm. Anchor plate bore: 36 mm. Overall length: 73 mm. Original no. 4402.41
P 504/505, rear right wheel brake cylinder, Bendix system. Suitable for Peugeot Berline, from year
of manufacture 04/1975. Peugeot 504 GL, GR, DR + Diesel from year of manufacture 07/1977. Brake line connection: M10x1. Piston diameter: 22 mm. Anchor plate bore: 36 mm. Overall length: 73 mm. Original no. 4402.42
P 504/505, silencer rear (1x 29,5cm + 1x 20cm), overall length 147cm. Suitable for Peugeot 504
(sedan, Cabrio, Coupe), of year of construction 1968 to 1983. Engine: 1,8L - 2,0L (petrol) + 1.9 - 2,3L (Diesel). Peugeot 505 (2,0L). Or. No. 1725.54
P 504/505, shaft seal for the differential. Dimension: 45 x 62 x 10,5mm. Suitable for Peugeot 504
sedan + Cabrio (also V6). Peugeot 505. Or. No. 3121.13
Seal under carburetor Peugeot 504, P 505, Talbot Tagora. Carburetor 32 MIMSA. Please compare
accurately the illustration!
P 504/505, front muffler. Suitable for Peugeot 504 sedan (GL + TI), of year of construction 01/1971
to 06/1983. Engine: 1796cc + 1971cc. Peugeot 504 Cabriolet 2,0. Of year of construction 10/1974 to 08/1984. Peugeot 505 (1971cc + 1995cc). Or. No. 1720.16 + 1720.57 + 1720.72 + 1721.23 + 1721.34. Overall length: 828mm. Connection diameter in front + rear: 46mm. Silencer height: 113mm. Silencer wide: 210mm.
P 504/505, water pump, with disengageable fan. Length of the shaft: 55mm. Suitable for Peugeot 504
Peugeot 505. For 1,8 + 2.0 engines. (XM). Starting from serial number: CH3061637. Or. No. 1201.31 + 1201.89 + 1202.82 + 1202.97
P 504/505, water pump. Suitable for Peugeot 504 (1,8L + 2,0L), Peugeot 505 (1,8L + 2,0L). Engine
code: XM. Rigid fan blade. Length of the shaft: 40mm. Installed starting from year of construction 8/1979. Or. No. 1202.98 + 1201.90
P 504/505, water pump seal. Suitable for Peugeot 504, Peugeot 505. For 1,8 + 2.0 engines. (XM)
Starting from serial number: CH3061637. Or. No. 1206.21. Made in Germany
P 504/505/104, Carburetor sealing set Solex 32/35 TMIMA. Suitable for Peugeot 504 GL/GR. Peugeot
505 GR/SR/GL. Peugeot 104 ZS
P 504/505/604, drive shaft collar (with sheet metal case), wheel side. Suitable for Peugeot 504
505, 604. Diameter: 82,6mm + 26,7mm. The metal casing is 110mm long. Or. No. 3293.50 + 3293.57
P 504/505/604, mounting (fixture) rear axle, on the left (rubber metal handle). Dimension: 45 x 69
x 44mm. Suitable for Peugeot 504, 505, 604. Or. No. 5152.16
P 504/505/604, mounting (fixture) rear axle, on the right (rubber metal handle). Dimension: 45 x 69
x 44mm. Suitable for Peugeot 504, 505, 604. Or. No. 5152.17
P 504/505/604, brake pads mounting set rear. Brake system: Lucas. Suitable for Peugeot 504
starting from year of construction 1981. 505, 604.
P 504/505/604, brake caliper in front. Depending upon assembly position: Behind the axle on the
right or before the axle on the left. Suitable for Peugeot 504, 505 + 604. Brake system: ATE. Or. No. 4400.48. In the exchange, plus 150 Euro Old part deposit. For brake disk thickness: 12,9mm. 1 piston. Piston diameter: 54mm.
P 504/505/604, front brake disc set. Suitable for Peugeot 504 V6 (Cabriolet + Coupe) from 1974 to
1984. Peugeot 505 + 604. The brake discs are ventilated. Diameter: 273mm. Or. No. 4246.70 + 4246.H2
P 504/505/604, ball pin (ball joint) down. Fits on the left of or on the right. Thread: M12 x 1.5
Suitable for Peugeot 504, 505, 604. Or. No. 3640.15
P 504/505/604, ball pin (ball joint) down. Fits on the left of or on the right. Thread: M12 x 1.5
Suitable for Peugeot 504, 505, 604. Or. No. 3640.25
P 504/505/604, radiator hose reduction connection. Diesel engine: XD88, XD90, XD2. Suitable for
Peugeot 504D (starting from year of construction 1970), 505D, 604D. Inside diameter: 32,0 + 38,0mm. Or. No. 1350.27
P 504/505/604, radiator hose down (connecting tube to the radiator). Diesel engine 2.3 (XD2) + 2,5
Engine capacity: 2304cc + 2498cc. Suitable for Peugeot 504 D, 505 D + TD, 604 TD. Or. No. 1350.46
P 504/505/604, clutch master cylinder. Suitable for Peugeot 504 + 505, all petrols starting from
year of construction 11/1974. Peugeot 504 + 505 all Diesel, starting from 11/1970. Peugeot 604 Diesel + V6. Piston diameter: 19,05mm. Connecting thread: M10x1. Distance fixing holes: 50mm. Or. No. 2095.15 + 2095.17 + 2094.18. Made in Europe.
P 504/505/604, liner gasket bottom (4x). Suitable for Peugeot 504 (engine XN2) + 604 + 505 (engine
XN6). Outer diameter: 99.6mm. Inner diameter: 93.2mm.
P 504/505/604, steering sleeve (power steering). Large opening. Suitable for Peugeot 504 from 1980
years of construction. Peugeot 505 + 604. Connection diameter: approx. 40mm. Or. No. 4066.17. The power steering normally has a sleeve with a large and one with a small opening.
P 504/505/604, wheel bearing rear. Dimension: 84 x 42 x 36mm. Suitable for Peugeot 504 sedan, of
year of construction 1968 to 1985. 504 Cabrio + Coupe, of year of construction 1976 to 1981. Peugeot 505 + 604. Or. No. 3326.13. Made in Spain
1059 Articles | Page 14 of 22
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
