for Renault R5-R6

R4, drive shaft. Suitable for Renault R4 + R5 (fits both left and right), from the year of

construction 1979 onwards. Approx. length: 680-710 mm (the drive shaft features a length compensation mechanism!). New part! Number of teeth on the wheel side: 23. Number of teeth on the gearbox side: 22. Please note: on the wheel side, this drive shaft has a diameter of 82 mm! Fitting can be a bit fiddly! This is why the drive shaft is only suitable for cars constructed in the years of construction 1979 and later. This is because the lower suspension joints on cars constructed up to the year of construction 1979 are positioned higher!

R4, Radiator Trophy Renault Renault R4 from 1978 onwards, Renault R5, for engines with 947cc +

1108cc, type Cleon. The radiator is mounted directly behind the radiator grille. The radiators are manufactured in small series from aluminium. Minor adjustments may be necessary. The radiator has improved heat exchange. However, the radiator is not actually necessary in Central Europe. If you often visit Africa or drive sportily in southern Europe, it is worth considering.

Anti roll bar repair set, for 12mm metal sleeve. Suitable for Renault R4, R5. Includes: 2x clip, 2x

rubber bush for clip, 2x suspension rubber outside (Metal sleeve = 51mm). Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter

R4, anti roll bar repair set, for 10mm anti roll bar. Suitable for Renault R4 + R5. Contents: 2x

clip, 2x rubber bush for clip, 2x suspending rubber outside (metal sleeve length: 51mm). Note: The rubber bush for fixture anti roll bat at the body has always about 15-16mm diameter

R4/R5, fuel sender (last version), without return. For bayonet mount. Suitable for Renault R4, from

approx. year of manufacture 1983/84. Renault R5. For vehicles that have a fuel pump with 2 hose connections. These were used in engine 845ccm (800, B1B) + 1108ccm (688 + C1E). Attention: Vehicles were produced in the same period which may or may not have a fuel return. Please check on your vehicle. Or. No. 7701349131

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide

one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide

one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide

one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to

41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.

R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for

Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)

R4/5, cylinder head gasket set completely, inclusive cylinder head gasket (original REINZ)

Suitable for Renault R4, with 747cc, 782cc + 845cc. Of year of construction 1962 to 1989. Renault R5 (845cc), of year of construction 10/1972 to 12/1984. R6 from 10/1969 to 04/1980. Manufacturer original REINZ!

R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5

800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182

R4/R16/R12, brake power controller. 4x 3/8x24UNF brake pipe connections. Suitable for Renault R4

of year of construction 1976 to 1986. Renault R16 TL, of year of construction 01/1971 to 12/1976. Renault R5, Renault R12. Or. No. 770685455. Attention, there are also vehicles with 3x 3/8 + 1x 7/16 connection. For these purposes we have a suitable adapter (84372) in our delivery programme.

R4/R5, piston + liner (4 item). Suitable for Renault R4 (R1123, R1124, R2104, R2106), of year of

construction 1969 to 1986. Renault R5L + R6. Engine: 800 B1B, 800 10 02/03/01/05. Engine capacity: 845cc. Compression: 8: 1. Piston pin: 16 x 49mm. Piston rings 2,0/2,0/3,5. Outside diameter down: 62,50mm. Outside diameter above: 69,80mm. Height totally: 126,0mm. Mounting with paper seal for the liners (no copper seal)