Alle / Alle / chrome parts

2CV old, box sill entrance protection out polished high-grade steel.

Quality: 0

Fender rear, stone guards (1 pair) at the rear side of the rear fenders. These stone guards corners take up also the taillight. Suitable for Citroen 2CV to year of construction 1963. Material: Aluminum casting poilished.

Quality: 3

2CV, fenders front + rear. Stone guards corner (6 pieces) for the front fenders (under the front turn signals) + rear on the front fender (above the mud flaps). Additionally on the front of the rear fenders. So, 1 complete set for the 2CV. Material: Polished cast aluminium

Quality: 3

2CV, Fender in front, stone guards (1 pair) rear, at the front fenders. (Above the mud flaps). Suitable for Citroen 2CV, all years of construction. Material: Aluminum casting polished.

Quality: 3

• Suitable for this article
• Fender rear, screw from high-grade steel (round head M5x16).
  0,58 €
• Nut M5, galvanized
  0,15 €

2CV, Fender in front, stone guards (1 pair) underneath the indicators, for the front side of the fender. Suitable for Citroen 2CV, all years of construction. Material: Aluminum casting polished.

Quality: 3

• Suitable for this article
• Fender rear, screw from high-grade steel (round head M5x16).
  0,58 €
• Nut M5, galvanized
  0,15 €

2CV, Soft top hood closing cap in front on the left from aluminum casting. Note: Only suitable for 2CV with roll roof buckle outside!. Bore for the connector must be adapted depending upon year of construction.

Quality: 4

• Suitable for this article
• 2CV, Soft top hood closing cap in front on the right from aluminum casting. Note: Only suitable
  21,72 €
• 2CV, Soft top hood, hood bow in front. A97199
  44,53 €

2CV, Soft top hood closing cap in front on the right from aluminum casting. Note: Only suitable for 2CV with roll roof buckle outside!. Bore for the connector must be adapted depending upon year of construction possibly.

Quality: 4

• Suitable for this article
• 2CV, Soft top hood closing cap in front on the left from aluminum casting. Note: Only suitable
  21,72 €
• 2CV, Soft top hood, hood bow in front. A97199
  44,53 €

4CV, door handle shell from steel (4 pieces). Suitable for Renault 4CV.

Quality: 3

4CV, ornamental piece for the water filler neck. Rear, underneath the back window. Suitable for Renault 4CV.

Quality: 3

4CV, trim largely (2 sections), for the handle of the luggage compartment hood. Suitable for Renault 4CV.

Quality: 3

B-post covering left, from high-grade steel. Suitable for Citroen DS Pallas. Original Citroen old stock, no reproduction! Or. No. DS854-68

Quality: 0

Turn signals - Decorative rings for the front turn signals (2 pieces), for Citroen 2CV. Also suitable for the rear lights Citroen AZU, AK400, DS Break, HY. Attention, the trim rings only fit on lights of the manufacturer "AXO". The Seima lamps are too flat. Own reproduction. Anodised aluminium.

Quality: 1

C-support. Lining outside (smooth), for B + C-support. Suitable for Citroen DS (inclusive Emblem). Or. No. DM821-104B + DM821-104C + DM854-83 + DM854-83A

Quality: 3

C-support. Lining outside (corrugated sheet, roughly serrated), for B + C-support. Suitable for Citroen DS. Or. No. DM821-104F + DM821-104G + DM854-83F + DM854-83G

Quality: 3

C-support. Lining outside, for B + C-support. Suitable for Citroen DS Pallas (inclusive Emblem). Or. No. DS821-9 II + DS 821-9 I + DS845-68 + DS854-69

Quality: 3

Chrome polish Autosol. 75ml tube.

Quality: 2

Chrome frame on the right, for the side marker light in the front fender. Suitable for Citroen DS, USA (export) version. Or. No. 1D 5412 922J. Original Citroen old stock. No reproduction!

Quality: 0

Citroen emblem (Chevron) on the dashboard. Suitable for Citroen 11CV + 15CV, up to year of construction 02/1952. Or. No. 802594. Dimension: 38 x 40mm. The emblem can also be used universal.

Quality: 3

Citroen angle (emblem), gold-colored. Reproduction made of metal. Or. No. D854-4

Quality: 3

• Suitable for this article
• Retaining tie-clip for emblems. Suitable for 2,5mm of pins. Per piece.
  0,39 €

Citroen angle chromium-plates, made of metal. Universal fitting. 2x brackets = 1x 16807!! Reproduction

Quality: 3

• Suitable for this article
• Retaining tie-clip for emblems. Suitable for 2,5mm of pins. Per piece.
  0,39 €

DS Pallas, chrome plates for the inside of the door, below the door trim. Reproduction, optically like original. Set of 4 pieces (2x front + 2x rear). These plates were originally only installed in the DS Pallas version. Or. No. DS983-77, DS 983-77A, DS983-78, DS983-78A.

Quality: 3

Emblem on the radiator grill. Suitable for Citroen 11CV Material: polished aluminum casting. Or. No. 329525

Quality: 3

Emblem on the radiator grill. Suitable for Citroen 11CV BN + 15CV BN. Material: polished aluminum casting. Or. No. 329621

Quality: 3

Retaining tie-clip for emblems. Suitable for 3mm pins. Per piece!

Quality: 3

License plate handle made of metal, anodizes. Suitable for all license plates, who are 520mm wide! Made in Germany

Quality: 1

License plate handle from chromium-plated synthetic. Suitable for all license plates, who are 520mm wide!

Quality: 3

License plate handle rear, made of metal, anodizes. For license plate 205x343mm. Suitable for R4, Dauphine, Käfer etc. Outer dimension: 365 x 255mm. Made in Germany

Quality: 1

Hood handle wide. Suitable for Citroen DS, starting from year of construction 1967. Very good reproduction. With front emblem!

Quality: 3

Bonnet handle emblem. Suitable for Citroen DS. Reproduction, how original! Or. Nr.852-2E

Quality: 3

Bonnet handle for Citroen DS. The handle is from polished aluminum casting. The bonnet handle can be mounted also onto a Citroen 2CV.

Quality: 3

Hood handle narrowly. Suitable for Citroen DS, to year of construction 1967. Very good reproduction. With front emblem!

Quality: 3

Rear light spacer base, (2 pieces, left + right), chrome-plated! Would you like something a little classier? A very easy way to add more glamour to your 2CV! The existing spcaer base is replaced by the chrome-plated spacer! Assembly: Unscrew the rear light from the plastic base. (3x M5 nut from the boot - it is not enough just to remove the rear light glass).

Quality: 3 Video

• Suitable for this article
• Tail lamp at the rear left. Suitable for Citroen 2CV, to year of construction 1990. Very signif
  32,63 €
• Tail lamp at the rear right. Suitable for Citroen 2CV, to year of construction 1990. Very signi
  32,63 €

Shades for headlamps (1 Pair), for Citroen 2CV. Material: Aluminum anodizes. We let the shades produce in Germany!

Quality: 1

Sill guard (tread plate) inside left, on the sill (by the parking brake). Suitable for Citroen DS Pallas.

Quality: 3

• Suitable for this article
• Sill guard fastening clips (2 pieces). For the trim panel inside left, on the sill (at the park
  17,76 €

Sill guard fastening clips (2 pieces). For the trim panel inside left, on the sill (at the parking brake). Suitable for Citroen DS Pallas.

Quality: 3

Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS BREAK + DS Cabrio. Reproduction from brushed high-grade steel.

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €

Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS BREAK + DS Cabrio. Reproduction from polished high-grade steel.

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €

Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS BREAK. Reproduction from aluminum (grooved, like original).

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €

Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS sedan. Reproduction from aluminum (grooved, like original). Or. No. DS85362D

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €

Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS Pallas sedan. Reproduction from brushed high-grade steel. Or. No. DS85362B. Made in Germany.

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €

Box sill lining (4 pieces, for the whole vehicle) outside. Suitable for Citroen DS Pallas sedan. Reproduction from polished high-grade steel. Or. No. DS85362C. Made in Germany.

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €
• Chrome polish Autosol. 75ml tube.
  6,84 €

Box sill lining set inside - above, from high-grade steel. Suitable for Citroen DS Pallas. Set 4 fittings, optically like original!

Quality: 3

SM, box sill lining (4 pieces for the whole vehicle) outside. Suitable for Citroen SM. Reproduction from aluminium.

Quality: 3

SM, box sill lining (4 pieces for the whole vehicle) outside. Suitable for Citroen SM. Reproduction from stainless steel. Or. No. 6S5408624S

Quality: 3