Alle / Alle / wheel brake cylinder rear

4CV/Dauphine/Floride, wheel brake cylinder at the rear left. Suitable for Renault 4CV, starting from year of construction 02/1956. Renault Dauphine + Floride. Piston diameter: 20.6 mm. Mounting board bore: 32 mm. Brake line connector = 3/8x24UNF. Length over everything: 60 mm. Made in France

Quality: 3 360°

4CV/Dauphine/Floride, wheel brake cylinder rear on the right. Suitable for Renault 4CV, Dauphine + Floride. Piston diameter: 20.6 mm. Mounting board bore: 32 mm. Brake line connector: 3/8x24UNF. Length over everything: 60 mm. Made in France

Quality: 3 360°

Brake shoe set rear, with wheel brake cylinders (piston 15,9mm). Suitable for Citroen 2CV4 + 2CV6, of year of construction 07/1981 to 1990. Dyane 6, AMI 8, Mehari. Brake system: LHM. Original Valeo, no reproduction. Brake line connector: 8,0mm. For drum diameters: 180mm. Lining-wide: 34mm.

Quality: 2

• Suitable for this article
• Brake centering tool, for the rear drum. Suitable for Citroen 2CV, Dyane + Mehari.
  44,53 €
• Copper paste 100gr.
  9,82 €

Brake shoe set rear, with wheel brake cylinders (piston 17,5mm). Suitable for Citroen 2CV4 + 2CV6, of year of construction 03/1970 to 06/1981. Dyane 4, AMI 6. Mehari. Brake system: DOT. Original Valeo, no reproduction. Brake line connector: 8,0mm. For drum diameters: 180mm. Lining-wide: 34mm.

Quality: 2

• Suitable for this article
• Brake centering tool, for the rear drum. Suitable for Citroen 2CV, Dyane + Mehari.
  44,53 €
• Copper paste 100gr.
  9,82 €

Brake system repair set rear, for Citroen 2CV6, complete to renew th rear brake system, consisting in brand brake pads, 2X brand LHM wheel brake cylinder, 1X assembly kit for brake pads, 2X original nut, 2X grease cap.

Quality: 3

• Suitable for this article
• Brake centering tool, for the rear drum. Suitable for Citroen 2CV, Dyane + Mehari.
  44,53 €

Brake power controller, spring set. Suitable for Citroen HY, starting from year of construction 9/1966. Consisting of 3 springs. Or. No. HY456-291A, HY456-96, HY456-95.

Quality: 3

Brake power controller (new part). Suitable for Citroen HY. Or. No. HY456-37.

Quality: 3

Brake power controller gasket kit. Suitable for Citroen HY.

Quality: 3

Brake hose adapter from 7/16x24 UNF on 3/8x24UNF. Made in France

Quality: 3 Pdf

Brake caliper rear, completely. New part! Suitable for Citroen GS 1220 + 1300. Or. No. GX2512801B. No old part return necessarily!

Quality: 3

Brake cylinder paste of FÖRCH, 5g. Full-synthetic brake cylinder paste for hydraulic brake systems. Durability of brake cylinders is extended. Protects against corrosion. Compatibly with the brake fluids DOT 3, DOT 4 and DOT 5.1. Keeps lubricated collars. Assembly aids for O-rings, lip seals, collars and others. Sealing components from elastic materials.

Quality: 1

Dauphine, wheel brake cylinder at the rear left. Brake system: Bendix. Suitable for Renault Dauphine, of year of construction 1963 to 1967. Piston diameter: 19,05mm. Brake line connector: 3/8 x 24. Mounting board bore: 32mm. Length over everything: 61mm. Made in Spain.

Quality: 2 360°

• Suitable for this article
• 4CV, brake hose rear. Suitable for Renault 4CV, of year of construction 4/1953 to 2/1956. Lengt
  24,69 €

Dauphine, wheel brake cylinder at the rear right. Brake system: Bendix. Suitable for Renault Dauphine, of year of construction 1963 to 1967. Piston diameter: 19,05mm. Brake line connector: 3/8 x 24. Mounting board bore: 32mm. Length over everything: 61mm. Made in Spain.

Quality: 2 360°

• Suitable for this article
• 4CV, brake hose rear. Suitable for Renault 4CV, of year of construction 4/1953 to 2/1956. Lengt
  24,69 €

Sealing sleeve wheel brake cylinder. For 1 inch (25,4mm) piston. Or. No. 373005.

Quality: 3

Sealing set wheel brake cylinder rear (1.1/8 inch = 28,5mm). Suitable for Citroen HY, starting from year of construction 1969.

Quality: 3

Sealing set wheel brake cylinder rear (7/8 inch = 22,2mm). Suitable for Citroen HY, of year of construction 1963 to 1968. Renault Estafette, starting from year of construction 1967. Renault R16.

Quality: 3

Vent screw M10x1. Suitable for Citroen 2CV to about year of construction 1975. (Vehicles with brake hoses)

Quality: 3

• Suitable for this article
• Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal
  0,43 €

bleeder screw M7x1. Overall length: 28mm. Suitable for Renault R4. Peugeot 204, 304, 404, 504, 505

Quality: 3

• Suitable for this article
• Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal
  0,43 €

Bleeder screw M7x1. Original reproduction! Suitable for Citroen DS, SM, CX, 2CV, etc.. (for DS only for the wheel brake cylinders, not for the brake pliers)

Quality: 3

Vent screw M7x1. Universal suitable for many Citroen, Peugeot, Renault. Length: 22mm. Particularly suitable for the wheel brake cylinders, for Citroen 2CV with a dual circuit brake system.

Quality: 3

• Suitable for this article
• Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal
  0,43 €

Estafette, wheel brake cylinder rear (suitable on the left + on the right). Piston diameter: 15,87mm. Suitable for Renault Estafette, of year of construction 1959 to 05/1964. Length over everything: 64mm. Brake line connector: 3/8 x 24 UNF. Per piece! Made in France

Quality: 3 360°

Estafette, wheel brake cylinder rear (suitable on the left + on the right). Piston diameter: 19,05mm. Suitable for Renault Estafette, of year of construction 05/1964 to 12/1967. Length over everything: 64mm. Brake line connector: 3/8 x 24 UNF. Per piece! Made in France

Quality: 3 360°

Estafette, wheel brake cylinder rear (suitable on the left + on the right). Piston diameter: 28,57mm. Suitable for Renault Estafette, of year of construction 08/1969 to 12/1981. Brake line connector: M9 x 1,25.

Quality: 3 360°

Estafette, wheel brake cylinder at the rear left. Piston diameter: 22,22mm. Suitable for Renault Estafette, of year of construction 05/1964 to 10/1967. Length over everything: 68mm. Mounting board bore: 35,8mm. Brake line connector: 3/8x24 UNF. Made in France

Quality: 3 360°

Estafette, wheel brake cylinder at the rear right. Piston diameter: 22,22mm. Suitable for Renault Estafette, of year of construction 05/1964 to 10/1967. Length over everything: 68mm. Mounting board bore: 35,8mm. Brake line connector: 3/8x24 UNF. Made in France

Quality: 3 360°

Tap UNF 3/8 x 24 (single-cut tap). The thread is often found on brake parts such as wheel brake cylinders, master brake cylinders, brake hoses.

Quality: 3

Hollow bolt, for the connection rear wheel brake cylinders. Suitable for Citroen 11CV + 15CV. Dimension: 11.11 x 23mm. Or. Nr.438356

Quality: 3

P 104, wheel brake cylinders rear on the left, Peugeot 104. Vehicles with 1 circle brake system starting from 08/1975, vehicles with 2 circle brake system from 1976 to 09/1977. Piston diameter 23,81mm. Brake system Bendix. Brake line connector: M10x1. Or. No. 4402.45. Made in Europe.

Quality: 3

P 104, wheel brake cylinders rear on the right, Peugeot 104. Vehicles with 1 circle brake system starting from 08/1975, vehicles with 2 circle brake system from 1976 to 09/1977. Piston diameter 23,81mm. Brake system Bendix. Brake line connector: M10x1. Or. No. 4402.46. Made in Europe.

Quality: 3 360°

wheel brake cylinder P104, Visa, LNA, Samba System Bendix, piston 20,6mm

Quality: 3 360°

P 104/VISA/SAMBA, wheel brake cylinder. Brake system: Bendix. Piston diameter: 22,22mm. Mounting board bore: 32mm. Brake line connector: M10x1. Length over everything: 59mm. Suitable for Peugeot 104. Citroen VISA, LNA. Talbot Samba

Quality: 3 360°

P 202/203/403/404, wheel brake cylinder rear. Piston diameter: 25,4mm (1 inch). Suitable for Peugeot 202, 202, 403, 404. Simca Aronde + Renault Fregate. Brake line connector: 7/16x20 UNF (funnel port = F flange). Mounting board bore: 36mm. Length over everything: 67mm. Or. No. 4402.08 + 4402.09. Made in Spain.

Quality: 2 360°

P 203/403/404, wheel brake cylinder rear. Piston diameter: 28,57mm. Brake line connector: 7/16 x 20 UNF. Or. No. 4402.10. Bendix No. 621019. Mounting board bore = 36 mm. Length over everything = 72 mm. Suitable for Peugeot 403 at the rear left, to 2757587 + 2819484. Peugeot 403 rear on the right, starting from 2757588, 2819485 (with that 403 the mounting of the brake line was changed). Peugeot 404 rear on the right.

Quality: 2 360°

P 203/403/404, wheel brake cylinder rear. Piston diameter: 28,57mm. Brake line connector: 7/16 x 24 UNF. Or. No. 4402.11. Bendix No. 621019. Mounting board bore = 36 mm. Length over everything = 72 mm. Suitable for Peugeot 403 at the rear left, starting from 2757588, 2819485. Peugeot 403 rear on the right, starting from 2757587, 2819484 (with that 403 the mounting of the brake line was changed). Peugeot 404 at the rear left.

Quality: 2 360°

P 204/304/404, wheel brake cylinder rear (on the left + on the right are identically). Suitable for Peugeot 204, 304, 404. For Thermostable brake (brake booster). Simca 1000, starting from year of construction 1967. System Bendix. Piston diameter: 19,0mm. Or. No. 4402.21. Mounting board bore: 36 mm. Brake pipe connection: 3/8 x 24 UNF. Length over everything: 68 mm. Made in Spain.

Quality: 2 360°

wheel brake cylinder rear, Peugeot 204, 304, 404 Thermostable system Bendix, piston 19mm, fits left + right / original equipment 440221 till identification number: 3298000. Made in Europe.

Quality: 3 360°

Wheel brake cylinder, rear, for Peugeot 304,404 Cabrio and Coupe, suitable for left and right side, piston: 15/16 inch (23,81 mm) Bendix Nr. 621672 Peugeot Nr. 440237. Made in Europe.

Quality: 3 360°

P 204/304/404/Simca, wheel brake cylinder at the rear left. Suitable for Peugeot 204, 304, 404. Simca 1300, 1301. Piston diameter: 17,46mmmm (11/16 customs). Brake pipe connection: 3/8 x 24UNF. Or. No. 4402.19. Made in France

Quality: 3

P 204/304/404/Simca, wheel brake cylinder at the rear right. Suitable for Peugeot 204, 304, 404. Simca 1300, 1301. Piston diameter: 17,46mmmm (11/16 customs). Brake pipe connection: 3/8 x 24UNF. Or. No. 4402.20. Made in France

Quality: 3 360°

P 204/304/504/ repair set of wheel brake cylinders rear, system Girling, 7/8 piston 22,225mm.

Quality: 3

wheel brake cylinder repair set 204-404 rear, 15/16 inch piston, System Bendix

Quality: 4

wheel brake cylinder repair set 204-404 rear, 19mm piston 404 from model changing Thermostable 1965>

Quality: 4

P 205, wheel brake cylinders at the rear left, Peugeot 205 starting from 1983. 19,05mm piston, brake line connector M12x1. Brake system Girling. Or. No. 440273.

Quality: 3

P 205, wheel brake cylinders at the rear left, Peugeot 205 without brake booster. Piston diameter 20,64mm. Brake system Bendix, brake line connector M12x1. Or.Nr.440267. Made in Europe.

Quality: 3

P 205, wheel brake cylinders rear Peugeot 205. 19,05mm piston, brake line connector M10x1. Brake system Girling. Or. No. 440275. On the left + on the right fitting, per piece!

Quality: 3

P 205, wheel brake cylinders rear on the right, Peugeot 205 starting from 1983. 19,05mm piston, brake line connector M12x1. Brake system Girling. Or. No. 440274.

Quality: 3

P 205, wheel brake cylinders rear on the right, Peugeot 205 with brake booster. Piston diameter 19,05mm. Brake system Bendix, brake line connector M12x1. Or.Nr.440266. Made in Europe.

Quality: 3

Wheel brake cylinder rear left, for Peugeot 403 and 404, piston:15/16 inch,(23,81mm). Connector 3/8 x 24UNF. Or.Nr. 440226. Made in Europe.

Quality: 3 360°

Wheel brake cylinder rear right. for Peugeot 403 and 404, piston:15/16 inch,(23,81mm). Connector 3/8 x 24UNF. Or.Nr. 440227. Made in Europe.

Quality: 3 360°

wheel brake cylinder repair set 403+404 rear, 11/16 inch piston from model changing Thermostable 1965>

Quality: 4