Alle / Alle / suspension, spring struts, suspension cylinder

4CV/Dauphine/Floride, bonded-rubber bushing for the wishbone. Suitable for Renault 4CV, Dauphine, Floride. Dimension: circa 16 x 36 x 38 x 35mm. Per piece. Or. No. 8535734

Quality: 3 360°

Vehicle height corrector repair set. Hydraulic system LHM. Suitable for Citroen DS + HY with hydraulic rear axle. Or. No. DS43502DR

Quality: 3

Height corrector for the vehicle height, sealing bellows for the actuation rod. Suitable for Citroen DS. Or. No. D435-149

Quality: 3

Height corrector, guard ring made of metal for the rubber diaphragm. Suitable for Citroen DS + CX.

Quality: 3

Vehicle height corrector, in the exchange. Hydraulic system LHM (green liquid). Suitable for Citroen DS + SM. Citroen HY with hydraulic rear axle. Plus 100 Euro Old part deposit.

Quality: 3 360°

• Suitable for this article
• Screw M7x16 galvanized
  0,48 €
• Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic fluid), 4,5mm line (c
  1,24 €

Vehicle height corrector, in the exchange. Hydraulic system LHS (red liquid). Suitable for Citroen DS. Plus 100 euros Old part deposit. Or. No. DS43502D

Quality: 3 360°

Spring rear, (small diameter, short spring) for the suspension pot. Suitable for Citroen 2CV, starting from year of construction 11/1971. Or.Nr.: AY4311

Quality: 4

• Suitable for this article
• Suspension pot hinged tie bar long. (632mm, for the rear axle). Suitable for 2CV starting from
  25,68 €
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €
• Rubber stop with metal plate, at the suspension pot (for small diameter). Suitable for Citroen
  9,82 €
• Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suit
  6,50 €
• Spring hinged tie bar adjustment (from high-grade steel) with eye. New version (Installed start
  18,74 €
• Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV. Consisting of: 2x triangl
  42,69 €

Spring in front, (small diameter, long spring) for the suspension pot. Suitable for Citroen 2CV, starting from year of construction 11/1971.

Quality: 4

• Suitable for this article
• Suspension pot hinged tie bar short. (593mm, for the front axle). Suitable for 2CV starting fro
  25,68 €
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €
• Rubber stop with metal plate, at the suspension pot (for small diameter). Suitable for Citroen
  9,82 €
• Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suit
  6,50 €
• Spring hinged tie bar adjustment (from high-grade steel) with eye. New version (Installed start
  18,74 €
• Triangle pin set (4 fittings), top quality. Suitable for Citroen 2CV. Consisting of: 2x triangl
  42,69 €

Ball joint socket (ball cup rear axle) collar, suitable for Citroen DS + Citroen SM. HY with hydraulic rear axle. Or. No. D43481 + 3D5412331K

Quality: 3

• Suitable for this article
• Ball joint socket (ball cup), rear. Suitable for Citroen DS + Citroen SM. HY with hydraulic rea
  21,72 €

Ball joint socket (ball cup) retaining clamp. Suitable for Citroen DS + Citroen SM. HY with hydraulic rear axle. Diameter hook: 3mm. Or. No. D434-80

Quality: 3

Ball joint socket (ball cup) collar, protection ring (fixture ring from rubber). Suitable for Citroen DS. Or. No. D43463

Quality: 3

Ball joint socket (ball cup) repair set. Suitable for Citroen DS, starting from year of construction 1965. HY with hydraulic rear axle. Consisting of: 1x ball, 1x sealing sleeve, 1x retaining clip.

Quality: 4

• Suitable for this article
• Ball joint socket (ball cup), rear. Suitable for Citroen DS + Citroen SM. HY with hydraulic rea
  21,72 €

Ball joint socket ball, rear. Suitable for Citroen DS, starting from year of construction 1965 + Citroen SM. HY with hydraulic rear axle. Diameter: 15,87mm. Or. No. ZD9410800U

Quality: 3

Ball joint socket (ball cup), rear. Suitable for Citroen DS + Citroen SM. HY with hydraulic rear axle. Or. No. 5412334T

Quality: 3

• Suitable for this article
• Ball joint socket (ball cup rear axle) collar, suitable for Citroen DS + Citroen SM. HY with hy
  6,59 €
• Ball joint socket ball, rear. Suitable for Citroen DS, starting from year of construction 1965
  2,38 €
• Ball joint socket (ball cup) retaining clamp. Suitable for Citroen DS + Citroen SM. HY with hyd
  1,96 €

Ball joint socket (ball cup), front. Suitable for Citroen DS

Quality: 3

Suspension pot big (130mm), new part. Suitable for Citroen AK400, AMI8. Optically like original.

Quality: 3

Suspension pot, new part, with high-grade steel covering. Suitable for Citroen 2CV. Without mounting material, small diameter. Old part return not necessarily!

Quality: 1

• Suitable for this article
• Threadet pipe for the suspension pot. (Securement at the chassis). The Threadet pipes are suppl
  17,84 €
• Nut, suitable for threadet pipe (suspension pot securement), for Citroen 2CV. Only suitable fo
  4,99 €
• Rubber stop with metal plate, at the suspension pot (for small diameter). Suitable for Citroen
  9,82 €
• Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suit
  6,50 €
• Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality. Suitable for Cit
  114,53 €

Suspension pot locking cap, for large suspension pot. Suitable for Citroen AK, ACDY, Ami 6+8. per piece. Reproduction.

Quality: 4

Suspension pot locking cap, for small suspension pot. Suitable for Citroen 2CV, Dyane. The lids are inclusive brass bush and rear sealing ring. Per piece. Or. No. AZ434-96. Made by "Franzose / CiPeRe".

Quality: 3

• Suitable for this article
• Threadet pipe for the suspension pot. (Securement at the chassis). The Threadet pipes are suppl
  17,84 €
• Nut, suitable for threadet pipe (suspension pot securement), for Citroen 2CV. Only suitable fo
  4,99 €
• Suspension pot hinged tie bar long. (632mm, for the rear axle). Suitable for 2CV starting from
  25,68 €
• Suspension pot hinged tie bar short. (593mm, for the front axle). Suitable for 2CV starting fro
  25,68 €
• Suspension pot casing of small diameters, produced made of metal. 113-115mm. Suitable for Citro
  18,74 €
• Rubber stop with metal plate, at the suspension pot (for small diameter). Suitable for Citroen
  9,82 €
• Collar suspension pot - hinged tie bar. (Seal of the hinged tie bar to the Threadet pipe). Suit
  6,50 €
• Triangle pin + spring hinged tie bar adjustment set (4 fittings), top quality. Suitable for Cit
  114,53 €

Suspension pot casing of large diameters, produced from high-grade steel. 130-135mm. Suitable for Citroen AK400, ACDY, AMI6+8. the suspension pot casing is supplied without locking caps.

Quality: 4

Suspension pot casing of large diameters, produced made of metal. 130-135mm. Suitable for Citroen AK400, ACDY, AMI6+8. The suspension pot casing is supplied without locking caps.

Quality: 4

• Suitable for this article
• Suspension pot locking cap, for large suspension pot. Suitable for Citroen AK, ACDY, Ami 6+8. p
  38,58 €

Suspension pot casing of small diameters, produced made of metal. 113-115mm. Suitable for Citroen 2CV. The suspension pot casing is supplied without locking caps.

Quality: 4

• Suitable for this article
• Suspension pot locking cap, for small suspension pot. Suitable for Citroen 2CV, Dyane. The lids
  19,73 €

Suspension pot hinged tie bar 610 - 618,0mm. Suitable for Citroen AK400 (Van). Or.Nr.: AM.434.91

Quality: 4

Suspension pot hinged tie bar short. (593mm, for the front axle). Suitable for 2CV starting from year of construction 06/1972. Very good reproduction from the European Union.

Quality: 3

• Suitable for this article
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €

Suspension pot hinged tie bar short. (600mm, for the front axle). Suitable for 2CV starting from year of construction 06/1972. Reproduction

Quality: 4

• Suitable for this article
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €

Suspension pot hinged tie bar long. (632mm, for the rear axle). Suitable for 2CV starting from year of construction 06/1972. Very good reproduction from the European Union.

Quality: 3

• Suitable for this article
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €

Suspension pot hinged tie bar long. (640mm, for the rear axle). Suitable for 2CV starting from year of construction 06/1972. Reproduction

Quality: 4

• Suitable for this article
• Friction disk (plate) for the small suspension pot. 110mm diameter. Suitable for Citroen 2CV.
  21,72 €

Spring hinged tie bar adjustment (from high-grade steel) with eye. New version (Installed starting from year of construction 11/1971 to 1990). These adjustment eyes are produced completely from high-grade steel (type 304). Additionally they have a small bore, so that they can be lubricated. Top quality and best processing. Produced in Europe! Suitable for all Citroen 2CV, Dyane, AMI. (Securement eye for the triangle pin at the radius arm). Per piece.

Quality: 1 360°

• Suitable for this article
• Fixing clip for the triangle pin. (fitting for small and large triangle pins). For Citroen 2CV,
  0,79 €
• Triangle pin small, top quality. Suitable for Citroen 2CV in front. (Securement the suspension
  10,82 €
• Triangle pin largely, top quality. Suitable for Citroen 2CV in the rear. (Securement the suspen
  10,82 €

Spring hinged tie bar adjustment with eye, suitable for Citroen AK, ACDY, AMI (12-15mm longer, than the adjustment of the Citroen 2CV). (Securement eye for the triangle pin at the radius arm). Per piece.

Quality: 3

Hinged tie bar adjustment with eye. Old version (Installed to year of construction 11/1971, fits however on all 2CV to year of construction 1990). Suitable for all Citroen 2CV, Dyane, AMI. (Securement eye for the triangle pin at the radius arm). Per piece.

Quality: 4

• Suitable for this article
• Triangle pin small, galvanizes. Suitable for Citroen 2CV front. (Securement of the suspension p
  4,42 €

Suspension cylinder - ball joint socket repair set big, for the rear axle. Suitable for Citroen DS. Consisting of: Ball joint socket ball cup, ball for ball joint socket, clip ball joint socket, collar ball joint socket, rubber ring suspension cylinder collar, retaining strap suspension cylinder collar, piston rod suspension cylinder, Suspension cylinder collar, sealing set suspension cylinder, retaining plate suspension cylinder.

Quality: 3

Suspension cylinder - ball joint socket repair set small, for the rear axle. Suitable for Citroen DS. Consisting of: Ball joint socket ball cup, ball for ball joint socket, clip ball joint socket, collar ball joint socket, rubber ring suspension cylinder collar, retaining strap suspension cylinder collar, piston rod suspension cylinder.

Quality: 3

• Suitable for this article
• Torque wrench largely, 40-200Nm. 1/2 " mounting. Professional quality
  167,59 €

Suspension cylinder sealing set LHM (35mm). Suitable for Citroen DS sedan + Citroen SM. Or. No. DX434-94

Quality: 3

Suspension cylinder sealing set LHM (40mm). Suitable for Citroen DS BREAK. Or. No. DVF 434-94

Quality: 3

Suspension cylinder sealing set LHS (35mm). Suitable for Citroen DS sedan, to year of construction 1967. Or. No. D434-94A

Quality: 1

Suspension cylinder sealing ring, for the plug screw. Suitable for Citroen DS BREAK, starting from year of construction 10/1972. Or. No. 3D5410538W.

Quality: 3

Suspension cylinder sealing ring, for the plug screw. Suitable for Citroen DS BREAK, to year of construction 10/1972. Or. No. DVF434-120.

Quality: 3

Suspension cylinder sealing ring, for the plug screw. Suitable for Citroen DS, starting from year of construction 05/1972. Citroen SM. Or. No. 3D5410536

Quality: 3

Suspension cylinder sealing ring, for the plug screw. Suitable for Citroen DS, of year of construction 1955 to 05/1972. Citroen SM. Or. No. DX434-111

Quality: 0

Suspension cylinder retaining plate rear. Suitable for Citroen DS. Dimension: 32 x 17,5mm. Or. No. D43467 + 3D5412335D. Made in Germany.

Quality: 3

Suspension cylinder rear (new). Hydraulic system LHM. Suitable for Citroen DS BREAK, starting from year of construction 1966. Or. No. DVN434-02D.

Quality: 3

• Suitable for this article
• Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic fluid), 4,5mm line (c
  1,24 €

Suspension cylinder rear (new part). Hydraulic system LHM. 59mm. Suitable for Citroen DS sedan, starting from year of construction 1966. Or. No. 2D 5410 163W. An old part return is not necessary.

Quality: 3

• Suitable for this article
• Sphere (suspension ball) sealing ring, for hydraulic system LHM. Suitable for Citroen DS, BX, X
  1,10 €
• Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic fluid), 4,5mm line (c
  1,24 €

Suspension cylinder rear (new part). Hydraulic system LHS. 59mm. Suitable for Citroen DS sedan, of year of construction 1955 to 1966. Or. No. DS434-02A. An old part return is not necessary.

Quality: 3

Suspension cylinder rear, in the exchange. Hydraulic system LHM. 59mm. Suitable for Citroen DS sedan, starting from year of construction 1966. Or. No. DXN43302A. Plus 100 Euro Old part deposit.

Quality: 3 360°

• Suitable for this article
• Hydraulic line + brake hose seal (socket) green. For LHM (green hydraulic fluid), 4,5mm line (c
  1,24 €

Suspension cylinder rear, in the exchange. Hydraulic system LHS. 59mm. Suitable for Citroen DS sedan, to year of construction 1965. Or. No. DX434-02A. Plus 100 Euro Old part deposit.

Quality: 3

• Suitable for this article
• Hydraulic line seal 4,5mm LHS (red). Suitable for Citroen DS, with LHS hydraulic system.
  0,71 €

Suspension cylinder piston rod (1 version). Suitable for Citroen DS sedan.

Quality: 3

Suspension cylinder piston rod, for the rear axle. Suitable for Citroen DS sedan (not for BREAK) + Citroen SM. Length: 255mm. Or. No.: 3D5410068M

Quality: 3

Suspension cylinder piston rod, for the front axle. Suitable for Citroen DS sedan.

Quality: 3

Suspension cylinder piston rod. Suitable for Citroen DS BREAK + HY. Or. No. DF4343. Length: 225mm.

Quality: 3

Suspension cylinder collar rear (cafetiere). Reproduction. Suitable for Citroen DS. Or. No. 5412335D

Quality: 3

• Suitable for this article
• Ligarex, specially pliers for clip strap (bellow straps). This securement was used at many Fren
  79,23 €
• Ligarex strap, locks for the clip strap (100 fittings).
  9,87 €
• Ligarex strap, bellows clip strap of 25 meters, 5mm wide one.
  18,79 €
• Suspension cylinder collar, protection ring (fixture ring from rubber). Suitable for Citroen DS
  2,90 €