Alle / XM / screws + nuts

Fender rear, screw from high-grade steel (round head M5x16).

Quality: 1

Soft top hood, push-button completely, for riveting. Universal fitting.

Quality: 2

Sheet metal nut, 2,9. For sheet metal driving screw with 2,9mm core diameter. Dimension: 12.0 x 11,0mm.

Quality: 3

Sheet metal nut, 3,5. For sheet metal driving screw with 3,5mm core diameter. Dimension: 16,50 x 11,0mm.

Quality: 3

• Suitable for this article
• Soft top hood, sheet metal driving screw from high-grade steel. For the push-button lower part
  0,42 €
• Sheet metal driving screw with large head, black galvanizes. Measurements: 3,5 x 16mm.
  0,45 €

Sheet metal nut, 3,9. For sheet metal driving screw with 3,9mm core diameter. Dimension: 16,50 x 11,30mm.

Quality: 3

Sheet metal nut, 4,2. For sheet metal driving screw with 4,2mm core diameter. Dimension: 16,50 x 11,20mm.

Quality: 3

• Suitable for this article
• Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.
  0,38 €

Sheet metal nut, 4,8. For sheet metal driving screw with 4,8mm core diameter. Dimension: 16,50 x 14,50mm.

Quality: 3

• Suitable for this article
• Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes we
  0,94 €
• Screw cross lens head (4.8x22) in stainless steel. Per piece.
  0,38 €
• Screw cross lens head (4.8x32) in stainless steel. Per piece.
  0,39 €
• Screw chrome, for mounting the indicators. Suitable for Citroen DS, starting from year of const
  0,56 €

Clamp made of metal, for up to 10mm lines. (Cable harness, gasoline line, water hose etc.). The clip can be inserted on each sheet metal seam up to the maximum strength by 2mm.

Quality: 3

Sheet metal driving screw with large head, black galvanizes. Measurements: 3,5 x 16mm.

Quality: 3

Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.

Quality: 3

Screw gauge metric + Whitworth. Angle of pressure 60° with 24 upward gradients 0,25-6mm. Angle of pressure 55° with upward gradients 4-62 gear on 1 ".

Quality: 3

Rubber silent block M10. Diameter: 40mm. Overall height: 28mm. Suitable for Renault R16 and many different.

Quality: 3

• Suitable for this article
• Nut M10, galvanized
  0,38 €

Silent block M8. Diameter: 40mm. Overall height: about 28mm. Thread: M8

Quality: 3 360°

• Suitable for this article
• M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).
  0,75 €

Roll Pin Assortment, 450 pcs. Diameter from 2 > 10mm, lenght 5>50mm.

Quality: 3

Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x 120 mm, 25 cable ties 3.6 x 200 mm

Quality: 3

Castle nut, M14X1,5. Low version

Quality: 3

Copper sealing ring, diameter inside 14,3mm. (14,3x19x1,5)

Quality: 3

Copper seal type A, (full copper). 16x22x1,5mm.

Quality: 3

LOCTITE 243, liquid screw protection, middle sttrong, indispensable for all car work

Quality: 2

spring washer M10, galvanized

Quality: 3

Nut M10, galvanized

Quality: 3

Nut M10x1. Flat design. For fastening brake hoses.

Quality: 3

Srew M10x70

Quality: 3

Spring washer M12

Quality: 1

Washer Stainless steel M12

Quality: 3

Nut M12x1,5. Flat design. For fastening brake hoses.

Quality: 3

Nut M3 galvanized (chrome trim ventilation shutter)

Quality: 3

Nut M4 galvanized

Quality: 3

Screrw M4x10 / machine screw

Quality: 3

screw M4x12, galvanized (machine screw)

Quality: 3

Nut M5, galvanized

Quality: 3

Washer corrugated M5x12 (French name: Striees). Content: 60 units. These grooved washers were original Installed at French vehicles!

Quality: 2

Washer corrugated M5x16 (French name: Striees). Content: 60 units. These grooved washers were original Installed at French vehicles!

Quality: 2

Washer set original Citroen "Strie". Contents: M5x12, M5x16, M6x14, M6x18, M7x14, M7x18, M8x18, M8x22. Range with 480 units, for all Citroen, Peugeot and Renault.

Quality: 1

M5x10, screw galvanizes.

Quality: 3

M5x16/screw from high-grade steel (1 piece)

Quality: 1

Screw M5x16, galvanized

Quality: 3

M5x20, screw galvanizes.

Quality: 3

M5x20, pitch 0,75! Screw yellow chromated. Note: This screw has a 0.75 pitch, as it was originally installed from Citroen, at the beginning of the seventies (S.i.m). Today's screws have 0,80 pitch! (ISO)

Quality: 3

spring washer M6 galvanized

Quality: 3

Nut M6, galvanized

Quality: 3

washer M6, galvanized

Quality: 3

Washers corrugated M6x14 (French name: Striees). Content: 70 units. These grooved washers were original Installed at French vehicles!

Quality: 2

Washers corrugated M6x18 (French name: Striees). Content: 45 units. These grooved washers were original Installed at French vehicles!

Quality: 2

M6x10 / screw galvanizes. For the securement of wheel brake cylinder.

Quality: 3

Screw M6x20, galvanized

Quality: 3

Screw galvanized M6x30

Quality: 3

screw M6x70, galvanized

Quality: 3

• Suitable for this article
• Nut M6, galvanized
  0,15 €

M7 welding nut (DIN929). Per piece

Quality: 3

Spring washer M7 high-grade steel

Quality: 3