Der Franzose Automobiltechnik GmbH - www.franzose.de
Cart
Deutsch Englisch Französisch
Sichere Zahlöungen mit mollie

Spare Parts and Tools & Accessories for Sonstige-Citroen Xantia

Citroën Xantia
BX successor, saloon and break, good engines, sophisticated hydractive with excellent chassis,
especially the Hydractive and Activa models. 1993-1994

NEW From now on we offer you many original workshop books for many models free of charge and for everyone.

All Books Xantia
Repair manuals
Spare parts catalogues
Technical information
20 Articles
Shipping country Shipping country

Battery charger for 6 volts + 12 volts (OptiMate 5 6V/12V). Charging capacity: 3 amps at 12 volts

4 amps at 6 volts. This battery charger and trickle charger only charges lead-acid batteries (i.e. the batteries in classic cars). It can be used for both 6 volt and 12 volt batteries. This charger can also reactivate deeply discharged batteries (up to a discharge of 0.5 volts)! The clever electronics make it possible. You can also test batteries. It has a fuse circuit in case it is connected incorrectly. It controls the charging current according to the ambient temperature and has many other options. Regular desulphation is important for a long battery service life. And this is what these modern chargers can do.

Battery charger - trickle charger for winter storage (OptiMate 1). Switchable between 6 volts and

12 volts. This small continuous charger is ideal for permanently connecting to a battery during the winter break. State-of-the-art technology protects against reverse polarity of the connections. It is suitable for normal lead batteries (those with acid). The maximum charging current is 0.6 amps. Please note: You cannot use this charger to quickly charge or reactivate empty batteries! It is therefore designed to keep the battery fresh and, if necessary, charge it very slowly. The scope of delivery also includes a charging cable that can be permanently connected to the battery. Simply route the plug connection to the outside and the charger can be connected without opening the bonnet.

Battery charger for 12 volts (OptiMate 6 Ampmatic). Charging capacity: 6 amps. The 'Swiss Army

knife' among battery chargers. You can connect all types of batteries (STD, AGM, EFB, GEL batteries). Almost all sizes can also be connected (3AH > 144Ah). This charger can even reactivate deeply discharged batteries (down to a discharge of 0.5 volts)! Its smart electronics make it possible. You can also test batteries. It has a safety circuit in case it is connected incorrectly. It controls the charging current according to the ambient temperature and has many other options. Whether it's a lawnmower, boat, car, motorhome, motorbike or tractor, this charger automatically adjusts to everything. And let's be honest, who knows what kind of battery is installed in modern vehicles these days? With this, it doesn't matter! Only modern electric vehicles cannot be charged with it! Of course, it can also be used as a normal battery maintenance charger. Our tip if you have several vehicles that are stored over the winter: get one of these chargers and equip the other vehicles with our maintenance chargers. The scope of delivery also includes a charging cable that can be permanently connected to the battery. Simply route the plug connection to the outside and the charger can be connected without opening the bonnet. Regular desulphation is important for a long service life of lead-acid batteries. And this is what these modern chargers can do.

Glass and metal adhesive,special glass-metal glue, mirrors adhesive and glass-on-glass adhesive. We

searched for a long time and tried different products. This adhesive, which dries and hardens under UV light, is perfectly suited for fixing interior mirrors(rear-view mirrors) of a DS, window handles for sliding windows (Renault R4) or for the handles of triangular windows (VW T3, Alfa Romeo Spider, etc.). The adhesive is thick (gel-like) and should dry under the UV lamp (you also need 3x AAA batteries), also supplied with. As far as the adhesive has not been dried under the UV lamp, you can still make corrections (or wipe off excess adhesive). Of course, you can also use it to glue the handles of beer mugs or the bases of wine glasses! Technical details: Single-component adhesive that dries under UV light. Based on acrylate and polyurethane. The adhesive dries under UV light in the range of 320-400 nm within 15-20 seconds. The adhesive does not yellow. content of delivery: Acrybond adhesive 16 g. 1x UV lamp 1 W (batteries not included). Made in Germany. Believe us, if this adhesive had been available when we were young, we could have saved ourselves a lot of trouble..

Fuel stabiliser - fuel additive - octane booster from ELF/Total, for winter storage and storage of

all 2 and 4-stroke engines. Ideal for our classic cars. Prevents corrosion in the tank and in the entire fuel system. Antioxidants prevent the fuel from ageing (the petrol remains ignitable). Binds and neutralises condensation in the tank. Eliminates starting difficulties when the vehicle has not been used for a long time. And as a special feature, the petrol additive has an octane booster. It therefore increases the ignitability of the petrol (knock resistance). Particularly interesting for regions in this beautiful world where there is no super petrol with at least 98 octane, or if you are involved in motor sports! Packaged in a high-quality aluminium can. Contents: 150ml. Application: 150ml is sufficient for 20 litres of petrol. Fill the tank completely. Fill in the fuel additive. Run the engine for 10 minutes. Done!

Liquid metal 50ml. It is called liquid metal or cold metal. But the correct name is 2-component

epoxy resin. We wouldn't want to be without it in our car first-aid kit and it has helped us many times with minor breakdowns. The 2K material hardens very quickly. It can be sanded, drilled and threaded afterwards. Resistant to water, oil, fuel and many chemicals. Sandable and paintable. Very easy to use thanks to a mixing tube supplied. Other mixing tubes are also available (if you don't need the whole tube).

20 Articles
Shipping country Shipping country

Spare Parts for Citroën Xantia

A real workhorse with French character. The Citroën Xantia – often underestimated, but far from boring. It’s not a car for the ordinary driver, but for those who want more than just four wheels and a steering wheel. In the 1990s, the Xantia was a quiet hero among mid-range cars: comfortable, clever, technically sophisticated – and unmistakably Citroën.

Hydropneumatics? Yes, the Xantia had it too. When it slowly rises in the morning like a cat after a nap, you know everything’s working. And if it doesn’t, it’s usually some little part that’s decided it’s time for a break. But no worries – Citroën Xantia spare parts still exist. And you’ll find them in our online shop. See for yourself!

Buying Citroën Xantia Spare Parts

A Xantia drives as smooth as butter and is still surprisingly tough. But it’s not exactly new anymore. And like any true classic, the Xantia eventually needs the right spare parts. Whether it’s the hydraulic pump, a suspension cylinder, or a door panel slowly peeling off – we’ve seen it all. Our warehouse is well stocked with Citroën Xantia parts. Simply put: if you need something for your Xantia, chances are we’ve got it.

And we’re talking about proper, well-fitting parts. Not sure exactly what you need? Just ask us. We know these cars inside and out. You can easily contact us by email or phone. We’re happy to advise you in German, English or French. Together, we’ll make sure your Citroën Xantia stays in top shape for many years to come.