R8/Alpine 110, collar steering gears, particularly for adjustable tie rods. (our No. 83149)
Suitable for Renault R8, R10 + Alpine A110.
for Alle Alpine
1042 Articles | Page 16 of 21
R8/Alpine 110, tie rod, per piece. The tie rods are specialy produced and adjustable, from 285 to
325mm overall length. Suitable for Renault R8 + Alpine A110. Please compare the dimensions! The tie rods are on the left + on the right identically constructed.
R8/R10, brake pads. Brake system: Bendix. Suitable for Renault R8, R10, Alpine A110. Wide one
95mm. Amount: 40,5mm. Heavy one: 10,2mm. Or. No. 0996038000
R8/R10, brake pads front. Brake system: Bendix. Suitable for Caravelle, R8, R10, Alpine A110. Wide
one: 95mm. Amount: 40,5mm. Heavy one: 10,2mm. The corners lower are chamfered. Or. No. 0996031700.
R8/R10, brake hose rear. Suitable for Renault R8 + R10. Length: 262mm. Thread: 1x female thread 3/8
8 x 24UNF. 1x male thread 3/8 x 24UNF. Made in Europe.
R8/R10/Alpine A110, brake caliper sealing set, rear. Brake system: Bendix. Suitable for Renault R8
R10. Alpine A110. For piston diameters: 32mm.
R8/R10/Alpine, shock absorber front (2 fittings). Suitable for Renault R8 Gordini + R10 Gordini
Alpine A110, starting from year of construction 1968. Matra Jet. Length compressed: 245mm. Length extended: 330mm.
R8/R10/Alpine110, ball and socket joint above, for Renault R8, R10. Alpine A110. Pin height to area
for screwing: 77mm. Thread height: 20mm. Thread measurement: M12 x 1,25. Or. No. 0996006600
R8/R10/Alpine110, ball and socket joint down, for Renault R8, R10. Alpine A110. Pin height to area
for screwing: 65mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 0996006500
R8G/A110, engine gasket set, without cylinder head gasket. Suitable for Renault R8 Gordini R1134 +
Alpine A110 1300VA (1255cc, R1135).
Wheel Stud Restorer Kit. For repairing damaged wheel stud threads using a reverse action to ensure
the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.
Wheel bolt, suitable for many Renault (R5, R5 Alpine, R12, R16). Overall length: 38mm. Thread
M12x1,25. The wheel bolt head has a diameter of 18mm and is 5mm heavily. Or. No. 0554732800
Wheel bearing rear axle. Suitable for Renault R8, R10, Alpine 110, Dauphine, Caravelle. The bearing
is mounted on the full-floating axle. Onto the full-floating axle the wheel plate is then pushed. Outside diameter: 68,0mm. Inside diameter: 25,0mm. Overall height: 19,0mm. Or. No. 0852914400. Made in Spain
Wheel bearing rear. Suitable for Renault R8, R10, Alpine A110, Floride. Outside diameter: 47mm
Inside diameter: 21,9mm. Wide one: 21,75mm.
Wheel nut, suitably for R16TX, R12, R15, R17, R18, R20, R30 etc. Thread: M12 x 1,25. Overall
height: 32,5mm. Tapered. Wrench: 19,0mm. Or. No. 7700618233
Wheel nut, suitable for Renault R16TX, R12, R15, R17, R18, R20, R30 etc.. Thread: M12 x 1.25
Height: 38.5mm. Tapered collar. Width across flats: 19.0mm. Or. No. 7700532727
The brake-down aid for on the road. SONAX TyreFix restores driveability to flat tyres, without tyre
change. Seals small holes in the tyre and pumps it up. Practical, fast and safe. 400ml
Tire valve adapter of TR13 (13mm) on TR15 (15mm). This adapter is required, if you have old rims
with 15mm hole for valves. New valves are always 13mm in the diameter.
Renault emblem, universal. Dimension: 62 x 50mm. Material: Synthetic. Fastening: 2x split pins with
5mm diameter (the pins have a bar, with bar the diameter is 6mm).
Rosette 13/5mm with screw. Contents: 12 pieces + 12x screw 4mm/16mm. This rosette consists only of
a punched-out sheet metal which has been nickel-plated. They are not as sturdy and pretty as our numbers 21143, 21144, 21145, but these rosettes are more like the original rosettes used in early Citroen 2CV, R4, Dauphine etc. Higher-quality vehicles were more likely to have our shiny alternatives (e.g. Citroen DS).
Rosette from rubber synthetic, frame of the trunk lock, suitable for Renault R16, R5, R6, R18. 1
art drinking hook. Inside diameter: about 20mm. Outside diameter: about 32mm. Or.Nr. 556130100
Rosette nickel plated. For 4mm screw. Outside diameter: 11mm. Height: 2,4mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 4mm screw. Outside diameter: 12,7mm. Height: 2,5mm. These rosettes were
used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm. These rosettes were
e used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault. Our rosettes are shiny and flanged at the back. This makes them very stable.
Rust eraser pen. Ideal for removing even the smallest rust spots. Indispensable! And, of course
the cleaned rust spot must then be preserved with paint immediately.
Return stop (valve) for fuel or windscreen washer fluid. Connection: 6 mm. This valve is a real
improvement for classic vehicles that use a hand pump without a ball valve to deliver water. This ensures that windscreen washer fluid is always available at the spray nozzles. Please note the direction of flow during installation! It also prevents petrol from flowing back in the fuel line (useful for longer periods of inactivity). Please install this valve close to the petrol pump (between the petrol pump and the tank).
Reflector square, framed in metal. With fixing straps, dimensions approx. 60x45mm. These reflectors
were used in many French cars!
Switch - push button, square, with chrome frame. Universally suitable. Please note: this is a push
button and not a toggle switch. The push button is useful for electric windscreen washers, horns or headlight flashers, for example. Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Square switch with chrome frame. The switch also has an indicator light (bulb base Ba9s). Universal
switch for e.g. heater blowers, additional consumers.... Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Switch for the reversing lamp. Suitable for Renault R4, R5, R6, R16. Thread: M16 x of 1,0. 2
electric plug contacts.
1042 Articles | Page 16 of 21
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
