Alle / Dyane / clutch

Clutch release yoke axle (in the transmission bell housing), suitable for Citroen 2CV6. Length: 125mm.

Quality: 4

Clutch release lever spring. (Clutch). Reproduction. Suitable for CITROEN 2CV6, starting from year of construction 1981. Or.Nr.: AM314-9.

Quality: 4

Clutch release yoke for the clutch. Old version (first 602cc version), suitable for Citroen 2CV, Dyane, AMI. Or.Nr.: AM314.4

Quality: 4

Clutch release yoke for the clutch. Suitable for 2CV6 + 4, final version, starting from year of construction 03/1982.

Quality: 4

• Suitable for this article
• Clutch release lever plastic sleeve, for the bearing in the clutch housing. Suitable for Citroe
  2,33 €

Clutch release lever plastic sleeve, for the bearing in the clutch housing. Suitable for Citroen 2CV4 + 2CV6.

Quality: 4

Clutch release sleeve 2CV6 + 2CV4, Installed of year of construction 1970 to 1982. Reproduction.

Quality: 4

Clutch release sleeve 2CV6, Installed starting from year of construction 02/1982. Reproduction. Made in Europe

Quality: 4

Clutch release sleeve locking spring, for Citroen 2CV6 starting from year of construction 02/1982.

Quality: 4

Centrifugal clutch bearing for 2CV6+4, measurement: 17x40x12mm, Inside diameter: 17mm, outside diameter: 40mm, overall height: 12mm. Or.Nr.: ZC9620103

Quality: 2

Clutch set for Citroen 2CV6 + 2CV4, of year of construction 1970 to 1982. (For vehicles with drum brake in front). Dyane of year of construction 1968 to 1982. Mehari from 1968 to 1982. The clutch set consists of: Pressure plate (3 levers) clutch disk and clutch release sleeve. Reproduction, made in Europe. Note: The clutch must be adjusted after Citroen work instruction A.312-00!

Quality: 3 Pdf

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitabl
  9,82 €
• Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original manufacturers! The best
  12,84 €
• M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for
  0,37 €

Clutch set for Citroen 2CV6+4, of year of construction 1970 to 1982. Change of three fingers pressure plate on multi-disk. Completely with clutch release sleeve. (Pressure on the pedal is lower)

Quality: 3

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for
  0,37 €

Clutch set for Citroen 2CV6, starting from 02/1982, with torsion bars. The new clutch disk with torsion bars prevents starting acceleration bucking by e.g. light axial runout of the fly wheel or pressure plate. 160mm diameter, 18 teeth.

Quality: 1

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitabl
  9,82 €
• Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original manufacturers! The best
  12,84 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,46 €
• M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable f
  0,68 €
• Fly wheel, new part. Suitable for Citroen 2CV 6, starting from year of construction 03/1982. We
  158,57 €

Clutch completely, for Citroen 2CV6, of year of construction 03/1982 to 1990 (disc brake in front). Dyane 6, starting from year of construction 1982. Mehari, of year of construction 4/1982 to 1990. Manufacturer: Valeo. 18 teeth, diameters: 160mm. (Multi-disk) new part.

Quality: 2

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• Shaft seal crankshaft rear for 2CV6. Measurements: 56x69x10mm. Original manufacturers! The best
  12,84 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,46 €
• M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable f
  0,68 €
• Fly wheel, new part. Suitable for Citroen 2CV 6, starting from year of construction 03/1982. We
  158,57 €

Clutch set for Citroen 2CV6, starting from year of construction 03/1982. Reproduction, Made one in European Union. 18 teeth, diameters: 160mm. (Multi-disk) new part.

Quality: 4

• Suitable for this article
• Clutch cable for Citroen 2CV6, Acadyane, Mehari. Installed one until 1990. Length: 705mm. Made
  11,81 €
• Fly wheel, shaft seal for the gearbox main shaft (primary shaft) in the fly wheel. Suitable for
  2,93 €
• M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable f
  0,68 €

Clutch disk centrifugal clutch. Suitable for Citroen 2CV starting from year of construction 04/1966. 160mm diameter. 18 teeth. Or.Nr.AZ313-01C

Quality: 3

Clutch disk starting from 02/1982. Suitable for Citroen 2CV6.

Quality: 4

Clutch disk, starting from year of construction 03/1982. Suitable for Citroen 2CV6. Diameter: 160mm. Number of teeth: 18. Hub profile: 17,8x20,3-18N. Manufacturer: Sachs!

Quality: 2

Clutch disk, to year of construction 02/1982. Suitable for Citroen 2CV6. Diameter: 160mm. Number of teeth: 18. Hub profile: 17,8x20,3-18N. Manufacturer: Sachs!

Quality: 2

Centring (from synthetic) for the clutch. Suitable for Citroen 2CV

Quality: 3

Clutch Alignment Tool, Universal. For single plate clutches. Suitable for flywheels with or without pilot bearing. Fast to fit and remove. Universal applications. Size of collets: 14mm to 28mm across 3 adaptors. Cone size range from 35mm < 67mm (for almost all classical french cars)

Quality: 1

M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for Citroen 2CV6 + 2CV4, to year of construction 1981.

Quality: 3

M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable for Citroen 2CV6, starting from year of construction 1981.

Quality: 3