Alle / Dyane / engine cooling

Exhaust air hose from rubber, for Citroen Dyane. Special preparation. This hose is an genuine improvement.

Quality: 1

• Suitable for this article
• Hose clamp 70 - 90mm. Suitable for exhaust air hose, for Citroen 2CV4 + 2CV6.
  1,98 €

Grid for the engine fan case (602cc). Suitable for Citroen 2CV6, Dyane 6, Mehari. Very good reproduction. Securement with 4 screws.

Quality: 3

• Suitable for this article
• Screw set (with washers) for the grids for the engine fan case. Suitable for Citroen engines wi
  2,63 €

Grid for the engine fan case. Suitable for Citroen 2CV6. Reproduction. The grid is galvanized. Securement with 4 screws

Quality: 4

• Suitable for this article
• Screw set (with washers) for the grids for the engine fan case. Suitable for Citroen engines wi
  2,63 €

Screw set (with washers) for the grids for the engine fan case. Suitable for Citroen engines with 602cc + 435cc.

Quality: 3

Rubber largely in the engine fan case, mounts before the ignition. Suitable for Citroen 2CV. Made in Germany.

Quality: 3

• Suitable for this article
• Retaining strip for the rubber in the engine fan case. Suitable for Citroen 2CV.
  7,05 €
• Rubber screw set (securement rubber before the ignition, in the engine fan case). Suitable for
  13,78 €

Retaining strip for the rubber in the engine fan case. Suitable for Citroen 2CV.

Quality: 3

• Suitable for this article
• Rubber largely in the engine fan case, mounts before the ignition. Suitable for Citroen 2CV. Ma
  11,35 €
• Rubber screw set (securement rubber before the ignition, in the engine fan case). Suitable for
  13,78 €

Rubber small in the engine fan case, mounts before the ignition. Suitable for Citroen 2CV. Made in Germany.

Quality: 3

Rubber screw set (securement rubber before the ignition, in the engine fan case). Suitable for Citroen 2CV6, Dyane 6.

Quality: 3

Fan blade for 2CV4, Dyane 4, AZU of 250. 8 vanes, color black. Original supplier. Securement with 4 screws. Outside diameter 230mm. Diameter inside: 177mm. Pitch diameter: 162mm.

Quality: 2

Fan blade for 2CV6, 9 vanes. (Or.Nr. 5433422 or AM241904), securement with 6 screws, good reproduction. Outside diameter 265mm. Diameter inside: 175mm. Pitch diameter: 160mm.

Quality: 3

• Suitable for this article
• Belt pulley (without fan blade + V-belts) for Citroen 2CV4+6.
  39,57 €
• Belt pulley (without fan blade + V-belt), better than original (Made by Franzose). Suitable for
  97,08 €
• Fan blade screw set (6 pieces). Suitable for Citroen 2CV6, Dyane 6.
  4,21 €

Fan blade for 2CV6, 9 vanes, color black. Original supplier. Securement with 6 screws. Outside diameter 265mm. Diameter inside: 177mm. Pitch diameter: 162mm.

Quality: 2

• Suitable for this article
• Belt pulley (without fan blade + V-belts) for Citroen 2CV4+6.
  39,57 €
• Belt pulley (without fan blade + V-belt), better than original (Made by Franzose). Suitable for
  97,08 €
• Fan blade screw set (6 pieces). Suitable for Citroen 2CV6, Dyane 6.
  4,21 €

Fan blade screw set (6 pieces). Suitable for Citroen 2CV6, Dyane 6.

Quality: 3

Engine starting crank, suitable for Ciroen 2CV4 + 2CV6. Reproduction

Quality: 3

• Suitable for this article
• lifting jack like original, Citroen 2CV6 + 2CV4
  82,21 €

Screw set suitable for the engine cooling system, for Citroen 2CV6. Contants all screws and nuts to mount the casing sheets and die sealing behind the oil cooler.

Quality: 3

Engine fan case (for disc brake). Suitable for Citroen 2CV6, Dyane, AK, Mehari. Reproduction.

Quality: 4 360°

Engine fan case (for drum brake). Suitable for Citroen 2CV6, Dyane, AK, Mehari. Reproduction

Quality: 4

Generator cover for Citroen 2CV6. (Cover on engine fan cases above). Or. No. AM532-60A

Quality: 3 360°

• Suitable for this article
• V-belt 9,5x762mm. Suitable for Citroen 2CV6 + 2CV4, to year of construction 1990.
  5,25 €

Engine fan case, suitable for Citroen 2CV4, starting from year of construction 09/1971. Dyane 4 original Citroen. New old stick.

Quality: 0

Tie-clip for the engine cowling sheet metal, for Citroen 2CV (8 per side are required. (to it suitable screw = 20170)

Quality: 4

• Suitable for this article
• Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.
  0,38 €

Engine cowling around the liner, above on the left (air circulation). Material sheet metal. Suitable for Citroen 2CV6

Quality: 4

Engine cowling around the liner, above on the right (air circulation). Material sheet metal. Suitable for Citroen 2CV6

Quality: 4

Engine cowling around the liner, down on the left (air circulation). Material sheet metal. Suitable for Citroen 2CV6.

Quality: 4

Engine cowling around the liner, down on the right (air circulation). Material sheet metal. Suitable for Citroen 2CV6.

Quality: 4

Engine cowling set (4 pieces), for Citroen 2CV6. Reproduction out of sheet metal! (Air circulation around liners).

Quality: 4

• Suitable for this article
• Tie-clip for the engine cowling sheet metal, for Citroen 2CV (8 per side are required. (to it s
  0,57 €
• Sheet metal driving screw with large head, black galvanizes. Measurements: 4.2 x 19 mm.
  0,38 €

Belt pulley (without fan blade + V-belts) for Citroen 2CV4+6.

Quality: 3

• Suitable for this article
• Belt pulley, screw for the securement of the belt pulley on the crankshaft. Suitable for Citroe
  2,93 €
• Fan blade for 2CV6, 9 vanes, color black. Original supplier. Securement with 6 screws. Outside
  21,77 €

Belt pulley (without fan blade + V-belt), better than original (Made by Franzose). Suitable for Citroen 2CV6, Dyane, Mehari. The belt pulley has been rotated from a 18kg steel block DIN 1,0501 (AISI/SAE 1040, EN C35). Fine balanced pulley, thus avoiding much pressure on the crankshaft. No risk of tearing off as it is not welded. Belt pulley is yellow galvanised (like original). Made by Franzose/Cipere, entire production process in Europe.

Quality: 1

• Suitable for this article
• Belt pulley, screw for the securement of the belt pulley on the crankshaft. Suitable for Citroe
  2,93 €
• Fan blade for 2CV6, 9 vanes, color black. Original supplier. Securement with 6 screws. Outside
  21,77 €
• Fan blade screw set (6 pieces). Suitable for Citroen 2CV6, Dyane 6.
  4,21 €

Belt pulley, screw for the securement of the belt pulley on the crankshaft. Suitable for Citroen 2CV, with generator propulsion over V-belts. (2CV6 + 2CV4)

Quality: 4

• Suitable for this article
• 14mm nut for the belt pulley. Suitable for Citroen 2CV. The nut is thin-walled, and has a 3/8 c
  4,86 €
• spring washer M10, galvanized
  0,24 €

Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges. This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.

Quality: 1

• Suitable for this article
• Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.
  24,69 €

hose clamp for 15-20mm.

Quality: 3

hose clamp for 40-60mm.

Quality: 3

Hose clamp Screwdriver hexagon (7mm). Flexible. Ideal for our hose clamps with raised edges.

Quality: 1

• Suitable for this article
• Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,56 €
• Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,62 €
• Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,72 €
• Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,82 €
• Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  3,92 €
• Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  4,17 €
• Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  4,26 €
• Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  4,42 €
• Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  4,71 €
• Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
  5,40 €