for Citroën 2CV AX

Valve grinder suction cup. 1x 28+34mm

Valve grinding-in paste (engine valves in the cylinder head), 100ml box. The double box contains

pre-grinding paste (rough) and regrinding paste (fine).

• Suitable for this article

Valve clearance gauge. 0,05 > 1,00mm. Precision - feeler gage with conical lamellas

universal valve spring cpmpressor, for the development of the valves + valve springs.

Valve caps for the tire. With Citroen Logo. Set = 4 fittings!

First aid kit Compact, according to DIN 13164. Length: 215mm. Wide one: 55mm. Amount: 130mm

Original LEINA!

Carburettor jet cleaning tool. Essential for carburettor maintenance and cleaning in your classic

car. The scope of delivery includes five stainless steel nylon brushes with diameters of 2, 3, 4, 5 and 7 mm and a brush length of 30 mm. Ten stainless steel cleaning needles with diameters of 0.7, 0.9, 1.1, 1.3 and 1.4 mm. A 4 mm Allen key and twelve round carbon steel files with diameters of 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 1.1, 1.2, 1.3, 1.4 and 1.6 mm. A flat file is also included.

End cap rubber. 10mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 12mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

End cap rubber. 14mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

• Suitable for this article
• 
  hose clamp for 15-20mm.
  0,93 €

End cap rubber. 16mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 18mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 21mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 23mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 26mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

End cap rubber. 8mm inside diameter. E.G., for plugging water pumps or heater radiator connections.

Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating

g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!

• Suitable for this article
• 
  T-connector fuel pipe, 3mm, also suitable for the screen wash.
  2,13 €

Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating

g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!

• Suitable for this article
• 
  T-connector fuel pipe, 4mm, also suitable for screen wash.
  2,18 €
• 
  Wiper nozzle synthetic grey. Universal fitting. 4mm hose connection. The wiper
  9,82 €
• 
  Windscreen washer nozzle black. Universal fitting. 4mm hose connection. The
  4,86 €

Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating

pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!

• Suitable for this article
• 
  T-connector for fuel pipe, 5mm, also suitable for the screen wash.
  2,18 €

Wiper blade (1 pieces), 400 mm, Valeo. For Peugeot 104, 305, 504, Citroën C15, CX, GS, AX, Renault

Alpine A110 + A310, Renault R9, R11, R12.

Self-adhesive trim. Width: 12mm. Length: 10 metres.

Zinc primer, 400ml.

Spark gap measurement (testing) tool. With the help of this small, inexpensive tool, the spark gap

of the spark plug can be checked very easily and safely. So, if the engine does not start: Is the spark plug sparking at all! And if so, how strong! Then exclusion procedure: Ignition OK? It is not getting any petrol!

Flexible Spark Plug Remover/Installer. This specially designed tool allows access to spark plugs

where they are deep seated or require off-line access. The tool is also designed to grip the spark plug securely allowing the removal with ease.

Tap drill M14x1,25. (Spark plug threads).

• Suitable for this article

Heli coil spark plug thread repair set. For all M14 spark plugs. Contents: 1 bore + cutting tool

installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).

Spark plug thread Helicoil insert. M14x1,25x12,7 (spark plugs with short thread 2CV, R4). Refill

package (10 pieces)!

Spark plug wrench (tube wrench), for 20.8 mm spark plugs. 300mm long! Particularly for Citroen DS

Peugeot 203, 403, 404, 504. Workshop quality!

Spark plugs plug 90° bent.

Ignition module of 3+2 connections. Used with Citroen BX, AX, C15, ZX. Peugeot 205, 305, 309, 505

605

Ignition module 7 pin. Used with BX, AX, CX, VISA, C15, ZX, C25. Peugeot 104, 205, 305, 309, 504

505, J5.

Starter lock blank key. Suitable for Citroen Dyane, from 1980 to 1983. Citroen CX, only year of

construction 1985. Citroen VISA from 1984 to 1985. C15 from 1985 to 1995. Peugeot 305, from 1981 to 1982. For starter lock manufacturers: NEIMAN. Please observe the cross section of the key bit. Shaft length: 36,0mm. Shaft width: 8,2mm.

Spark Indicator. This non-contact spark tester will test for the presence of power in spark plugs

coils and distributors. Simply place the grooved end over the spark plug wire with the engine running and the high intensy bulb will flash indicating spark. Note: Depending upon screen of the ignition cables, it can be possible, that you see the flashing by daylight, very bad!

Brake cylinder hone. For use with a cordless drill to clean brake cylinders during service

22-69mm. For honing out brake cylinders. For use with a standard drill.

• Suitable for this article
• 
  Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.
  9,27 €

Engine cylinder hone. Enables the inside surface of the cylinders to be cleaned of carbon deposits

etc. Suitable for all cylinders with a bore diameter of 50

• Suitable for this article
• 
  Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.
  20,81 €