Citroen-2CV / R5 + R6 / crankshaft-camshaft-piston-flywheel

Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings: 1,75 + 2.0 + 4,0mm. Renault R5, R12, R15 (R1224, R1330, R1337).

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Piston ring set, per piston. Suitable for Renault engine: 1289cc. Bore: 73,0mm. Piston rings: 1,75mm + 2,0mm + 4,0mm. Renault R5, R6, R10, R12 (R1192, R1170, R1171, R1337, R2126, R2136, R2137).

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), 1 oversize 0,10mm. Dimension: Inner diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 3

R4/4CV/Dauphine/R5, crankshaft thrust washer (axial clearance), standard dimension. Dimension: Inner diameter 44mm, outer diameter 55,6mm, 2mm thick. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800,B1B, 800 70. Capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 1 oversize (+0,25). Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). 2 oversize (+0,50). Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine/R5, crankshaft bearing set (3 bearing, B = Billancourt). Standard dimension. Wide one: 1x 27,10mm, 1x 30,10mm, 1x 32,84mm. Crankshaft: 39,975 to 39,990mm. Suitable for Renault engine: 662, 680 702, 690, 839 706, 670, 800, B1B, 800 70. Engine capacity 603cc, 748cc, 782cc, 845cc. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride

Quality: 2

R4/4CV/Dauphine, connecting rod bearing (complete set). Dimension: Standard dimension. (41.128 to 41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.

Quality: 2

R4/4CV/Dauphine/R5, connecting rod bearing set. Wide 21,16mm. 1 oversize (+0,25). Suitable for Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)

Quality: 2

R4/4CV/Dauphine, connecting rod bearing set. Wide 21,16mm. 2 oversize (+0,50). Suitable for Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.

Quality: 2

R4/Estafette/Dauphine/Floride, piston + liner (4 pieces). Engine: Ventoux 670, 670-1, 670-5, 800-02. Engine capacity: 845ccm. Suitable for Renault R4 (5CV), Estafette (R1090, 1091, 1092, 1092, 1095, 2101 2130, 2131), Dauphine + Ondine + Gordini, Floride, Fourgonette, R6 (R1180 09/1968 to 04/1969). Bore: 58,0mm. Piston pin: 14 x 48mm. Piston rings: 1,75 + 2 + 3,5mm. Outside diameter down: 62,50mm. Outside diameter above: 73,0mm. Height totally: 126,0mm. Attention: It is importand that the liners are mounted with copper rings at the bottom. Our article number 80182

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• Liners sealing rings down, made of copper. Diameter: 62,5x70x1mm. Suitable for the following Re
  9,82 €

R4/R5, piston + liner (4 item). Suitable for Renault R4 (R1123, R1124, R2104, R2106), of year of construction 1969 to 1986. Renault R5L + R6. Engine: 800 B1B, 800 10 02/03/01/05. Engine capacity: 845cc. Compression: 8: 1. Piston pin: 16 x 49mm. Piston rings 2,0/2,0/3,5. Outside diameter down: 62,50mm. Outside diameter above: 69,80mm. Height totally: 126,0mm. Mounting with paper seal for the liners (no copper seal)

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• Liner seal down (12 fittings). Suitable for engine: 680/839-06/800-B1B. Engine capacity: 747cc
  14,78 €

R4/R5, piston + liner (4 item). Suitable for Renault R4 (R1126, 2109, 2392). R5 (R1220). Engine: 839. Engine capacity: 782cm ³. Bore: 55,80mm. Piston pin: 16 x 46mm. Piston rings: 1,75 + 2.0 + 3,5mm.

Quality: 3

R4/R5, piston + liner (4 item). Suitable for Renault R4 + R5. Engine: 689.10. 956cc (37 - 44HP). Bore: 65mm. Piston pin: 18 x 57mm. Piston rings: 1,75 + 2.0 + 3,5mm. Outside diameter down: 75,50mm. Outside diameter above: 85,80mm. Height totally: 135,0mm

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5, piston rings, for 1 piston. Suitable for Renault R4 + R5. Bore: 65,0mm. Engine capacity: 956cc. Piston rings: 1,75 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Camshaft drive chain, 64 chain links (simplex chain). Suitable for Renault R4, R5, R6, R8, R12, TWINGO. Engines: C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700.

Quality: 2

• Suitable for this article
• Camshaft drive chain tensioner. For camshaft drive chain with 64 links. Engine: 800 B1B. Engine
  22,71 €

Gear camshaft. 34 teeth. Suitable for Renault R4, R5. Note: The gear has centrically in the mounting a pin! Engines 1108cc + 956cc. Installed by the R4 from 06/1978 to 06/1990. By R5 from 01/1972 to 12/1985. Or.Nr. 7700655335

Quality: 2

R4/R5/Estafette/Caravelle, thrust washer for the crankshaft, from 1975 onwards. Engines Renault: 688.02/10/11,688, C1E (1108ccm). Standard dimension

Quality: 3

Gear camshaft, 34 teeth. Suitable for Renault R4, R5, R10. 845ccm, 1108ccm, 1289ccm. Note: The mounting centrically has a projection!

Quality: 4

R4/R5/R12, gear rim fly wheel. 117 teeth. Suitable for Renault R4, R5, R12. Inside diameter: 22,2cm. Outside diameter: 24,7cm. Thickness: 0,8cm.

Quality: 3

R4/R5/R6/Caravelle, piston rings (engine 1108cc), for 1 piston. Bore: 70mm. Suitable for Renault R4, R5, R6, Caravelle. Piston rings: 2,0 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/Caravelle, piston rings 70,0mm, for 4 pistons. Suitable for Renault R4, R5, R6, Caravelle. Engine capacity: 1108cc. Bore: 70,0mm. Piston rings: 1,75 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/Dauphine, piston rings, for 4 pistons. Suitable for Renault R4, R6, R6, Dauphine. Engine: 800/10, 800/01, 800/02. 800/A7. Engine capacity: 845ccm. Bore: 58,0mm. Piston rings: 1,75 + 2,0 + 3,5mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/Floride/Dauphine, piston rings (engine 845cc, B1B), for 1 piston. Bore: 58mm. Suitable for Renault R4, R5, R6, Floride + Dauphine. Piston rings: 1,75 + 2.0 + 3,5mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with engine capacity: 1108cc (34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.

Quality: 2

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €
• Liners gasket bottom (12 pcs.. white = 0.06mm / grey = 0,07mm / red = 0,09mm). Suitable for Re
  14,78 €

R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines: C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)

Quality: 2

• Suitable for this article
• Camshaft drive chain tensioner. For camshaft drive chain, with 58 links. Engine: C, C1C, C1E, 6
  29,66 €

Gear crankshaft, 17 teeth, suitable for Renault R4, R5, R8, R10. Engines 956cc, 1108cc, 1289cc. Installed from 11/1962 to 06/1990. Or. No. 7700564247.

Quality: 4

R4/R5/R8/R10/Caravelle/Estafette, crankshaft bearing. Wide one: 2x 24,47mm + 3x 19,48mm. Standard dimension. For crankshaft from 45,989 to 45,999mm. Suitable for Renault engines: 689 710 + C1C 700 (956cc). 688 711 + 713, 688 1 (1108cc).

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm diameter. 0,25 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm diameter. 0,50 oversize. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

Quality: 2

R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 54.8mm diameter. Standard size. Width: 5x 19,47mm. Suitable for Renault engines: 688 1, C1E700, C1E754, C1E715, C1E720, C1E750. cubic capacity: 1108cc. For engines from 1975 onwards! Crankshafts with 44mm diameter were used until 1974.

Quality: 2

R4/R5/Estafette/Caravelle, thrust washer for the crankshaft, up to year of manufacture 1975. engine Renault Cleon: 810. standard size

Quality: 3

R4/Estafette/Caravelle, connecting rod bearing set, 1 oversize (+0,25). Wide one: 20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc). These engines were used in Renault R4, R4F4, R4F6, etc.

Quality: 2

R4/Estafette/Caravelle, connecting rod bearing set, 2 oversize (+0,50). Wide one: 20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc). These engines were used in Renault R4, R4F4, R4F6, etc.

Quality: 2

R4/Estafette/Caravelle, connecting rod bearing set, standard dimension. (43.965 - 43,980mm). Width: 20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 192 + 688 1 (1108cc) starting from year of construction 1975. Engine 810 01 to 810 29 (1289cc). 810 96 + 810 97 (1289cc). C1G + C1J (1397cc). These engines were used in Renault R4, R4F4, R4F6, etc.

Quality: 2

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....

Quality: 2

R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. Standard size. Fits Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......

Quality: 2

R5 Alpine Turbo, piston + liner (4 item). Suitable for Renault R5 Alpine Turbo. Engine: 840.26. Engine capacity: 1397cc. Bore: 76mm. Piston pin: 20 x 62mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 80,60mm. Outside diameter above: 90,10mm. Height totally: 134mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R5 Alpine Turbo, piston + liner (4 fittings). Suitable for Renault R5 Alpine Turbo. Engine: CI J 782/760. Engine capacity: 1397cc. Bore: 76mm. Piston pin: 20 x 63,50mm. Piston rings 1.75 + 2 + 4,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

R5 Alpine, piston + liner (4 item). Suitable for Renault R5 Alpine 1400 (R1223). Engine: 840. Bore: 76mm. Piston pin: 20 x 65mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 80,60mm. Outside diameter above: 90,10mm. Height totally: 134,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Connecting rod bearing set. Suitable for Renault R5 Turbo (midengined). Diameter: 43,98mm. Wide one: 17,70mm.

Quality: 3

R5/R10/R12/R15, piston + liner (4 item). Renault engine 810 (1289cc). Suitable for Renault R5LS, TS, GTL. R5 Alpine. R10-1300. R12TS, LN, TR. R15TL, GTL. Bore: 73mm. Piston pin: 20 x 62. Piston rings: 1,75 + 2 + 4,0mm. Compression: 9,5:1. Outside diameter down: 78,41mm. Outside diameter above: 87,78mm. Height totally: 134,0mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Flywheel bolt (per piece). Suitable for Renault R4, R5, R6, R7, R8, R10... Original Renault! M 9x1,0 x 25mm, Or. No. old: 0706307900. Or. No. new: 7700854191

Quality: 2

Shaft seal crankshaft 35 x 50 x 8. Suitable for Renault R4, Estafette, R5, R9, R11, R12, R15, R17, R19, R21, Nevada, Twingo, Clio, Rapid. Or. No. 7700859691

Quality: 3

Shaft seal crankshaft rear. Dimension: 70 x 90 x 10mm. Suitable for Renault R4 (852cc). R5, R6, R8, R10, R12, R15.

Quality: 2

Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Suitable for R4 (955, 956, 1108cc), R5, Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15. Peugeot 504 V6, 604 V6, Citroen XM V6. Made in Germany.

Quality: 2

Shaft seal crankshaft rear. Dimension: 80 x 100 x 13mm. Improved version from silicone. Suitable for Renault R4 (955, 956, 1108cc). R5, Estafette, R12, Fuego, R11, R20, R30, R25, R16, R15.Peugeot 504 V6, 604 V6, Citroen XM V6.

Quality: 2

Shaft seal crankshaft rear. Suitable for nearly all Renault engines. Also for V6 engines by Peugeot 504, 604. Renault R30, Alpine A310. Dimension: 80x100x8mm. Or. No. 7700859692

Quality: 3