Citroen-2CV / DS / intake and exhaust manifold

Exhaust elbow, with securement for an heat protection shield. 4 in 1 manifold. Suitable for Citroen DS, of year of construction 1966 to 1971. Or. No. DV181-81

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €
• Manifold seal exhaust (40mm inside diameter). Suitable for Citroen DS, starting from year of co
  3,56 €
• Stud bolt M8x45, e.g. elbow securement Citroen DS.
  1,74 €
• Exhaust elbow heat protection shield, without outlet for preheating. Suitable for Citroen DS, t
  47,51 €
• M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W
  2,93 €
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to
  24,69 €

Exhaust elbow, without securement for a heat protection shield. 4 in 1 manifold. Suitable for Citroen DS, of year of construction 1962 to 1965. Or. No. DS1811

Quality: 3

• Suitable for this article
• Manifold seal exhaust (33,4mm inside diameter). Suitable for Citroen DS + Citroen HY. Or. No. D
  7,09 €

Exhaust elbow heat protection plate, with isolation (securement with 4 rivets). Suitable for Citroen DS IE.

Quality: 3

Exhaust elbow heat protection plate, with isolation (securement with 8 rivets). Suitable for Citroen DS IE. Or. No. DX181-213A

Quality: 3

Heat protection plate, on the exhaust manifold. Suitable for Citroen DS IE. Or. No. DX181-213A

Quality: 3

Exhaust elbow heat protection shield down and/or inside. Suitable for Citroen DS, with carburetor engine. Or. No. D5414425W

Quality: 3

Exhaust elbow heat protection shield, inside. Suitable for Citroen DS carburetor + injection engines. Completely small adaptation work is possible. Only this heat protection shield is supplyable. Or. No. DX17114

Quality: 3

Exhaust elbow heat protection shield, with outlet for preheating. Suitable for Citroen DS, starting from year of construction 1972. Or. No. DX18114

Quality: 3

Exhaust elbow heat protection shield, without outlet for preheating. Suitable for Citroen DS, to year of construction 1972. Or. No. DS18114

Quality: 3

Exhaust manifold, 2-piece. Suitable for Citroen DS, with engines DX2, DX3, DX4, DX5. The manifolds are used, checked, sand-radiated.

Quality: 0

Exhaust clip (elbow clip) fixing bolt M7. Flattened head. Overall length: 56mm. Suitable for Citroen DS. Or. No. 1D5412151D

Quality: 3

Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to the flame tube. Suitable for Citroen DS + Citroen HY. Or. No. 5412150T

Quality: 2

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €
• Exhaust clip (elbow clip) fixing bolt M7. Flattened head. Overall length: 56mm. Suitable for Ci
  4,71 €

DS starting from 65, elbow pipe (flame tube), produced from high-grade steel! Suitable for Citroen ID/DS, starting from year of construction 1965. Or. No. D1826A

Quality: 1

DS starting from 65, elbow pipe. Suitable for Citroen ID/DS 19, starting from year of construction 1965. For the engines: DY-DL-DLF-DV-DT. Or. No. DV18251

Quality: 3

• Suitable for this article
• Exhaust clip with fixture (from high-grade steel), for the securement flexible intermediate pip
  22,71 €
• Exhaust clip from metal casting (inside diameter 57mm), for the connection exhaust manifold to
  24,69 €

DS starting from 65, elbow pipe 2 in 1 (Y-pipe). Suitable for Citroen DS, starting from year of construction 1965. Starting from engine DX. Or. No. DX18244.

Quality: 3

• Suitable for this article
• Elbow pipe seal (Y-pipe), suitable for Citroen DS. 42 mm inside diameters. That is the seal, be
  3,92 €

DS starting from 65, elbow pipe 2 in 1 from high-grade steel (Y-pipe). Suitable for Citroen DS, starting from year of construction 1965. Starting from engine DX. Or. No. DX18244.

Quality: 1

• Suitable for this article
• Elbow pipe seal (Y-pipe), suitable for Citroen DS. 42 mm inside diameters. That is the seal, be
  3,92 €

Manifold seal exhaust (33,4mm inside diameter). Suitable for Citroen DS + Citroen HY. Or. No. DS181-2

Quality: 3

Manifold seal exhaust (40mm inside diameter). Suitable for Citroen DS, starting from year of construction 1965. Or. No. 1D 5412 149G + N181-2

Quality: 3

Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x by car. On the left and on the right the seal 30031 is required. Or. No. DX141-11 + 1D 5414 063L

Quality: 2

• Suitable for this article
• Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal is required 2x b
  3,23 €

Manifold seal inlet (43mm inside diameter). Suitable for Citroen DS. This seal is required 2x by vehicle. In the center, the seal 30030 is installed. Or. No. DX141-12 + 1D 5414 064X

Quality: 3

• Suitable for this article
• Manifold seal inlet (3 hole). Suitable for Citroen DS. This seal is required 1x by car. On the
  4,71 €

Manifold seal inlet, centrically. Suitable for Citroen DS19, starting from year of construction 7/1959. Citroen HY. Inside diameter: 42mm. Connector long side: 100mm. Connector short side: 61mm. Bore for stud bolts: 8,5mm.

Quality: 3

Manifold seal inlet, centrically. Suitable for Citroen ID19. Dimension: 48x61x37mm.

Quality: 3

Manifold seal inlet, suitable for Citroen ID19. Or. No. N141-11. Inside diameter: 45mm. Connector long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 9,0mm.

Quality: 3

Manifold seal inlet. Suitable for Citroen DS 23.

Quality: 3

Manifold seal inlet. Suitable for Citroen DS, to year of construction 09/1968. Engine: DY, DL, DLF. Citroen HY. Or. No. DY14111. Inside diameter: 46mm. Connector long side: 105mm. Connector short side: 63mm. Bore for stud bolts: 8,0mm.

Quality: 3

Manifold seal inlet. Suitable for Citroen DS19 + Citroen HY. Or. No. DM141-11. Inside diameter: 45mm. Connector long side: 103mm. Connector short side: 62mm. Bore for stud bolts: 9,0mm.

Quality: 3

Manifold seal inlet. Suitable for Citroen ID19 + Citroen HY. Or. No. DM141-11B. Inside diameter: 39mm. Connector long side: 100mm. Connector short side: 62mm. Bore for stud bolts: 8,1mm.

Quality: 3

Elbow pipe seal (Y-pipe), suitable for Citroen DS. 42 mm inside diameters. That is the seal, between exhaust manifold + Y-pipe (exhaust). Per piece.

Quality: 3

copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper nuts: no rust, no sticking!

Quality: 2

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.

Quality: 3

M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.

Quality: 3

M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).

Quality: 3

Stud bolt M7 on M8. 45mm lengths. Special production!

Quality: 2

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

Quality: 3

• Suitable for this article
• copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copp
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

Quality: 2

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.
  0,88 €

stud bolt M8x35

Quality: 3

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

Quality: 3

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x50, cylinder head exhaust elbow. Suitable for Citroen DS + HY. Original Citroen!

Quality: 2

• Suitable for this article
• M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.
  0,88 €

stud bolt M8x55

Quality: 3

• Suitable for this article
• M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62

Quality: 3

Connection rubber for the intake manifold. Suitable for DS IE (injection engine). Outside diameter: 59mm. Height: 45mm. Per piece. Or. No. DX141117A

Quality: 3

Seal under carburetor (insulating plate), between that intake manifold and the carburetor. Suitable for Citroen DS, starting from year of construction 1965. Or. No. 1D5440931E

Quality: 3

Preheating hose, from the exhaust elbow to the air filter. Suitable for Citroen DS. Length: 270mm. Diameter: 55mm. Or. No. DX171231A

Quality: 3

Preheating hose for the intake manifold (carburetor preliminary heating). Inside diameter: 19/24mm. Suitable for Citroen DS, to year of construction 07/1972 (Solex carburator). Engine: DV. Or. No. DV235-35A

Quality: 3

Preheating hose for that intake manifold (carburetor preliminary heating). Suitable for Citroen DS 19 semi-automatic transmission, of year of construction 1966 to 1968. Inside diameter: 16,0mm + 19,0mm. Or. No. DY235-140A

Quality: 3

Preheating hose for that intake manifold (carburetor preliminary heating). Suitable for Citroen DS, starting from year of construction 07/1972. Or. No. DX235-140A.

Quality: 3

Preheating hose for the intake manifold (carburetor preliminary heating). Suitable for Citroen DS, to year of construction 09/1960. Inside diameter both sides: about 18,0mm. Overall length about: 270,0mm. Or. No. DS142-125A

Quality: 3

Preheating hose for the intake manifold (carburetor preliminary heating). Suitable for Citroen DS, of year of construction 09/1960 to 1965. Diameter: 15-16mm. Or. No. DF14225

Quality: 3