Washer pump electrical. 12 V. Very stable version with galvanized metal fixture. 2x flat plug
connection from above! Made in the European Union. The picture indicates the correct mounting position. The pump section is down, the electric motor above!
for Peugeot 204-304
1145 Articles | Page 20 of 23
Washer pump, electrically, color black. Suitable for Citroen DS. This pump is to be used also very
well for conversion, e.g. 2CV, Dyane, Peugeot, Renault. Note: The pump is not self-priming. The water must run (from alone) inside. Outlet water = power connection side. If the pump works more than 15 seconds without water, it is broken.
Washer pump, for mounting outside of the water reservoir! 12 V. Suitable for Citroen DS, Peugeot
t 104, 304, 504, 505, 604. Or. No. 643422
Foot-operated pump set for windschield wiper fluid. Consisting of foot pump, 2 return flow
stoppers, 1x T-valve, 3 meters hose. Assembly: Starting from the foot pump with the T-valve, 1x to the reservoir (place the valve in such a way that the water from the reservoir can pass through) and 1x to the windshield washer nozzle (valve lets the water pass in the direction of the nozzle). The flow directions are marked with an arrow on the valve. Assembly instruction online in the shop.
PDF FILE Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
Headlamp mounting bolt (stud bolt with ball). Dimension: 5 x 36mm. Thread: M5. Universal suitable
for many French vehicles.
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Blank key for starter lock + door lock. Suitable for Peugeot 104. 204 starting from 1965. 304
starting from 1969. 305 from 1978 to 1980. 404 starting from 1965. 504 from 1968 to 1984. 505 of year of construction 1984. 604 from 1981 to 1984. Talbot Samba. Citroen LN. For lock manufacturers: VACHETTE + SIMPLEX. Please observe the cross section of the key bit. Shaft length: 17,5mm. Shaft wide: 7,1mm.
Blank key for starter lock + door lock. Suitable for Peugeot 104. 204 starting from 1965. 304
starting from 1969. 404 starting from 1965. 504 from 1975 to 1983. 604 from 1975 to 1980. 104 starting from 1972. Renault R4, starting from year of construction 1961 to 1981. Citroen LN + VISA. For lock manufacturers: NEIMAN. Please observe the cross section of the key bit. Shaft length: 22,4mm. Shaft wide: 7,0mm.
Screw set M5-M8 galvanizes. Consisting of: 20x M5x20, 15x M5x30, 25x M6x16, 20x M6x20, 12x M6x25
8x M6x30, 10x M7x20, 8x M7x30, 15x M8x20, 10x M8x30, 8x M8x40. Altogether 151 screws in a clear synthetic box.
Screw-safety-paint, yellow, 20ml bottle including brush. This paint to be fit as sealing and
marking paint and can be directly brought onto the spot which has to be marked.Standart product in the 60´s for marking on gearboxes, engines, hydraulic parts and chassis parts
Heat shrink tubing (kit from 100). These handy sheaths form a protective water resistant insulation
over exposed wiring and electrical connections. Designed for automotive use. Supplied in a plastic organiser.
SEV, condenser. Suitable for Citroen DS (with SEV contact cartridge, starting from year of
construction 01/1969), GSA, HY. Peugeot 404, 504 etc.. Renault R4, R5, Fuego etc.. Length: 35,5mm. Diameter: 17,0mm. Brand manufacturer! Made in France.
SEV, ignition contact (large sickle type). Version SEV S403. This contact fits nearly for all
French cars, from the fifties + sixties, which have a SEV distributor. E.G. for Citroen ID-DS (year of construction 7/1954 to 8/1967). Citroen 11CV + HY. Peugeot 403 + 404 (of year of construction 1960 to 1975). Renault Dauphine, Floride, Caravelle, R6, Estafette. Talbot all models, with SEV distributor. Made in France.
Safety belt automatic mechanism. An alternative for the original belts from Citroen DS (fits very
well). This belt can be also mounted in (as alternative, deviating from the original belt. Please note the dimensions): Peugeot 304, 203, 403, 404, 504 Pick UP. Renault Dauphine, Fregate, Floride + Caravelle to year of construction 1963, Renault R4 starting from year of construction 1978, R16. Belt length 297cm. Buckle connection 45cm. The belt has a "E" approvals! All the seat belts we offer are made in England. Strictly according to European car industry specifications, and of course have the required test marks. Your safety is close to our hearts. Therefore, we do not import cheap safety belts from Asia!
16 ampere fuse with screw-connections, optimal to protect additional loads (devices). The housing
can be equipped with other fuse strengths (ratings) .
Fuse set (glass fuse).Contents: 1x 5A, 10A , 15A, 20A, 30A (amps) each. Dimension: 6,3 x 32mm
Complete in an outer packaging (ideal for the 2CV, DS, HY... travel kit!).
Safety pin, for the securement of the window crank. Suitable for Citroen DS and many other French
vehicles. Dimension: 3 x 18mm.
1145 Articles | Page 20 of 23
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
