Bulb 6 V, 45/40 Watt. in yellow!! Base with 3 pins, base Ba21d. 2CV early years of construction
11CV, Renault + other French vehicles.
for Peugeot Heckmotor
1472 Articles | Page 14 of 30
Bulb adapter rings (2 pieces), from double filament bulb to H4. With this, every headlight that
originally has a double filament bulb (P45) can be converted to an H4 bulb. You get much better light! Universal suitable.
Bulbs support (9,8mm diameter) for speedometer lights, base Ba9s. The lamp holder can be used also
as parking light. For 2CV you require then a rubber with the dimensions: 10x12x1,5mm.
Bulb base (plug) for headlamp. Double-filament bulb + H4. Suitable for Citroen 2CV, HY, DS, Renault
R4, Peugeot 403, 404, etc.
Rubber seal between carburetor + air filter, 38mm connection. Suitable for Citroen 2CV with round
carburetor and many other classical French vehicles.
Rubber seal between carburetor + air filter. Suitable for Citroen 2CV6 with round carburetor
Connection port 50-55mm. You can use it for other french car's.
Rubber cap for the connection to the starter motor. (Protecting cap). This cap should never be
missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm.
Rubber cap for the connection at the generator. (Protecting cap). This cap should never be missing
Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.
Rubber coupling wiper engine (angular engine), inclusive rubber blocks securement wiper engine
Suitable for Peugeot 203, Peugeot 403, Peugeot 404. Renault Floride, Caravelle. Alpine A110 (connection between wiper engine + wiper linkages at the front wall!). Or. No. 6408.04 + 3x 6411.13 + 3x 6411.15
Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën brake line seals, etc
Contents: 1x straight tip, 1x 90° tip, 1x hook tip, 1x piercing tool.
Retaining clip emblems for Citroen, Renault, Peugeot, old models. 2.5mm inner diameter (i.e. for
2.5mm pins on the emblems). Length: 7.5mm. Per piece
Hand brake handle lifting rubber, suitable for Renault R8, R10, Caravelle, Floride, Dauphine
Alpine 110. This rubber is mounted under the hand brake handle. Or.Nr. 5544990
Hand brake cable disc brake. Suitable for Renault Dauphine Gordini R1095, R8 1130 + Floride
starting from Ident. 421238. Caravelle R1133 starting from Ident. 29625. R10 R1190 + R1192 starting from Ident. 243215 (year of construction 1969 to 1972). Length totally: 1870mm. Sleeve: 820 + 810mm. Or. No. 8558509
Hand brake cable drum brake. Suitable for Renault Dauphine R1090, to year of construction 1963
Dauphine Gordini R1091, to year of construction 1963. Floride R1092, to year of construction 1963. Length totally: 1960mm. Sleeve: 2 x 700mm. Or. No. 8544992
Hand brake cable drum brake. Suitable for Renault Dauphine, Floride R1094 + R1095. R8 R1132 +
Floride R1131 to Ident. No. 372240. Caravelle to Ident. No. 205187. Length totally: 1900mm. Sleeve: 830 + 810mm. Or. No. 8551733
Hand brake cable. Suitable for Renault R8 Gordini, starting from Ident. No. 1233. Length totally
1950mm. Sleeve: 880 + 850mm. Or. No. 8558990
Glove box lock completely. Suitable for Peuegot 504 + Renault R16. Renault Caravelle + Renault
Floride. Orignal manufacturer Neiman. No reproduction. Neiman No. 902481
Flexible disk for the steering column. Suitable for Renault R4, R5, R8, R16, R18, Dauphine. Outside
diameter: 76mm. Inside diameter: 24mm. Pitch center diameter: about 50mm.
Rear engine, brake piston 32mm, for the brake caliper rear. Suitable for Renault R8, R10, Dauphine
Floride, Caravelle, A110.
Rear engine, brake piston 38mm, for the brake caliper front. Suitable for Renault R8, R10
Dauphine, Floride, Caravelle, A110
Rear engine, brake power distributor sealing set. Dimensions: 13,5x9mm conical. 16x11mm conical
26x21mm. Suitable for Renault Floride + Caravelle, to year of construction 1970. Renault R8 + R10.
Rear engine, brake caliper sealing set, for 38mm piston! Note: The O-ring is 3,40mm wide. Suitable
for Renault R8+R10, Dauphine, Floride, Caravelle, alpine A110. Cross section of piston sealing ring is angular!
Rear engine, brake caliper sealing set. For piston diameters: 38mm! Suitable for Renault R8, R10
Dauphine, Floride, Caravelle, Alpine A110. The cross section of the piston sealing ring is round!
Rear engine, brake caliper at the rear left (new part). Brake system: Bendix. Piston diameter
32mm. Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine. Thread for brake hose: 3/8 x 24 UNF
Rear engine, brake caliper at the rear right (new part). Brake system: Bendix. Piston diameter
32mm. Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine. Thread for brake hose: 3/8 x 24 UNF
Rear engine, brake caliper repair set, for 1 brake caliper in the front or in the rear (32mm
piston). Suitable for Renault 8 + Alpine 110. This repair set is equipped with sealing rubbers for pistons in 32mm. But note: Only suitable for one brake caliper! Or No. 0870 293,000 + 0870 292,800. Only rubber seals, no pistons!
Rear engine, brake caliper front on the left. Brake system: Bendix. Piston diameter: 38mm. Suitable
for Renault R8, R10, A110, Floride, Caravelle, Dauphine.
Rear engine, brake caliper front on the right. Brake system: Bendix. Piston diameter: 38mm
Suitable for Renault R8, R10, A110, Floride, Caravelle, Dauphine.
Rear engine, repair set for in 1 brake caliper front or rear (38mm piston). Suitable for Renault 8
Alpine 110. This repair set is equipped with sealing rubbers for the pistons in 38mm.
1472 Articles | Page 14 of 30
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
