for Renault Sonstige-Renault

Bulb 6V, H4 with Bilux base (P45T) , 55/60 Watt

Ball lamp 6volt, 10watt. BA15S

• Suitable for this article
• 
  ball bulb 5 Watt 6 Volt base Ba15s / rear light, license plate light
  1,58 €
• 
  lamp base Ba15s, 6 + 12 Volt, single-pole
  13,78 €

Bulb 6Volt, 3 Watt, base W2.1x9,5d. (Control light)

Bulb adapter rings (2 pieces), from double filament bulb to H4. With this, every headlight that

originally has a double filament bulb (P45) can be converted to an H4 bulb. You get much better light! Universal suitable.

• Suitable for this article
• 
  H4 bulb, 60/55W, 12V
  3,77 €
• 
  Bulb 12 V, H4, 55/60 Watt. Manufacturer: PHILIPS. Test winner in many
  7,24 €

Bulb conversion kit, from H4 (base P43t) to LED light! This kit replaces the H4 bulb with an LED

bulb. Significantly brighter light. But beware: This is not authorised in Germany! The kit consists of 2x H4 LED bulbs. You don't have to convert anything, just replace them! For the experts: Colour temperature (K): 6000. Lumen: 2400. 12 Volt.

Box of spare bulbs two-filament, 12 Volt, should always be in your car !

Box of spare bulbs H4, 12 Volt

• Suitable for this article

Bulbs support (9,8mm diameter) for speedometer lights, base Ba9s. The lamp holder can be used also

as parking light. For 2CV you require then a rubber with the dimensions: 10x12x1,5mm.

• Suitable for this article
• 
  Cable grommet, 10x12x1,5mm
  0,98 €

Bulb base (plug) for headlamp. Double-filament bulb + H4. Suitable for Citroen 2CV, HY, DS, Renault

R4, Peugeot 403, 404, etc.

lamp base Ba15s, 6 + 12 Volt, single-pole

• Suitable for this article
• 
  ball bulb 5 Watt 6 Volt base Ba15s / rear light, license plate light
  1,58 €
• 
  Ball lamp 6volt, 10watt. BA15S
  1,65 €

lamp base Ba7s, 6 + 12 Volt, single-pole

• Suitable for this article
• 
  Bulb 6 V, 1,2 Watt. Base Ba7S. For the large control light by older 2CV + HY
  1,83 €
• 
  Light bulb 12V, 2 Watt for pilot lamp (articles 50056-50059 ), socket BA7's
  1,19 €

Graphite oil, lock oil. Ideal for cleaning and lubricating locks (door locks, ignition locks

etc.). 50ml. Graphite oil is a multi-purpose graphite-based lubricant, rust remover and maintenance product. It has excellent penetrating properties, is temperature-resistant and adheres well. It is very well suited for lubricating locks, hinges, slide rails and chains. Graphite oil displaces water and cleans away resinous residues.

Priming, penetrable, for sheet metal parts. 400ml

• Suitable for this article
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

prime coat spray can 500ml, colour grey, fitting to our spray paints, for light enamels (top

coatings)

• Suitable for this article
• 
  silicon remover, painting preparation, (removes grease and Silikon) 500ml
  6,84 €
• 
  Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting
  11,81 €

Silent block M10. Amount: 28mm. Large version for the final silencer. Suitable for Renault R4, R12

R16, R17.

Silent block M8. Diameter: 40mm. Overall height: about 28mm. Thread: M8

• Suitable for this article
• 
  M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).
  0,75 €

Rubber stop for the bonnet. Suitable for various Renault. Hole diameter for securement: 7,5mm. Per

piece!

Rubber cap for the connection to the starter motor. (Protecting cap). This cap should never be

missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm.

Rubber cap for the connection at the generator. (Protecting cap). This cap should never be missing

Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.

Elastic strap with 2 hook loops, length 112 mm (measured from hook to hook). Length including

hooks: 160 mm. This elastic strap is suitable for a wide range of uses. We've been looking for something like this for ages. For example, for securing radiator expansion tanks, air filters, jacks, securing items in the boot, and so on.

H7 bulb clearly, 12 Volt.

Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën brake line seals, etc

Contents: 1x straight tip, 1x 90° tip, 1x hook tip, 1x piercing tool.

Fixture for the rod of the locking mechanism. Suitable for various Renault.

Fixture for angular switches (for mounting under the dashboard). Suitable for switch with 36x18mm

installation hole.

Retaining clip for the seal from the luggage compartment lid. Suitable for Citroen 11CV/15CV

Citroen DS. Dimension: 10 x 14mm. Also suitable for other French vehicles. Or. No. 802698, DM453-120C

Handhold for lacquer aerosol spray. Facilitates exactly and controlled alloting of the spray. A

real alleviation.

szction pump (hand pump) for eG fuel, hydraulic liquid

Hand washing cream, 500ml

Flexible disk for the steering column. Suitable for Renault R4, R5, R8, R16, R18, Dauphine. Outside

diameter: 76mm. Inside diameter: 24mm. Pitch center diameter: about 50mm.

Hardener AK 210, 1 litre, for lacquers. Weight ratio 2 parts lacquer, 1 part hardener. Not for

metallic lacquers!!!!

hardener for filler, tube 25g.

Master brake cylinder, 1 inch (25,4mm) piston. Suitable for Citroen 11CV + 15CV. Citroen HY

Renault Fregate, Juva 4. Simca Vedette, Regence, Versailles to year of construction 7/1955. Made in Europe.

• Suitable for this article
• 
  Brake fluid reservoir with locking cap, for the brake system DOT. Suitable for
  19,73 €
• 
  Collar for the master brake cylinder (for 1 inch (25,4mm) master brake
  4,86 €

Master brake cylinder. Brake system Bendix. Piston diameter: 19,05mm. Suitable for Renault R5, R16

R5, R17, R12, Fuego. Brake line connector: 3x M10x1 + 1x M12x1. Made in Europe.

Heater valve. Suitable for Renault R12, R20. Renault Alpine A310. Or. No. 7701348153

Heli coil application M7. Length: 10,5mm (Thread repair)

Heli coil application M7. Length: 14,0mm (Thread repair)

Heli coil application M7. Length: 7,0mm (Thread repair)

Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low

shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.

Helicoil repair set for M7. Consisting of: Twist drill (to M12), hand taps from HSS, mounting

spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.

Inside roof lining adhesive from Teroson. Contents: 680g. Light, transparent adhesive material for

the roof and door linings.

Roll Pin Assortment, 450 pcs. Diameter from 2 > 10mm, lenght 5>50mm.

Cavity preservation on wax basis, for cavity pistol, 1 litre.

• Suitable for this article
• 
  Underbody coating nozzle (gun) + cavity preservation nozzle (gun), for 1 liter
  26,68 €

Body cavity protection spray, 500 ml. Inclusive hollow space probe

• Suitable for this article

Cavity probe (60cm) for fluid film spray can (21127)

Hone segment 100x10mm (3 fittings) for engine cylinder hone 20918.

Hone segment 30x4mm (2 fittings) for brake cylinder hone 20916.

Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +

800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.

Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European

Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.

Horn, 12V. Universal fitting.