intake and exhaust manifold for Alle 504-604

Exhaust elbow seal (fuel engines) suitable for Peugeot 403, 404, 504, 505, J5, J7, J9, Citroen C25

Or. No. 0349.03

Exhaust, elbow tubing sealing ring. Suitable for Peugeot 204, of year of construction 1967 to 1975

(engine XK + XK4). Peugeot 304, of year of construction 1969 to 1975 (engine: XL3, XL3S, XL5). For 204 + 304 the seal 1x is required. Peugeot 504 V6 (Cabrio + Coupe) + 604 V6. For 504 and 604 the seal 2x is required. Dimension: 41.5 x 55mm. Or. No. 1710.11

Flange gasket for the exhaust pot at the exhaust elbow. Suitable for Peugeot 204 + 304, of year of

construction 1967 to 1975 (engine: XK, XK4, XL3, XL3S, XL5). Peugeot 404, Peugeot 504. Inside diameter: 42mm. Or. No. 1721.01

Y-pipe seal doubles (fusion two in one pipe to the exhaust elbow). Heavy one: 1,0mm. Bore diameter

for each 36,5mm. Suitable for Peugeot 204, Peugeot 304 (engine XL5 + XK5). Peugeot 404, 504, 505, J5, J7. Or. No. 1710.09

M10, copper nut (wrench 15mm) for connection Y-pipe (elbow pipe) at the exhaust elbow. Suitable for

Peugeot 204, 304, 404, 504, 505, 604, J7

copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper

nuts: no rust, no sticking!

M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.

M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.

M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).

P 404/504/604, elbow tubing seal above (fusion exhaust pipe to the exhaust elbow). Suitable for

Peugeot 404. Peugeot 504, J7. Peugeot 604, starting from serial number 655429 (for 604, you need 2 pieces). Outside diameter: 57mm. Inside diameter: 43mm. Or. No. 1710.07

P 504 V6, elbow tubing seal in front, suitable for Peugeot 504 Cabrio V6 + Coupe V6. 57mm outside

diameter. Or. No. 1710.07

P 504 V6/R30, intake manifold seal, for Peugeot 504 V6, 604 V6. Renault R30, Alpine A310 V6

(Rubber seal). Outside diameter: 54,5mm. Inside diameter: 45mm. Or. No. 0348.24

P 504, inlet rubber (4 fittings) intake manifold. Suitable for Peugeot 504 Injection. (4 liners)

Inside diameter: about 43mm. Overall height: 42mm. Made one in Germany!

P 504, intake manifold seal for Peugeot 504. 1,8L + 2,0L. Carburetor + injection engines. Installed

from year of construction 07/1968 to 08/1984. Or. No. 0348.18

P 504/505, Y-pipe seal. Suitable for Peugeot 504 + 505. Or. No. 1710.24 + 1710.37 + 1710.96

P 504/505/J5/C25, intake manifold seal for Peugeot 504, 505, J5. Citroen C25. Engines: Petrol

carburetor + injection engines. 1,8L + 2,0L. Engine code 169 (XM7T). Or. No. 0348.33

P 504/505/J7/HY, exhaust elbow seal, suitable for Indenor Diesel XDP88. Bore 94mm. Suitable for

Citroen HY Diesel. Peugeot 504D, 505D, J7D, J9D. Inside diameter: 40 x 30mm. Bore diameter: 9mm. Bore distance from center to center: 64mm.

P 504/505/J7/HY, intake manifold seal for Indenor Diesel XDP88. Bore 94mm. Suitable for Citroen HY

Diesel. Peugeot 504D, 505D, J7D, J9D.

P 504/604/R30, exhaust elbow seal. Suitable for Peugeot 504 V6 + 604 V6. Renault R30 + Alpine A310

V6. Inside diameter: 3 x 35mm. Bore diameter: 12 x 8,0mm + 3 x 9,0mm. Or. No. 0349.28

P 504/604/R30, intake manifold seal. Suitable for Peugeot 504 V6, 604 V6. Renault R30 + Alpine A310

V6. Or. No. 0348.25

Stud bolt M7 on M8. 45mm lengths. Special production!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

M7, stud bolt M7x28. (e.g. screening plate on manifold Citroen DS). Or. No. ZC9616135W

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow

with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Stud bolt M8 on M10. 38mm lengths. Special production!

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €
• 
  M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts +
  0,88 €

stud bolt M8x35

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

Stud bolt M8x45, e.g. elbow securement Citroen DS.

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x55

• Suitable for this article
• 
  M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.
  0,94 €

stud bolt M8x62