Hose air circulation for the disc brake in front. Suitable for bad copied, French air circulations
(not suitable for our number 13020 + 13021). Citroen 2CV. 35mm inside diameter, 250mm long.
for Alle ACDY
1678 Articles | Page 27 of 34
Hose air circulation, for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari
Reproduction. Inside diameter: 38mm. Length: 250mm.
Hose air circulation for the disc brake in front. Suitable for Citroen 2CV6, Dyane, Mehari
Accurate reproduction from synthetic, as the original hoses. Inside diameter 40-42mm, length 235mm.
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Rear mud flaps (left + right) with Citroen logo. These mud flaps can be universally installed
(Citroen 2CV, Dyane, Mehari, DS, AMI, etc.). Dimensions approx.: 22 cm wide, 25 cm high. The mud flaps have different mounting holes. This allows the mounting height to be adjusted. The mud flaps are of good quality. The brackets for mounting must be made yourself! (There's always something).
Screw for the driving shaft to the drive shaft. Gearbox side Installed. Suitable for Citroen for
2CV to year of construction 1971. Or.Nr.: AM451-94A
Screw for the securement of the speedometer cable in the gearbox. (M7x50mm). Suitable for Citroen
2CV, Dyane, Ami, Mehari.
M6x12 screw. Securement clutch pressure plate (3 finger clutch) on the fly wheel. Suitable for
Citroen 2CV6 + 2CV4, to year of construction 1981.
M7 x 25 screw. For the securement of the intake manifold on the cylinder head. Suitable for Citroen
2CV6. Or. No. ZD 9372 000W
M7x16 screw + spring washer. Clutch pressure plate (disks clutch) on the fly wheel. Suitable for
r Citroen 2CV6, starting from year of construction 1981.
Screws for the carburetor cap. Suitable for Citroen 2CV with oval carburetor. (6 fittings). The
screws correspond optically to the original screws.
Screw set M5-M8 galvanizes. Consisting of: 20x M5x20, 15x M5x30, 25x M6x16, 20x M6x20, 12x M6x25
8x M6x30, 10x M7x20, 8x M7x30, 15x M8x20, 10x M8x30, 8x M8x40. Altogether 151 screws in a clear synthetic box.
Screw-safety-paint, yellow, 20ml bottle including brush. This paint to be fit as sealing and
marking paint and can be directly brought onto the spot which has to be marked.Standart product in the 60´s for marking on gearboxes, engines, hydraulic parts and chassis parts
Heat shrink tubing (kit from 100). These handy sheaths form a protective water resistant insulation
over exposed wiring and electrical connections. Designed for automotive use. Supplied in a plastic organiser.
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Float in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above: 37mm, down: 25mm
float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Radius arm bearing for Citroen 2CV. Good reproduction. The radius arm bearings are identically
constructed over the total construction period (also for Dyane, AK, AMI, Mehari). They fit for the front axle and for the rear axle. Dimensions: 63.5 x 95 x 17 mm. Or. No. ZC 9620041U
Radius arm bearing set, suitable for Citroen 2CV, Dyane, Ami. Consisting of: 4x radius arm bearing
4x shaft seal radius arm bearing, 2x split pin for radius arm nut.
Radius arm bearing locknut, suitable for Citroen 2CV, Dyane, AK, Mehari, AMI. Measurement: 63 x
150mm. Or. No. AZ414-90
Radius arm bearing shaft seal, suitable for Citroen 2CV. The shaft seal renews the felt washer
Suitable for all year of construction and all series. (2CV, AK, AZU, ACDY, Dyane, AMI). Measurement: 72 x 95,6 x 7mm. Made in Germany.
Flywheel screw M8x1, lenght aboaut 28mm. Suitable for Citroen 2CV starting from 1967. Reproduction
per piece. Note: Flywheel screws are necked-down bolts and should be always changed, if it released.
Fly wheel, bearing in the fly wheel. Mounting (guide) for the primary shaft. Suitable for Citroen
2CV. Inside diameter: 12mm, outside diameter: 18mm, height: 18mm.
Flywheel / crankshaft, bearing in the flywheel. Mounting (guide) for the primary shaft. Suitable
for Citroen 2CV4 + 2CV6, up to year of construction 02/1972. Design = needle bearing. Inner diameter: 12mm, outer diameter: 18mm, height: 10mm. Or. No. ZC9620 322U
1678 Articles | Page 27 of 34
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
