for Alle Panhard
527 Articles | Page 4 of 11
Tap UNF 3/8 x 24 (single-cut tap). The thread is often found on brake parts such as wheel brake
cylinders, master brake cylinders, brake hoses.
Screw gauge metric + Whitworth. Angle of pressure 60° with 24 upward gradients 0,25-6mm. Angle of
f pressure 55° with upward gradients 4-62 gear on 1 ".
Bulb 12 V, H1, 55 W, in clear!!! E.G. Citroen DS, Peugeot 504 Cabrio.
PDF FILE - Suitable for this article
Bulb 6 V, 45/40 Watt. in yellow!! Base with 3 pins, base Ba21d. 2CV early years of construction
11CV, Renault + other French vehicles.
Rubber cap for the connection to the starter motor. (Protecting cap). This cap should never be
missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm.
Rubber cap for the connection at the generator. (Protecting cap). This cap should never be missing
Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.
Hook set, 135 mm long. 4 pieces, ideal for removing O-rings, seals, Citroën brake line seals, etc
Contents: 1x straight tip, 1x 90° tip, 1x hook tip, 1x piercing tool.
Thread Repair Kit M7x1, for repairing damaged threads. For plating threads in materials with low
shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.
Inside roof lining adhesive from Teroson. Contents: 680g. Light, transparent adhesive material for
the roof and door linings.
Horn (12 V), completely with air compressor + 2 x compressed air horn, relay and air hoses. 750 +
800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.
Horn (trumpet) 12 V, high tone. 480Hz, 108dB (A). Very high quality horn, made in the European
Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.
Horn (trumpet) 12 V, deep tone. 420Hz, 108dB (A). Very high-quality horn, made in the European
Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.
Horn 12 V, high tone. 430Hz, 114dB (A). Very high quality horn, made in the European Union. The
horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.
Horn 12 V, deep tone. 340Hz, 114dB (A). Very high quality horn, made in the European Union. The
horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.
Horn set (2 pieces) chrom-plated, from Bosch. Frequencies: 325 and 400 Hertz. Volume: 118 db(A)
operating voltage: 12 V, power consumption: 48 W each, diameter: 156 mm, depth: 91 mm, EMV protection: included. Universal fitting.
Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all
flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.
Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
527 Articles | Page 4 of 11
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
