Citroen-2CV / 204 + 304 / crankshaft-camshaft-piston-flywheel

P 104/204/304, shaft seal differential on the left. Suitable for Peugeot 104, 204, 304, 305, 205. Suitable for all fuel + Diesel engines. Dimension:: 40 x 58 x 10mm. Or. No. 3121.09

Quality: 3

P 204, Main bearing (crankshaft bearing), 0.30 oversize. Suitable for Peugeot 204 up to year of construction 01/1968. Engine: XK5 (1130cc)

Quality: 2

P 204, Main bearing (crankshaft bearing), 0.50 oversize. Suitable for Peugeot 204 up to year of construction 01/1968. Engine: XK5 (1130cc)

Quality: 2

P 204, Main bearing (crankshaft bearing), standard size. Fits Peugeot 204 up to year of construction 01/1968. Engine: XK5 (1130cc)

Quality: 2

P 204, pistons + liner (1 item). Suitable for Peugeot 204, of year of construction 1965 to 1967 (first generation). Engine: XK. Compression: 8,8: 1. Engine capacity: 1130cc. Bulge from above: 7mm. Bore: 75mm. Piston pin: 20,5mm. Piston rings: 2.0 + 2,0 + 4.5mm. 53HP. The engine block is shared!

Quality: 2

• Suitable for this article
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 204, pistons + liner (per piece). Suitable for Peuggeot 204, starting from year of construction 1968. Engine: XK4. Compression: 8,8: 1. Engine capacity: 1130cc. Bore: 75mm. 55HP. The engine block is one-piece!

Quality: 2

• Suitable for this article
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 204/304, check disk for the crankshaft. Suitable for Peugeot 204 (engine XK + XK4). Peugeot 304 (engine XL3 + XL3S).

Quality: 2

P 204/304, main bearing (crankshaft bearing) 0.30 oversize (for journals 47.00 to 46.984mm). Fits Peugeot 204 from 01/1968 (engine XK4). Peugeot 304 with engine XL3, XL3S. Or. No. 0113.02

Quality: 3 360°

P 204/304, main bearing (crankshaft bearing) 0.50 oversize (for journals 47.00 to 46.984mm). Fits Peugeot 204 from 01/1968 (engine XK4). Peugeot 304 with engine XL3, XL3S. Or. No. 0113.03

Quality: 3

P 204/304, main bearing (crankshaft bearing) standard size (for journals 47.00 to 46.984mm). Fits Peugeot 204 from 01/1968 (engine XK4). Peugeot 304 with engine XL3, XL3S. Or. No. 0113.01

Quality: 3

P 204/304, connecting rod bearing (complete set), standard dimension. Suitable for Peugeot 204 + 304. Engine: XL5 + XL6. Wide one: 19,75mm.

Quality: 3

P 204/304, connecting rod bearing, 0.30 oversize. Suitable for Peugeot 204 + 304. Engine XK5 1130cc, XL5/S 1290cc. Wide one: 19,6mm

Quality: 2

P 204/304, connecting rod bearing, 0.50 oversize. Suitable for Peugeot 204 + 304. Engine XK5 1130cc, XL5/S 1290cc. Wide one: 19,6mm

Quality: 2

P 204/304, connecting rod bearing, standard dimension. Suitable for Peugeot 204 + 304. Engine XK5 1130cc, XL5/S 1290cc. Wide one: 19,6mm

Quality: 2

P 204/304/305, bottom liner seal (4x). Suitable for Peugeot 204, 304, 305. Only for XL5, XK5, XR5, XR5S engines.

Quality: 3

P 204/304/305, shaft seal 40 x 49.5 x 5,5-7mm, for the crankshaft at the front side. Suitable for Peugeot 204, 304, 305. For engine: XK5. Or. No. 2074.07

Quality: 2

P 304, pistons + liner (4 item). Suitable for Peugeot 304, 304S, starting from year of construction 10/1976. Engine: XL5/S. Compression: 8,8: 1. Engine capacity: 1290cc. Bore: 78mm. Piston pin: 20.50 x 68mm. Piston height: 72,0mm. Overall height of liners: 173,0mm. Piston rings: 1,75 + 2.0 + 4,0mm. Height top of cylinder to the cylinder liner seal in the engine block: 129mm. The piston crown is flat with a small groove!

Quality: 3

• Suitable for this article
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 304, pistons + liner (4 pieces). Suitable for Peugeot 304, of year of construction 09/1970 to 10/1975. Peugeot 304S, of year of construction 09/1972 to 10/1975. Engine XL3 XL3S, second generation. Bore: 76mm. Engine capacity: 1288cc. Piston rings: 1,75 + 2.0 + 4,0mm. Piston height: 73,5mm. Piston pin: 20.5 x 63mm. Height of liner totally: 128,00mm.

Quality: 3

• Suitable for this article
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 304, pistons + liner (4 pieces). Suitable for Peugeot 304, of year of construction 1968 to 07/1971. Engine XL3 (65 HP), first generation. Compression: 8,8: 1. Bore: 76mm. Engine capacity: 1288cc. Piston rings: 1,75 + 2.0 + 4,0mm. Piston height: 72,0mm. Piston pin: 20,55 x 63mm. Height of liner totally: 128,30mm.

Quality: 3

• Suitable for this article
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 304, piston rings, for 4 pistons. Suitable for Peugeot 304. Engine: XL5/S. Compression: 8,8: 1. Bore: 78mm. Piston rings: 1,75 + 2.0 + 4,00mm.

Quality: 3

• Suitable for this article
• piston ring presenting pliers for diameter 40-100.
  20,73 €
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

P 304, connecting rod bearing 0.3 oversize. Suitable for Peugeot 304 with engine XL3, XL3S, XL, XK1, XK2. Wide 21,4mm. For diameter 44,7mm. Or. No. 0608.44

Quality: 3 360°

P 304, connecting rod bearing 0.5 oversize. Suitable for Peugeot 304 with engine XL3, XL3S, XL, XK1, XK2. Wide 21,4mm. For diameter 44,5mm.

Quality: 3

P 304, connecting rod bearing standard. Suitable for Peugeot 304 with engine XL3, XL3S, XL, XK1, XK2. Wide 21,4mm. Diameter 45mm. Or. No. 0605.43

Quality: 3

P 304, liner (4 pieces). Suitable for Peugeot 304 (75HP). Engine: XL3S. Compression: 8,8: 1. Engine capacity: 1288cc. Bore: 76,0mm. Outside diameter: 89.000 mm. Length over everything: 128,30mm.

Quality: 2

• Suitable for this article
• Piston ring compressor, 60 to 90mm clamping range. Hobby version (not for daily work).
  16,76 €

Shaft seal crankshaft (front side). Suitable for Peugeot 204 D, 304D (1,4L), 404D, 504D, J7D, J9D, Talbot express Diesel. Dimension: 42 x 60 x 8mm. Or. No. 0514.11

Quality: 3

Camshaft drive chain, 90 chain links (duplex, double chain). Suitable for Peugeot 204 (1,1L), of year of construction 1965 to 1969. Peugeot 504 (1,8L petrol + 2.3 Diesel). Peugeot 505 (2,3D + 2,5D + TD), 604 (2,3TD + 2,5TD). J7 + J9 (2,3D + 2,5D). Brand manufacturer. Or. No. 0816.21

Quality: 2

Camshaft drive chain, 92 chain links (simplex). Suitable for Peugeot 304 (1290cc, 65HP), of year of construction 1972 to 10/1079. Peugeot 305 (1472cc), of year of construction 05/1980 to 08/1985. Or. No. 0816.14

Quality: 2

Camshaft drive chain, suitable for Peugeot 204 (engine XK4) and 304S (engine XL3S). Simplex, 90 chain links. Branded article. Or. No. 0816.11.

Quality: 2

Camshaft drive chains gear wheel. Suitable for Peugeot 304, 304S, 305. Number of teeth: 38. For simplex camshaft drive chain. Branded article! Or. No. 0805.13.

Quality: 2

Plug screw in the crankshaft. Dimension: M24 x 1,5. Suitable for Peugeot 204, 304, 305, 404, 504, 505. Or. No. 0507.06

Quality: 3