front axle for Citroën 11CV-15CV

4CV/Dauphine/Floride, bonded-rubber bushing for the kingpin. Suitable for Renault 4CV, Dauphine

Floride, Caravelle, Juvaquatre. Peugeot 201, 302, 402. Citroen C4, C6, Rosalie. Dimension: 12 x 26 x 36 x 32mm. Per piece. Or. No. 8535735

Axle (inclusive bonded-rubber bushings) for a-arm. Suitable for Citroen 11CV. Dimension: 22 x 264mm

Stop buffer, for the lower support arm. Suitable for Citroen 15CV. Or. No. 441173

Distance disk 0,5mm, torsion bar (axle supension). Suitable for Citroen HY + 15CV. Or. No

ZC9426905U + 426905

Adjusting nut for the lower ball pin at the wheel hub. Suitable for Citroen HY + 11CV. Thread: 40 x

150. Or. No. ZC 9441 190U + 441190. Made in Europe.

Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.

• Suitable for this article
• 
  Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• 
  Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!
  41,56 €
• 
  Lubricating gun small, 120cc. Optimally for on the way and difficult attainable
  20,73 €

Molybdenum universal grease in tube, 100g. High performance rolling bearing grease for lubricating

wheel bearings, cardan joints etc.

• Suitable for this article
• 
  Lubricating gun small, 120cc. Optimally for on the way and difficult attainable
  20,73 €

Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy duty roller bearing

grease for lubricating universal joints etc.. By the high proportion of Molykote is this grease also outstanding suitable for lubricating sliding fits from cardan shaft`s, ... Water-rejecting! Caution not for high-speed bearings (wheel bearings).

• Suitable for this article
• 
  Grease gun, for lubricating grease cartridge. Hobby quality!
  23,71 €
• 
  Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!
  41,56 €
• 
  Lubricating gun small, 120cc. Optimally for on the way and difficult attainable
  20,73 €

Grease cap from rubber, for the pin holder at the front axle. Suitable for Citroen 11CV. Diameter

76,0mm. Or. No. 426618

Grease cap securement spring, for the pin holder of the front axle. Suitable for Citroen 11CV

Dimension: 63 x 69 x 3mm. Or. No. 426623

Grease gun, for lubricating grease cartridge. Hobby quality!

• Suitable for this article
• 
  Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• 
  Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy
  8,32 €
• 
  Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red
  7,93 €

Grease gun, for lubricating grease cartridge. Workshop quality from Liqui Moly!

• Suitable for this article
• 
  Multi-purpose grease, cartridge 400g, suitable for our lubricating gun.
  6,34 €
• 
  Molykote grease in cartouche for lubricating gun. 400g (graphite grease). Heavy
  8,32 €
• 
  Lubricating grease, color red, 400g cartouche. Original one by TOTAL! Red
  7,93 €

Rubber buffer for the lower crossbar. Suitable for Citroen 11CV. Dimension: 62 x 40mm. Or. No

426664

Rubber plug for the axle suspension. Suitable for Citroen 11CV + 15CV. Dimension: 22 x 17.5 x

21,5mm. Or. No. 309810

Crown nut M12 x 1,75. Suitable for the steering arm + tie rod. Citroen 11CV + 15CV.

Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U

Ball pin repair set down. Suitable for Citroen 15CV + Citroen HY. Length: 105mm. Or. No. 441177 +

ZC9441177U

• Suitable for this article
• 
  Crown nut M18x1,5. Low design. E.G. for ball pin Citroen HY. Or. No. ZC9441 178U
  2,88 €
• 
  Dust cap for ball pin. Suitable for Citroen HY. Or. No. ZC9427050U
  22,90 €
• 
  Locking plate, for a ball joint at the front axle. Suitable for Citroen HY. Or
  2,82 €

Ball cup completely above. (Wheel suspension). Fixture for the upper pin of the wheel hub. Suitable

for Citroen 11CV. Diameter: 52mm. Or. No. 426607

Ball cup down (front axle). Suitable for Citroen 11CV. Diameter: 60mm. Or. No. 426613

Nut for the upper pin holder, at the front axle. Suitable for Citroen 11CV. Measurement: M16 x 1,5

Or.Nr.426531

Upper wishbone: Axle (with guide sleeve + nut), for the upper support arm of the front axle. Axle

dimensions: 263 x 36mm. Suitable for Citroen HY + 15CV. Or. No. ZC9427082U + ZC9426959U + ZC9427082U. Made in Europe

Upper wishbone: Sleeve for axle, for the upper support arms of the front axle. Sleeve dimensions

36.5 x 40 x 126mm. Suitable for Citroen HY + 15CV. Or. No. ZC9426959U. Made in Europe

Lubricate nipple with M7 thread. Suitable for Citroen 2CV, DS, 11CV, HY, etc.

• Suitable for this article
• 
  Lubrication nipple cap from synthetic. Color: Red.
  1,44 €

Lubrication nipple M8 x 1,25. (Taper lubrication nipple H1, straight). Wrench: 9,0mm.

• Suitable for this article
• 
  Lubrication nipple cap from synthetic. Color: Red.
  1,44 €

Screw for the front axle securement. Suitable for Citroen 11CV. Measurement: M10 x 175. Or.Nr

308453

Locking plate for the front axle securement. Suitable for Citroen 11CV. Or.Nr. 308259. Made in

Germany.

Silent block for the upper support arm. Suitable for Citroen 15CV. Dimension: 56 x 38 x 36 x 47mm

Or. No. 441433

Tie rod pin set (for 1 side). Suitable for Citroen 11CV. Dimension: 25 x 78mm. Or. No. 601876 +

601846

Tool for the ball pin down (front axle). Citroen No: 1855-T. Suitable for Citroen HY + 15CV.