for Citroën DS

Box nut M7 (casing nut 14 x 14mm). Suitable for Citroen 2CV (in front at the original chassis

Fixture head light bracket - bumper mounting bracket)

M7, cover for bolt heath.

M7 welding nut (DIN929). Per piece

M7 weld nut (spot weld nut), like original! Suitable for Ctroen 2CV, DS, HY

M7 die nut (male thread cutter). Lead of thread 0,75. Workshop quality

M7 x 1,00 male thread cutter (die nut M9x1,25)

Spring washer M7 high-grade steel

Spring washer M7

copper nut M7 for exhaust system ! For exhaust system and outlet manifold. Please use only copper

nuts: no rust, no sticking!

Brass nut, M7! DIN 934.

Nut, high-grade steel, M7

Nut M7, galvanized

Nut M7, galvanised, 12mm wrench size!

Self-locking nut M7

M7, self-locking nut, yellow galvanised!

M7, stud bolt for 2CV, DS, R4. Measurement: 38mm. (e.g. elbow spider on cylinder head 2CV).

• Suitable for this article
• 
  copper nut M7 for exhaust system ! For exhaust system and outlet manifold
  1,46 €

Washer, M7

M7, washer largely, 7,5x22mm, 2mm heavily.

M7, washer largely, from high-grade steel, 7,5x21,5mm, 2mm heavily.

M7, washer, diameter 50mm. For the securement of the body on the tank bow. Suitable for Citroen

2CV. Made in Germany.

Washers corrugated M7x14 (French name: Striees). Content: 70 units. These grooved washers were

original Installed at French vehicles!

Washer corrugated M7x14 (French name: Striees). Content: 1 piece. These grooved washers were

original Installed at French vehicles!

Washer corrugated M7x18 (French name: Striees). Content: 45 units. These grooved washers were

e original Installed at French vehicles!

Washer corrugated M7x18 (French name: Striees). Content: 1 piece. These grooved washers were

original Installed at French vehicles!

Toothed washer M7 galvanized

M7x100, 8.8 / screw galvanizes.

• Suitable for this article
• 
  Toothed washer M7 galvanized
  0,25 €
• 
  Nut M7, galvanised, 12mm wrench size!
  0,64 €

Screw M7x12, e.g. to fix the steeringwheel 2cv, screw is galvanized

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Slotted counter-sunk screw M7x12.

M7x12. Countersunk screw 7mm, with flat bolt head! Material: High-grade steel. The bolt head has

about 12mm diameter! E.G. suitable for the door lock wedges (Citroen 11CV).

Screw Torx, M7x16. Content: 30 units.

Screw M7x16 galvanized

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

M7x17, female hexagon screw M7x17mm.

Slotted counter-sunk screw M7x20.

Screw M7x20, galvanized

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

M7x25 / screw high-grade steel, hexagonal 12mm. Flat bolt head

Screw M7x25.

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x30, galvanized

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x35

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x40, galvanized, to fix the gearbox holder on front axle

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x45

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

M7x50 / screw with shaft. E.g. fastening steering column to steering gear on Citroen 2CV (screw for

the steering tube clamp).

M7x50 / screw galvanised. Continuous thread.

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

Screw M7x80, e.g. to for lamp tree 2cv on chassis

• Suitable for this article
• 
  Nut M7, galvanized
  0,18 €

M8, copper nut M8, for 13mm tool. Universal suitable e.g. for exhausts + exhaust manifolds.

M8, copper nut, for 12mm open end wrench. For exhausts + exhaust manifolds.

M8, nut for 12mm wrenche. (Metal) (e.g. carburetor on intake manifold 2CV).

M8, nut for 14mm wrenche. (Metal) (e.g. caliper Renault Caravelle, R8, Alpine110...).

Washers corrugated M8x18 (French name. Striees). Content: 45 units. These grooved washers were

original Installed at French vehicles!

Washers corrugated M8x22 (French name: Striees). Content: 25 units. These grooved washers were

original Installed at French vehicles!

M8x20, hexagon socket screw (female hexagon) M8x20mm. Suitable for Citroen DS clutch pressure

plate, starting from year of construction 7/1972.