for Peugeot 203-403
1195 Articles | Page 18 of 24
P 403/404, master brake cylinder. Piston diameter: 22mm. Brake line connector: 1/2 x 20 UNF. Brake
fluid reservoir thread: about: M19 x 1,5. Suitable for Peugeot 403, starting from year of construction 10/1960. Peugeot 404, starting from year of construction 07/1960. Not suitable for Thermostable brakes. Or. No. 460112. Made in Europe.
P 403/404, master brake cylinder. Suitable for Peugeot 403 + 404. Piston diameter: 17,46mm (11/16)
Thread brake fluid reservoir: 19mm.
P 403/404, crankshaft bearing, 0.8 oversize. Suitable for Peugeot 404, of year of construction 1961
to 1964 (starting from engine 4036261, 3 crankshaft bearings, 1618cc). Peugeot of 403, final years of construction.
P 403/404, air cleaner element round, for Peugeot 403 + 404. Height of 125mm, outside diameter
110mm, inside diameter 67mm.
P 403/404, clutch disk for Peugeot 403 Diesel + 404 Diesel to year of construction 1967. For
engine: XDP85. Dimension: 200 x 30 x 10mm. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
PDF FILE P 403/404, clutch disk. Suitable for Peugeot 403, of year of construction 1956 to 1964. Peugeot
404, of year of construction 1960 to 1967. Diameter: 215mm, 30x25x10. Teeth: 10. Lining thickness: 7,9mm. Or. No. 2054,16 + 2054.21. Note: adjust the clutch free travel! Peugeot work instruction 2/0101 0102 + 2/0201 + 2/0401 > 0405.
Wheel brake cylinder rear left, for Peugeot 403 and 404, piston:15/16 inch,(23,81mm). Connector 3/8
x 24UNF. Or.Nr. 440226. Made in Europe.
Wheel brake cylinder rear right. for Peugeot 403 and 404, piston:15/16 inch,(23,81mm). Connector
3/8 x 24UNF. Or.Nr. 440227. Made in Europe.
P 403/404, wheel brake cylinder with 1 piston 30mm,brake line connector 3/8 x 24UNF (9,5mm),403 Bj
1961->, 404, 404 Comercial, 404 Pick UP. Mounting board bore 21,5mm, , length over all 63,5mm. Made in Europe.
wheel brake cylinder repair set front 403+404 with 1,1/8 inch piston till model changing 1965
Themostable brakes came
P 403/404, wheel brake cylinder in front. 1 piston (30mm). Brake line connector: 7/16 x 20 UNF (E
Flanging). Suitable for Peugeot 403 + 404 (starting from year of construction 1965). Mounting board bore 22mm. Length over all 65mm. Or. No. 4401-20. Made in France
P 403/404, wheel brake cylinder in front. Fits on the left + on the right. Suitable for Peugeot 403
(7-D-BD-U-L). Peugeot 404B + Coupe. Piston diameter: 28.57 mm. Brake line connector: 7/16 x 20UNF. Mounting board bore: 22mm. Or. No. 4401.14. Installed on vehicles, before year of construction 10/1964! Made in France
P 403/404, carburetor Solex 34BICSA (no reproduction). Carburetor diameter: 34mm. Suitable for
Peugeot 403, 404, J7, J9. Original SOLEX carburetor, no reproduction. Or. No. Solex: 13550 000. Or. No. Peugeot: 1401.93
P 403/404, carburetor Solex 34BICSA12 (no reproduction). Carburetor diameter: 34mm. Suitable for
Peugeot 403, 404, J7, J9. Original SOLEX carburetor, no reproduction. Or. No. Solex: 13549 000. Or. No. Peugeot: 1401.66
Starter lock (in the dashboard), suitable for Peugeot 403 + 404 (first version). 3x connection
Case diameter: 39mm. Lockbolt: 8x13 mm. Case high over everything: 64 mm (without cable connections)
Guide sleeve for the horn actuation rod in the steering column. Suitable for Peugeot 403, 404
partly 504. Material Celaron. 2,7x6x15mm. Or. No. 626305
P 403/404/504, fan blades for Peugeot 403 + Peugeot 404, Peugeot 504 TI 2.0L (with very minor
modifications). Reproduction made of plastic! Outer diameter: 325mm. Diameter for the mount on the water pump: approx. 104mm. Height: 43mm.
P 403/404/504, wheel bearing set rear. Suitable for Peugeot 403, of year of construction 1958 to
1966. Peugeot 404 (sedan, Cabriolet + Coupe) of year of construction 1960 to 1975. Peugeot 504 (sedan, Cabrio + Coupe) starting from year of construction 1973. Outside diameter: 72,0mm. Inside diameter: 35,0mm. Overall height: 17,0mm.
P 403/404/504, bonded-rubber bushing mounting plate spring at the rear axle, Peugeot 403, Peugeot
404 + 404 Pick UP, Peugeot 504 Pick UP. Measurements inside 16mm, outside 32mm. Length inside 54mm, outside 50mm
P 403/404/504, shock absorber rear (2 fittings). Suitable for Peugeot 403 Pick Up, 404 Pick UP +
504 Pick UP. Length over everything: 415mm (compressed) + 650mm (pulled apart). Inside diameter bonded-rubber bushing: 13,4mm. Diameter shock absorber: 50mm.
P 403/404/504/505, gearbox bearing BA7/4 + Ba/5 gearbox. Fits primary shaft on engine side
Secondary shaft2, opposite engine (rear). Intermediate shaft 1, engine side. For Peugeot 404, Peugeot 504, Peugeot 403, Peugeot 505. Outer diameter:: 75mm. Inner diameter:: 35mm, Overall height: 20mm. The bearing has a groove on the outer ring. Or. No. 2308.10
P 403/404/504/505, bearing for the jackshaft, rear (gearbox BA7). Suitable for Peugeot 403, Peugeot
404, Peugeot 504, Peugeot 505. Outside diameter: 47mm. Inside diameter: 21,5mm. Overall height: 16.25 mm. Or. No. 2372.11
P 403/404/504/J7, brake hose rear, suitable for Peugeot 403, 404, 504, J7. Overall length 480mm
Connections both sides: Male thread 5/8 x 24UNF, female thread 3/8 x 24 UNF. Or.Nr. 445116 + 481607. Made in Europe.
P 403/404/DS, H4 headlight insert. Version CIBIE. Suitable for Peugeot 403 + 404. Citroen DS, to
year of construction 1967. 180mm diameter. The headlamp has 2x securement + 2x bracket. Mounting for H4 bulb, thereby substantially better light! Reproduction without approvals!
P 403/404/DS, H4 headlight insert. Version DUCELLIER. Suitable for Peugeot 403 + 404. Citroen DS
to year of construction 1967. 180mm diameter. The headlamp has 3x securement. Mounting for H4 bulb, thereby substantially better light! Reproduction without approvals!
P 403/404/DS, H4 headlight insert. Version MARCHAL. Suitable for Peugeot 403 + 404. Citroen DS, to
year of construction 1967. 180mm diameter. The headlamp has 3x securement + 1x bracket. Mounting for H4 bulb, thereby substantially better light! Reproduction without approvals!
P 403/404/DS, headlight insert (NOS). Ducellier design. Suitable for Peugeot 403 + 404. Citroen DS
up to year of construction 1967. 180 mm diameter. Holder for a double filament bulb. Please note: These are original headlights from the manufacturer CIELCO in Spain. Found in a warehouse clearance (new old stock). The headlights have a test mark!
P 403/404/DS, sheet metal headlight housing for Marchal headlights. Suitable for Peugeot 404. This
headlight housing can also be used with minor modifications for Peugeot 403 and Citroen DS (old front).
P 403/404/J7, rear brake hose. Suitable for Peugeot 404 up to the year of construction 1966
Peugeot 403 second model. J7 first model. 5/8 UNF male thread. 7/16 UNF female thread. Length 485mm.
P 403/404/J7, piston + liner (4 pieces). Suitable for Peugeot 403 (8CV), of year of construction
1955 to 1961. Peugeot 404 U6 Commerciale (8CV). Peugeot J7 B 1400kg. Engine capacity: 1468cc. Bore: 80,0mm. Piston pin: 22 x 67mm. Piston rings: 2,0 + 2.0 + 4.5 + 4,5mm (4 coils). Overall length of the liners: 140mm
P 403/404/Simca, wheel brake cylinder rear. Suitable for Peugeot 403, of year of construction
5/1958 to 1965. Peugeot 404 to year of construction 10/1965. Simca Aronde. Piston diameter: 25,4mm. Brake line connector: 3/8 x 24 UNF. Mounting board bore: 36mm. Length over everything: 72mm. Or.Nr. 440215. Made in Europe.
P 403/404/Simca, wheel brake cylinder rear. Suitable for Peugeot 403, of year of construction
5/1958 to 1965. Peugeot 404 to year of construction 10/1965. Simca Aronde. Piston diameter: 25,4mm. Brake line connector: 7/16 x 20. Mounting board bore: 36mm. Length over everything: 72mm. Flanging type "E" Made in Spain.
P 403D/404/J7/HY, piston (1 piece), suitable for Citroen HY Diesel. Peugeot 403 D, 404 D, Peugeot
J7 Diesel. For engine: XDP 85. Engine capacity: 1816cc. Bore: 85mm.
P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel, Peugeot J7 Diesel
Citroen HY Diesel. For engine: XD85, XDP85, TMD85. Engine capacity: 1816ccm. Bore: 85mm. Dimensions of the liner = outside diameter down: 93mm.
P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel, Peugeot J7 Diesel
Citroen HY Diesel. For engine: XD85, XDP85, TMD85. Engine capacity: 1816ccm. Bore: 85mm. Dimensions of the liner = outside diameter down: 96mm.
P 404, brake hose in front, suitable for Peuegot 404 with brake assistance to year of construction
1966. Length: 354mm. Thread: 3/8 x of 24 male threads, 3/8 x of 24 female threads + 5/8 x of 18 male threads. Suitable for vehicles with 4,5mm brake hose. Made in Spain. Note : 404 without Hydrovac all had 7/16" until about 1966. The new lines with 3/8" thread appeared with the Hydrovac.
1195 Articles | Page 18 of 24
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
