Plug screw M22x1,5. This screw is used as drain plug for the radiator, partly as threaded plugs at
the water pump or in the cylinder head. Also as filler plug for the gearbox. Suitable for Peugeot 203, 403, 204, 404, 504, 505. Or. No. 0243.06
for Peugeot 203-403
1196 Articles | Page 24 of 24
Hazard warning lights switch 12 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14425.
- Suitable for this article
Hazard warning lights switch 6 Volt! Manufacturer Bosch! The hazard flasher system uses the
existing flasher relay and is relatively easy to install. Attention: a suitable bulb must be ordered separately. Our article number 14282.
PDF FILE 
Hazard warning signal switch, universal, 12volt, Manufacturer HELLA The switcher uses the actual
indicator-relais. easy to fit.
Hazard warning light switch, manufacturer Hella. Complete with mounting bracket for retrofitting
The hazard warning light switch is operated via the original flasher relay. Suitable light bulb: 50096 for 12 V. 14271 for 6 V.
P 404/504, carbon brush for the disengageable fan blade at the water pump. Suitable for Peugeot
203, 403, 204, 304, 404, 504. Or. No. 126713 + 140421
Water hose screen wiping water, PVC clear. Inside diameter: 3mm, outside diameter: 5mm. Operating
g pressure maximum 7.5 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 4mm, outside diameter: 6mm. Operating
g pressure maximum 6,0 bar. By meters. Custom cut, return not possible!
Water hose screen wiping water, PVC clear. Inside diameter: 5mm, outside diameter: 7mm. Operating
pressure maximaum 7.0 bar. By meters. Custom cut, return not possible!
Wiper blade eleastic, per piece. Suitable for Citroen Dyane + ACDY, AMI6, Mehari, HY. Renault R4
4, Rodeo. Peugeot 403 + 404. 280mm lengthens. Original manufacturer Valeo! For 8mm of wide wiper arms.
Wiper blade - windscreen wiper. Length: 32cm. Material: stainless steel (not polished). For 6,0
6,5mm wide wiper arms with straight connection. Universal suitable. E.g. Citroen DS, AMI, CX, GS. Renault 5,6,12,15,16,17,18. Alpine A110 + 310. Peugeot 204,304,504 and many many other classics.
Spark plug electrodes extension. Suitable for Peugeot 403, 404, 504, J7. Renault R16. The extension
fits also on Citroen DS + HY. With Citroen DS can be, that the rubber protection from the ignition cable, must cut off a little bit. It can be, that you must change the hole from the spark plug locking cap to 10mm. Normally no changes are necessary. Just opposite DS, the extensions from the Peugeot method is an significant improvement, because the electrode is fully insulating!
Spark plug isolation pipe. Suitable for Peugeot 203, 403, 404, 504. Original material (PF CP 21)
Dimension: 15 x 13 x 135mm. Made in Germany
Spark plug NGK BP5ES. Suitable for Peugeot 404 apart from 404 injection engines, 504 (2,0 TI), 504
V6. Thread: M14 x 1.25 x 16mm. Wrench 21mm.
Spark gap measurement (testing) tool. With the help of this small, inexpensive tool, the spark gap
of the spark plug can be checked very easily and safely. So, if the engine does not start: Is the spark plug sparking at all! And if so, how strong! Then exclusion procedure: Ignition OK? It is not getting any petrol!
Spark plug extension spring (set of 4). Made of copper (better conductivity). Length: 165mm
Suitable for Peugeot 203, 403, 404, 504. Or. No. 596301. This spring connects the spark plug to the spark plug connector!
Flexible Spark Plug Remover/Installer. This specially designed tool allows access to spark plugs
where they are deep seated or require off-line access. The tool is also designed to grip the spark plug securely allowing the removal with ease.
Heli coil spark plug thread repair set. For all M14 spark plugs. Contents: 1 bore + cutting tool
installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).
Spark plug thread M14 thread inserts. Suitable for our repair kit 21176. Length of thread inserts
9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug thread M14 cleaner, with a cutter for the spark plug sealing ring. This combination tool
can clean your contaminated thread and make it usable again. In addition, the sealing surface around the thread is nicely planed again. But be careful: if the spark plug thread is already badly damaged, you will need to insert a new thread (item 21176).
Spark plug thread M14 repair kit (for repairing defective spark plug threads). Hobby quality. For
all M14 spark plugs. The repair kit comes with an HSS thread cutter (drive wrench size 17 mm) and 4 thread inserts. Length of thread inserts: 9.7 mm + 11.0 mm + 13.0 mm + 19.1 mm.
Spark plug wrench (adjustable in length), for 20,8mm spark plugs. This key is perfect for the
Citroen DS. It can be used with the normal electrode extension. Fitting for 3/8 inch ratchet (medium size). Fits of course also on all other spark plugs, for 21mm tools. Manufacturer: HAZET. Adjustable length from: 137,5mm to 157,5mm and 195,5mm. With spark plug holding rubber.
Spark plug wrench (tube wrench), for 20.8 mm spark plugs. 300mm long! Particularly for Citroen DS
Peugeot 203, 403, 404, 504. Workshop quality!
Ignition coil 12 volt (Bosch), without pre-resistor. Suitable for Citroen DS, GS, HY. Peugeot 203
204, 304, 403, 404, 504, J7. Renault R4, R5, R16 etc.. We have it again, the original Bosch Asphalt ignition coil! The ignition coil owes its name to the fact that asphalt is used for the insulation inside the coil (just like before!)
Ignition coil with pre-resistor. 12 V. Brand manufacturer! Suitable for Citroen DS, CX, GS, AMI8
Super. Peugeot 403, 404, 504, 505. Renault R4, R5, R12, R16 etc.
Ignition coil 12 V, without pre-resistor. Suitable for Citroen DS, GS, HY. Peugeot 203, 204, 304
403, 404, 504, J7. Renault R4, R5, R16 etc.. Original VALEO
Spark Indicator. This non-contact spark tester will test for the presence of power in spark plugs
coils and distributors. Simply place the grooved end over the spark plug wire with the engine running and the high intensy bulb will flash indicating spark. Note: Depending upon screen of the ignition cables, it can be possible, that you see the flashing by daylight, very bad!
Distributor completely (reproduction, type Ducellier M48). Suitable for Peugeot 203 + 403 (engine
TN3-TN5). Peugeot 404 (engine XC5, XC6, XC7). Peugeot 504 (engine: XN1). Or. No. 5901.44
Auxiliary headlight: Fog headlight small, type Marchal 640. Optically like original. Universal
fitting. This headlamp was an original related accessory for Citroen 11CV. Diameter: 140mm. The case is chromium-plated and made of metal. Without "E" test character! Suitable bulb 12 Volt= 14415, 14418, 14417. Bulb 6 V = 14178
Brake cylinder hone. For use with a cordless drill to clean brake cylinders during service
22-69mm. For honing out brake cylinders. For use with a standard drill.
Engine cylinder hone. Enables the inside surface of the cylinders to be cleaned of carbon deposits
etc. Suitable for all cylinders with a bore diameter of 50
Cylinder head gasket Indenor Diesel. Engine: XD85. Suitable for Peugeot 403 Diesel, 404 Diesel
first years of construction. Citroen HY Diesel. Original manufacturer.
Cylinder head gasket set for Indenor Diesel. For engine: TMD85, XDP85, TMD85-AD, XPD (1816cc)
Suitable for Citroen HY Diesel. Peugeot 403 Diesel, 404 Diesel, 504 Diesel, J7 Diesel. Heavy one: 1,25mm. Or. No. 0199.48
1196 Articles | Page 24 of 24
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
