P 403/404/J7, rear brake hose. Suitable for Peugeot 404 up to the year of construction 1966
Peugeot 403 second model. J7 first model. 5/8 UNF male thread. 7/16 UNF female thread. Length 485mm.
for Peugeot 203-403
1203 Articles | Page 19 of 25
P 403/404/J7, piston + liner (4 pieces). Suitable for Peugeot 403 (8CV), of year of construction
1955 to 1961. Peugeot 404 U6 Commerciale (8CV). Peugeot J7 B 1400kg. Engine capacity: 1468cc. Bore: 80,0mm. Piston pin: 22 x 67mm. Piston rings: 2,0 + 2.0 + 4.5 + 4,5mm (4 coils). Overall length of the liners: 140mm
P 403/404/Simca, wheel brake cylinder rear. Suitable for Peugeot 403, of year of construction
5/1958 to 1965. Peugeot 404 to year of construction 10/1965. Simca Aronde. Piston diameter: 25,4mm. Brake line connector: 3/8 x 24 UNF. Mounting board bore: 36mm. Length over everything: 72mm. Or.Nr. 440215. Made in Europe.
P 403/404/Simca, wheel brake cylinder rear. Suitable for Peugeot 403, of year of construction
5/1958 to 1965. Peugeot 404 to year of construction 10/1965. Simca Aronde. Piston diameter: 25,4mm. Brake line connector: 7/16 x 20. Mounting board bore: 36mm. Length over everything: 72mm. Flanging type "E" Made in Spain.
P 403D/404/J7/HY, piston (1 piece), suitable for Citroen HY Diesel. Peugeot 403 D, 404 D, Peugeot
J7 Diesel. For engine: XDP 85. Engine capacity: 1816cc. Bore: 85mm.
P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel, Peugeot J7 Diesel
Citroen HY Diesel. For engine: XD85, XDP85, TMD85. Engine capacity: 1816ccm. Bore: 85mm. Dimensions of the liner = outside diameter down: 93mm.
P 403D/404/J7/HY, liner (1 piece), suitable for Peugeot 403 Diesel, 404 Diesel, Peugeot J7 Diesel
Citroen HY Diesel. For engine: XD85, XDP85, TMD85. Engine capacity: 1816ccm. Bore: 85mm. Dimensions of the liner = outside diameter down: 96mm.
P 404, brake hose in front, suitable for Peuegot 404 with brake assistance to year of construction
1966. Length: 354mm. Thread: 3/8 x of 24 male threads, 3/8 x of 24 female threads + 5/8 x of 18 male threads. Suitable for vehicles with 4,5mm brake hose. Made in Spain. Note : 404 without Hydrovac all had 7/16" until about 1966. The new lines with 3/8" thread appeared with the Hydrovac.
P 404, carburetor 34 BICSA (reproduction). Suitable for Peugeot 404 (engine XC6). Not suitable for
automatic gearbox. Peugeot 403. Peugeot 504 (engine XM7).
P 404/403/504/J7, sealing ring for the liner, bottom (sealing in the engine block). Dimensions
78.2 x 81.8 x 5.0mm. Suitable for Peugeot 403 (engine 8CV TN3). 404 (Engine 8CV + 9CV > 1970). 504 (XM1L8). J7 until 1970. Or. No. 0112.17. Made in Germany
P 404/403/J7, engine suspension in front. Suitable for Peugeot 404, Peugeot 403, Peugeot J7. Fuel
engines. Hole spacing: 86 mm. Dimension rubber block: 70x50mm. Height: 30mm. Or. No. 1807.13
Park light (clearance light) completely, mounts onto the front fender. Color: red-white. Suitable
for Peugeot 404 sedan + 404 Cabrio/Coupe. Peugeot 403 + 504 sedan. Or. No. 6325.06
Park light, suitable for Citroen 11CV, HY. Peugeot 203, 403. Renault Dauphine etc. Per piece
Color: Red white. Installation opening diameter: 17,5mm. This light can also universal Installed. E.G. Citroen 2CV. Or. No. 721119
Positive cable (battery to starter motor). Overall length: 500mm. Cable diameter: 16mm². Made in
the European Union. Universal fitting.
Upholstery Cleaner, Deep cleaning foaming action, 500ml. Eliminates tough stains and soils like
oil, grease and tar spots.
Hog Ring Pliers for use with A7 Hog Rings (Part No 21049). Complete with automatic feed. Ideal for
continuous connections. Single handed operation. Ideal for upholstery on classic cars.
Hog ring plier for the mounting of coverings (workshop quality). With this pliers the hog ring`s
18420 are optimally treated.
Section rubber adhesive + covering adhesives, in a brush box 350ml. Indispensably with work on one
cover! Also premium for profile rubbers, full rubber, foam rubber, leather, lines, felt
Wheel Stud Restorer Kit. For repairing damaged wheel stud threads using a reverse action to ensure
the alignment of the thread. Includes adaptor sizes: M12 x 1.25mm. M12 x 1.5mm. M14 x 1.5mm.
wheel brake cylinder repair set 403-404, 11CV. rear, 1 inch piston, 1960>65, till Thermostable
changing came. 11CV all model.
Wheel bearing front. Suitable for Simca 1000 + 1200, from 1968 to 1976. Peugeot 203. Outer
diameter: 80mm. Inner diameter: 40mm. Height: 30mm.
Wheel nut short, galvanizes, for 2CV, Dyane, Mehari, AMI, GS, DS. Peugeot 403, 404, 204, 304, 504
505. Thread: M12x1,25. Lubricate before mounting. Original supplier! Been suitable to torque: 130Nm
The brake-down aid for on the road. SONAX TyreFix restores driveability to flat tyres, without tyre
change. Seals small holes in the tyre and pumps it up. Practical, fast and safe. 400ml
Tire 155R400X TT83S (X - profile). Manufacturer Michelin. Suitable for Citroen 2CV Sahara. Citroen
DS on the rear axle (fifties - at the beginning of sixties). Peugeot 203, Renault Juvaquatre
Tire 165R15 86V TL XAS NO. Manufacturer Michelin. Suitable for Citroen DS. Peugeot 403, Peugeot
404. Simca Ariane, Renault Fregate
Tire 165R400 XTT 87S. Manufacturer Michelin. Suitable for Citroen 11CV. Citroen DS from the fifties
at the beginning of sixties. Peugeot 203 BREAK.
Tire Michelin, size 165R400 XTT 87S, with white wall 20mm. Suitable for Citroen 11CV, DS early
years of construction. Peugeot 203 BREAK.
Innertube, for 155x400, 165x400 + 175x400 tire. Original Michelin. Suitable for Citroen DS (early
years of construction). Citroen 11CV. Peugeot 203.
Tire valve adapter of TR13 (13mm) on TR15 (15mm). This adapter is required, if you have old rims
with 15mm hole for valves. New valves are always 13mm in the diameter.
1203 Articles | Page 19 of 25
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
