for Peugeot 203-403
1197 Articles | Page 22 of 24
Solex, carburetor nozzle set, for Solex 32 PBIC. Suitable for Peugeot 203 + Citroen 11CV
Consisting of: 1x main jet 190. Hollow bolt with external 135 nozzle. 1x slow-running jet 60. 1x mixing tube. 1x hollow bolt with internally 125 nozzle + 1x 50 nozzle.
Mirror on the left, chromium-plates. Original French manufacturer "CIPA". Suitable for Peugeot 204
404, 504. Renault R4 to year of construction 1985. R5, R8, R10, R16 etc. Hole measurement: 65,5mm. Dimension mirror glass: 163 x 111mm. Made in France
Mirror approximately. The mirror is wedged at the door or the roof. Diameter: 100mm. Strongly
curved fixture. Completely made of metal.
Mirror round. Diameter: about 105mm. Completely made of metal. Very beautiful small mirror
Mounting holes center - center: 47mm.
Mirror SPORT. Mounting on the fender. Diameter: 100mm. Completely made of metal. Typical, sporty
mirror from and the fifties and sixties.
Mirror for clamping to the door. Made entirely of metal. Typical door mirror, as often used in the
1940s and 1950s (Citroen 11CV, Peugeot, Renault). Diameter: approx. 95 mm. Suitable for left and right!
Mirrors to attach at the door. Completely made of metal. Typical door mirror, how it installed very
often in the forties and fifties. Diameter: about 100mm.
Spray adhesive, 500ml. Very useful for affixing of interior lining, damming mats, hoods etc. High
adhesive. We have been searching for a long time since we found a really good one.
VIDEO 
Trakrite Wheel Alignment Gauge. Trakrite is the simplest, most accurate device for checking the
alignment of the steered wheels of car and light commercials. It is a roller bearing platform over which one front wheel is slowly driven with the wheels in their straight ahead position.
Tie rods + tie rod end separator. Suitable for Citroen 2CV, DS, 11CV, 15CV. Renault R4, R5. Peugeot
404 etc. clamping range 16-18mm. Opening 19mm!
Dust cap from rubber, for the vent screw at brake calipers and wheel brake cylinders. Universal
suitable for Citroen, Peugeot, Renault.
Dust cap brake piston. E.G. wheel brake cylinders in front Citroen 11CV (1.25 inch). Also suitable
for other vehicles with 1,25 inch piston. (30,75mm)
Dust cap wheel brake cylinder, for piston diameters: 3/4 inch (19,05mm). Suitable for Citroen HY
Also universal fitting for other vehicles! Made in France
Dust cap wheel brake cylinder, for piston diameters: 7/8 inch (22,25mm). Suitable for Citroen HY
11CV, 15CV, 2CV. Also universal fitting for other vehicles! Made in France
Stud bolt M7x43mm (thread M7x1). This stud bolt are installed, for example, at the exhaust elbow
with Citroen 15CV. Elbow pipe Citroen DS, etc. Universally fitting!
Camshaft drive chain tensioner. Suitable for Peugeot 403, 404, 504, 505, 604, J7, J9. Engines: XB2
XB5, U6, U8, XC5, XC7, XM7, XN1, KF5, KF6, XN1, XN2, XNA, XN6, SRI, XM, XM7, XN1P. Or. No. 0849.06
Oil for shock absorber (motorcycle fork oil) 500ml, 10W, medium viscosity. This OIL woks very good
in the front shock absorber from Peugeot 204.304.404.504 etc. Around 350ml needed per shock absorber .
Cam follower (diameter: 23,98mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot
504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot 505, Peugeot 604, Peugeot J7. Citroen HY. Or. No. 0942,13 + 7910031879. Please compare the dimensions!
Cam follower (diameter: 24,0mm). Length: 48mm. Suitable for petrol engines: Peugeot 203, Peugeot
403, Peugeot 404, Peugeot 504, Peugeot J7. Diesel engines: Peugeot 404, Peugeot 504, Peugeot J7. Citroen HY. Or. No. 0942.05. Please compare the dimensions!
Push rod for inlet + exhaust (6.5 x 242,5mm). Suitable for diesel engines: Peugeot 403D, Peugeot
404D, Peugeot 504D, Peugeot 505D, Peugeot J7D. Citroen HY CD. per piece. Or. No. 0940.08
Push rod inlet (6.75 x 185mm). Suitable for petrol engines: Peugeot 403, Peugeot 404, Peugeot 504
Peugeot 505, Peugeot J7. Or. No. 0939.03
1197 Articles | Page 22 of 24
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
