for Peugeot 203-403

P 203/Simca, wheel brake cylinder in front. Piston diameter: 28,57mm (1 1/8 inch). Suitable for

Peugeot 203 + Simca Aronde, Renault G80, Ford Vedette. Brake line connector: 7/16x20 UNF. Mounting board bore: 36 mm. Length over everything: 67 mm. Or. No. 4401.08. Made in Spain.

• Suitable for this article
• 
  Brake cylinder paste. Manufacturer: FÖRCH. 5g brake cylinder paste for
  5,56 €

P 203C, seal above on the windshield. Seal above at the windshield frame. Suitable for Peugeot 203

Cabriolet. Or. No. 8451.03

P 203C/403C, rubber stop above, for the door disk (end stop). 2 item. Suitable for Peugeot 203

Cabriolet + 403 Cabriolet. Or. No. 9306.01 + 9306.02

P 204/403/404/504, wheel bearing rear (exterior bearing). Outside diameter: 52mm. Inside diameter

20mm. Wide one: 15mm. Suitable for Peugeot 204, 403, 404 + 504. Or. No. 3735.03 Made in Spain

P 204/404/202, brake hose front, suitable for Peugeot 204 + 404, up to presumably year of

construction 1966. Peugeot 202 rear. Length: 376mm. Thread inside: 3/8 x 24 UNF (both sides). Thread outside: 5/8 x 18 UNF (both sides). Attention: These brake hoses are for brake line flare bolts with thread offset at the bottom! From approx. year of manufacture 1966 the flare screws have been replaced by a full thread! Made in Europe.

• Suitable for this article
• 
  Nut 5/8 x 18 UNF. For the securement of brake hoses.
  1,64 €

P 403, seal foam rubber, in front at the front left fender. Suitable for Peugeot 403. Original one

no reproduction (NOS). Or. No. 7843.09

P 403, starter switch for Ducellier + Paris-Rhone starter motor. With the help of this original

switch (rarity), a starter operated with a cable can be converted to an electric starter switch. The original instructions can be found in the workshop manual 403 (the cable is replaced by an electric cable). Original Peugeot (NOS). Or. No. 5868.30

P 403, exhaust from high-grade steel. Suitable for Peugeot 403 Berline. Without mounting material!

P 403, exhaust pipe (elbow pipe) in front. Suitable for Peugeot 403 sedan + BREAK. Only suitable

for petrol engines. Installed from year of construction 1955 to 1966. Or. No. 170129

P 403, exhaust pipe (elbow pipe) in front. Suitable for Peugeot 403 Pick UP. Diesel engine

Installed from year of construction 1955 to 1966.

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 38,5mm. Length: 130mm
  5,86 €
• 
  Exhaust clip 38mm (clamp clip). Thread: M8
  2,53 €

P 403, exhaust pipe center (between the silencers). Suitable for Peugeot 403 Pick UP. Fuel engine

Installed from year of construction 1955 to 1966.

• Suitable for this article
• 
  Exhaust clip 38mm (clamp clip). Thread: M8
  2,53 €
• 
  Exhaust clip 42mm (clamp clip).
  2,88 €

P 403, exhaust pipe center, between the two silencers. Suitable for Peugeot 403 sedan. Installed

from year of construction 1955 to 1966. Or. No. 172201

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 38,5mm. Length: 130mm
  5,86 €
• 
  Exhaust clip 42mm (clamp clip).
  2,88 €

P 403, exhaust pipe center, between the silencers. Suitable for Peugeot 403 BREAK (Commerciale +

Familiale). Installed from year of construction 1955 to 1966.

• Suitable for this article
• 
  Exhaust pipe link (tubing adapter). Inside diameter 38,5mm. Length: 130mm
  5,86 €
• 
  Exhaust clip 42mm (clamp clip).
  2,88 €
• 
  Exhaust clamp clip (U-clamp) for 40mm pipe (elbow pipe into the silencer)
  2,83 €

P 403, cable heater adjustment, Peugeot 403 (2 serie). Or. No. 6473.05

P 403, front indicator socket Peugeot 403. Suitable for all models. Corresponds to Or. No. 6307.04

6307.12 + 6307.14 + 6307.13

• Suitable for this article
• 
  P 403, seal under the front indicator. Suitable for Peugeot 403. Or. No. 6304.03
  8,19 €

Turn signal cap with edge of chrome clearly, Peugeot 403, diameter 11,5cm

Turn signal cap with edge of chrome orange Peugeot 403, diameter 11,5cm

P 403, turn signal cap in front, without chrome trim. Color: clearly. Suitable for Peugeot 403.

P 403, seal (2 item) outside at the triangle window, seal to the windshield frame. Suitable for

Peugeot 403 Cabriolet. Or. No. 9022.06

P 403, seal from cork, at the cylinder head. Suitable for Peugeot 403 Diesel + Citroen HY. Engine

TMD + XDP85. Or. No. 0147.04

• Suitable for this article
• 
  Engine sealing compound grey, to 340°, 85ml, silicone basis. Optimally for oil
  5,15 €

P 403, Gasket for the intermediate plate under the timing cover . Suitable for Peugeot 403. Or. No

0321.06

P 403, Gasket for timing cover. Suitable for Peugeot 403. Or. No. 0321.05

P 403, seal under the luggage compartment hood handle. Suitable for Peugeot 403. Or. No. 8633.03

P 403, seal under the front indicator. Suitable for Peugeot 403. Or. No. 6304.03

• Suitable for this article
• 
  P 403, front indicator socket Peugeot 403. Suitable for all models. Corresponds
  34,61 €

Spare part catalogue Peugeot 403, speech: german, reprint, 538 pages

P 403, window frame from high-grade steel, in the door in front on the left. Peugeot 403 with

quarter vent-vent window in front. Original Peugeot NOS. Or. No. 931506

P 403, window frame from high-grade steel, in the door in front on the right. Peugeot 403 with

quarter vent-vent window in front. Original Peugeot NOS. Or. No. 931606

P 403, window frame from high-grade steel, in the door in front on the right. Peugeot 403 without

quarter vent-vent windows in front. Original Peugeot NOS. Or. No. 931016

P 403, set of floor mats. Velour Exellence beige with beige vinyl border trim (front + rear)

Suitable for Peugeot 403, very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 403, set of floor mats. Velour Exellence dark blue (Bleu marine) with light grey (Gris clair)

vinyl border trim (front + rear). Suitable for Peugeot 403, very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 403, set of floor mats. Velour Exellence dark grey (Gris foncé) with light grey (Gris clair)

vinyl border trim (front + rear). Suitable for Peugeot 403, very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 403, set of floor mats. Velour Exellence light grey (Gris clair) with dark grey (Gris foncé)

vinyl border trim (front + rear). Suitable for Peugeot 403, very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.

P 403, transmission suspensions. Suitable for Peugeot 403. Or. No. 1843.27

P 403, rubber under the license plate light. Suitable for Peugeot 403. Or. No. 6341.08

P 403, rubber under the tail lamp (per piece). Suitable for Peugeot 403. Or. No. 6344.02

P 403, rubber seal, for the steering column in the interior. Suitable for Peugeot 403. Or. No

4152.07

P 403, rubber seal corner (rubber cap), on the left in front at the hood. Suitable for Peugeot 403

Cabriolet. Or. No. 8453.03

P 403, rubber seal corner (rubber cap), on the right in front at the hood. Suitable for Peugeot 403

Cabriolet. Or. No. 8453.04

P 403, rubber seal corner at the rear left, for the hood. Suitable for Peugeot 403 Cabriolet. Or

No. 8453.05

P 403, rubber seal corner at the rear right, for the hood. Suitable for Peugeot 403 Cabriolet. Or

No. 8453.06

P 403, rubber seal corner down, at the left hood bow. Suitable for Peugeot 403 Cabriolet. Or. No

8453.07

P 403, rubber seal corner down, at the right hood bow. Suitable for Peugeot 403 Cabriolet. Or. No

8453.08

P 403, rubber seal for the clutch pedal in the engine front wall. Suitable for Peugeot 403. Or. No

2131.05

P 403, rubber seal between wiper engine and securement. Suitable for Peugeot 403. Or. No. 6417.04

Handbrake cable Peugeot 403 starting from 10/1960

hand branke cable Peugeot 403 till 10/1960. Or.No.483427

Handbrake cable Peugeot 403 1956 till 1962. Break, 2020mm, Or.No.483430

P 403, hand brake cable. Suitable for Peugeot 403 U8, of year of construction 1956 to 1967! Overall

length: about 2050mm. Casing length: about 1560mm. Or. No. 483431

Tail - Shutter. Suitable for Peugeot 403 sedan. Quickly installed (the brackets are only inserted

into the upper and lower rear window rubber). A typical accessory from the sixties. Made in France

weatherstrip rear window Peugeot 403 replica