for Peugeot 204-304
Hydraulic line Brake line flaring tools for use at the vehicle (to use at the car). For all
flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.
Interior insulation mat (approx 10mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 15mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat (approx 20mm thick), self adhesive, optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
Interior insulation mat for the floor (10mm thick), optically as from the years 60s to approx. end
of the 70s. Dimensions: approx. 105 x 55cm (approx. 2900g/m²). These mats have the greenish colour of the original felt mats, with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior insulation mat for the floor (approx 15mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior insulation mat for the floor (approx 20mm thick), optically as from the years 60s to
approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3500g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
Interior mirror, suitable for Peugeot 104, 204, 304, 404, 504, J7. Screw-fitted. 35mm hole spacing
g. Dimensions: 65x215mm. Or. No. 8150.21
Isolation tape with fabric surface. This adhesive tape has been specially manufactured for cable
harnesses. Vintage-style coton fabric appearance, making it visually compatible with historical cable wraps (unlike normal insulating tape). The tape can be used to insulate broken sections or electrical modifications. Of course, you can also use it to rewrap the entire wiring harness. Good protection against external mechanical abrasion (e.g. sharp edges)and dirt. Good temperature-resistant. Width: 19 mm. Length: 10 metres. Made in Germany. Ideal for Citroën 2CV, DS, ID, HY, 11CV, all classic Renault and Peugeot models.
Cable binder from rubber, length 155mm. Wide 35mm! For main cable harnesses to 30mm diameter. Now
manufactured from improved material (NBR/SBR fabric rubber)
Cable tie assortment (black). 75 pieces. Content: 25 cable ties 3.0 x 100 mm, 25 cable ties 3.0 x
120 mm, 25 cable ties 3.6 x 200 mm
Popular assortment of rubber Wiring & Blanking grommets. Wiring Grommets from 6mm to 16mm. Blanking
Grommets from 8mm to 25mm. Box Qty 240
Grey edge protector, universal U-profile (with metal core). Sold by the metre. For clamping range
1-4 mm. Custom-cut items cannot be returned! This edge protector is, of course, also ideal for the 2CV's roll-top roof opening. But it is, of course, suitable for many classic French cars!
Red edge protector, universal U-profile (with metal core). Sold by the metre. For clamping range
1-4 mm. Custom-cut items cannot be returned! This edge protector is, of course, also ideal for the 2CV's roll-top roof opening. But it is, of course, suitable for many classic French cars!
Edge protection, U-profile with felt lining on one side (with metal core). Sold by the metre
Maximum clamping range: 3 mm. This sliding edge protection is, of course, ideal for use wherever sliding windows are fitted! Cut to customer's specifications - no returns accepted!
V-belt 10x737. Suitable for Citroen DS, for the hydraulic pump. To year of construction 1965 ( 2
V-belts per vehicle required). Peugeot 204 (generator). Peugeot 505 2,5TD (Vacuum pump). Renault R16TS + R16TX.
V-belt 10x775mm. Suitable for Peugeot 304. Citroen Visa 0.6 (2 liners). Citroën AMI6 with M4
engine and small Ducellier alternating current alternator.
Children's push 2CV (for learning to walk). Approx. 78cm long. Made entirely from wood. Made in the
EU. This cute 2CV is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!
Children's push Renault R4 (for learning to walk). Approx. 78cm long. Made entirely from wood. Made
in the EU. This cute R4 is just the thing for dads and grandads who want to make a sensible gift for their little ones. And when the little ones get too big, it makes a nice cold drink storage - decoration - object, for all garages, terraces etc. The rear push bar can be dismantled in 1 minute! Sale - well below our purchase price!
Rocker switch for the warning signal light. Suitable for Renault R4, of year of construction 1963
to 1980. Renault R16. Peugeot 204, 304, 404, of year of construction 1961 to 1980. Peugeot 504, of year of construction 1968 to 1978. Dimension: 36 x 18mm.
Toggle switch with polished head. Version: Changeover switch. 3x electrical connection. Load
capacity: 5 amps. Bore diameter: 12.5mm. This switch is a changeover switch. You can therefore switch 2 functions. But of course it can also be used as a normal toggle switch. Then only 2 electrical connections are connected. Switching function: On - Off - ON
Toggle switch with white head. Type: ON-OFF toggle switch! 2 electrical connections. Current
rating: 5 amps. Mounting hole diameter: 13 mm. This switch has the following function: ON - OFF
Toggle switch with white head. Design: Toggle switch for switching between two functions! 3-pin
connection. Rated current: 5 amps. Mounting hole diameter: 13 mm. This switch has the following settings: On - ON
Toggle switch with white head. Version: Changeover switch. 3x electrical connection. Load capacity
5 amps. Bore diameter: 13mm. This switch is a changeover switch. You can therefore switch 2 functions. But of course it can also be used as a normal toggle switch. Then only 2 electrical connections are connected. Switching function: On - Off - ON
