Rubber cap for the connection to the starter motor. (Protecting cap)
This cap should never be missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm. Colour: red.
This cap should never be missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 22mm. Colour: red.
This cap should never be missing. Universal fitting! For max. cable diameters: 17,8mm. Inside diameter 30mm. Colour: red.
This cap should never be missing. Universal fitting! For max. cable diameters: 7,62mm. Inside diameter 12,7mm.
403, 104, 204, 304, 404, 504, 604, J7, J9). Or. No. 5611.02
Citroen brake hose seals etc. Contents: 1x straight line hook, 1x 90° hook, 1x hook point, 1x awl.
Per piece. Or. No. ZC9619867U
Suitable for switch with 36x18mm installation hole.
Facilitates exactly and controlled alloting of the spray. A real alleviation.
For the repair of the heating flow control valve. Suitable for Citroen DS, GS Birotor, Peugeot 204/304
For plating threads in materials with low shearing strength 1 twist drill, 1 tap, 1 installation tool, 1 tang breaker, 25 x M7x1 coil.
hand taps from HSS, mounting spindle, insertion pin breaker (to M12). In each case, 10 theaded inserts M7 in the lengths: 7,0mm, 10,5mm, 14,0mm. Original Helicoil, no reproduction.
1 bore + cutting tool, installation spindle. 10x heli coil insert M14x1,25x17,5. (Spark plugs with long threads). 10x heli coil insert M14x1,25x12,7. (Spark plugs with short threads, 2CV, R4).
transparent adhesive material for the roof and door linings.
0mm. Bore diameter: for each 36,5mm. Suitable for Peugeot 204, Peugeot 304 (engine XL5 + XK5). Peugeot 404, 504, 505, J5, J7. Or. No. 1710.09
relay and air hoses. 750 + 800Hz (2 different tones). 115dB (A). Length of the air horns: 210 + 165mm. Length of the air compressor: about 105mm.
made in the European Union. The horn is made of metal, with a red cover (trumpet) from plastic! Universal fitting. Diameter: about 110mm. ECE checked.
made in the European Union. The horn is made of metal, with a red cover (trumpet) from red synthetic! Universal fitting. Diameter: about 110mm. ECE checked.
made in the European Union. The horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.
made in the European Union. The horn is from the front in red painted! Universal fitting. Diameter: about 91mm. Metal housing. ECE checked.
Volume: 118 db(A), operating voltage: 12 V, power consumption: 48 W each, diameter: 156 mm, depth: 91 mm, EMV protection: included. Universal fitting.
The fixture has a rubber lining and is to attach. Suitable for 3,5mm line.
The fixture has a rubber lining and is to attach. Suitable for 4,5mm line.
The fixture has a rubber lining and is to attach. Suitable for 6,35mm line.
The fixture has a rubber lining and is to attach. Suitable for 8,0mm line.
to use at the car). For all flanging! For all Citroen lines with 3,5mm, 4,5mm + 6,35mm (1/4 "). For all lines after DIN/CSAE, for flanges of the types CD, E, F, F180 in the usual quantities 4,75mm, 6mm, 8mm, 9mm and 10mm.
please impregnate the hood at least in spring and autumn!
optically as from the years 60s to approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 600g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
optically as from the years 60s to approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 900g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
optically as from the years 60s to approx. end of the 70s. Dimensions: approx. 115 x 55cm (about 1200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), but have been manufactured according to today's automotive technology. Flame retardant, no harmful vapours! Completely "Made in Germany". These mats were installed in firewalls, doors, side panels, boot. For the vehicle floor we recommend the mats with a heavy layer (bitumen-like). We have been looking for them for a long time, and finally found some!
optically as from the years 60s to approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 2900g/m²). These mats have the greenish colour of the original felt mats, with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
optically as from the years 60s to approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3200g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.
optically as from the years 60s to approx. end of the 70s. Dimensions: approx. 105 x 55cm (approx. 3500g/m²). These mats have the greenish colour of the original felt mats (made from recycled cotton fibres), with an additional heavy layer (modern bitumen, does not age, does not crack, UV resistant, water repellent, state-of-the-art automotive technology, but with the look of the old days!) The insulation material is flame retardant, no harmful vapours! Completely "Made in Germany". These mats are laid on the vehicle floor or cardan tunnel. Heavy layer to the carpet side! The heavy layer also prevents "droning noises". The mats can be deformed by heat and adapt to the contours.