P 304, door lining in front on the right. Color: Vinyl dark-brown, down silver (brun 3331)
Suitable for Peugeot 304 (sedan), to salon 1972. Original Peugeot, no reproduction. Or. No. 9375.30
for Peugeot 204-304
1150 Articles | Page 18 of 23
P 304, door lining in front on the right. Color: Vinyl dark red, down in silver (Rouge 3306)
Suitable for Peugeot 304 (sedan), starting from salon 1972. Original Peugeot, no reproduction. Or. No. 9373.88
P 304, centering wedge for the tail gate. Suitable for Peugeot 304 Coupe. Or. No. 8735.07
Original Peugeot, no reproduction.
P 304, liner (4 pieces). Suitable for Peugeot 304 (75HP). Engine: XL3S. Compression: 8,8: 1. Engine
capacity: 1288cc. Bore: 76,0mm. Outside diameter: 89.000 mm. Length over everything: 128,30mm.
P 304/104/205/Visa, tie rod end M14x1,5, suitable on the left of or on the right. Ball: M10. Height
ball: 74mm. Lengthens threaded rod to ball: 75mm. Suitable for Peugeot 304 starting from 1972, Peugeot 104, Peugeot 205, Citroen Visa.
P 304/305, drive shaft, fits on the left of or on the right. Peugeot 304. Overall length: 760mm
External toothing: 23 teeth both sides. Plus 75 Euro Old part deposit.
P 304/305, Rubber bush for the front anti-roll bar. For anti-roll bar diameter: 26mm. Used from
1978 onwards. The shape of the opening is 8 square! Diameter measured in the flanks = 24mm. Diameter measured in the corner = 26mm. Or. No. 5094.24
P 304/305, clutch cable. Length: 930mm. Suitable for Peugeot 304 + 305, to year of construction
06/1982. Or. No. 2150.45
P 304/305, generator with internal alternator regulator, for Peugeot 304, 305. Suitable for
engines: XL5, XL5S, XL5GL, XK5 to year of construction 1979. Engine XL4D to series of 4.111.421 = year of construction 1980. Paris Rhone A12R13, 12 V, 35A. Assembly position 120°. Old part deposit 150 euros. Or. No. 5705.35 + 5705.94
P 304/305, clutch disk. Suitable for Peugeot 304 Diesel (1,4+1,5D), starting from year of
construction 1976. Peugeot 305 Diesel (1,5+1,6D). Dimension: 200 x 137 x 3,2mm. 28 teeth.
P 304/305/504/505, repair set for the steering gear (28mm gear rack). Suitable for Peugeot 304
starting from year of construction 1977. Peugeot 504, 505, 604.
brake hose Peugeot 504 front 09/75-10/82, P 304, P305,P404,P604, length 401mm, connections male
thread M10 + female thread 1x M10. Made in Europe.
P 304/504/505/604, thrust piece (diameter 28mm) gear rack. Suitable for Peugeot 204, 304 (new
mounting). Peugeot 504, 505, 604. Or. No. 4062.10
P 304/504/505/604, bonded-rubber bushing for the anti roll bar. Diameter: 30mm. Length: 30mm
Inside diameter: 12mm. Or. No. 508709
P 304/Citroen, steering gear bellow. Suitable for Peugeot 304, starting from year of construction
07/1978. Citroen VISA + C15. Or. No. 4066.20
P 304C, exhaust pipe in front. Suitable for Peugeot 304 Cabrio + 304 Coupe. Installed from year of
construction 1969 to 1972.
P 304C, silencer rear (consisting of 2 silencers), only suitable for Peugeot 304 Cabrio + Coupe, of
year of construction 1969 to 09/1972. Or. No. 1724.41
P 304C, bonded-rubber bushing ouple rod at the front axle. Suitable for Peugeot 304 Cabriolet +
Coupe. Dimension: 12x30x30x24mm. Or. No. 5087.06
P 403/204, locking screw rocker arm shaft (with guide pin). Dimension: 5 x 8mm. Or. No. 0916.02
(Peugeot 403) + 0916.07 ( Peugeot 204). NOS Peugeot
P 404/504, brake hose in front + rear. Suitable for Peugeot 404, of year of construction 1969 to
1975. Peugeot 504, from 1968 to 08/1975. Peugeot 204, from 1968 to 1970. Length: 375mm. Connection: 1x male thread 3/8x24UNF. 1x male thread 5/8x18UNF with female thread 3/8x24UNF. Or. No. 4816.11 + 4816.12 . Made in Europe.
P 404/504, clutch taking cylinder. Piston diameter: 28,58mm. Connection thread: M10x1. Mounting
holes center to center: 48mm. Length over everything (without collar): 90mm. Suitable for Peugeot 404 to Ident: CH1012372. Peugeot 504 sedan + Cabrio, of year of construction 1/1969 to 1974. Peugeot 304 + J7. Talbot Murena, of year of construction 8/1981 to 1/1985. Or. No. 2086.11 + 2086.13. Made in Europe.
P 404/504/604/J7, clutch master cylinder sealing set. For piston diameters: 19mm. Suitable for
Peugeot 204, 304, 404, 504, 505, 604, J7.
P 504, Bleeder screw rear brake caliper. Brake system: Lucas. Thread: 3/8 x 24 UNF. Length: 36,6mm
Suitable for Peugeot 504 and many other Peugeots.
brake hose Peugeot 504 rear 09/75-10/82, length 369mm, Peugeot 204 + 304. Connections: male thread
M10 + female thread 1x M10, for drum brake rear, LNA front, Visa rear, 104 rear. - Made in Europe.
P204/404, door seal profile, sold by the metre. Suitable for Peugeot 204 and Peugeot 404. Height 20
mm, width 17 mm. Cut to customer's specifications - no returns accepted
Paris Rhone, condenser. Suitable for Peugeot 104, 204, 304, 404, 504, 505. Renault R4, R5, R8, R10
R12, R14, R16. Capacity: 0,27 µF. Or. No. 5948.14. Made in France.
Paris Rhone, condenser. Suitable for Peugeot 304, starting from year of construction 1977. 305
starting from 1977. Or. No. 5948.22
Paris Rhone, ignition contact. Suitable for Peugeot 304, Peugeot 305. The breaker point gap is
adjustable by hexagon socket screw! Or. No. 5927.77
Paris Rhone, distributor rotor. Suitable for Peugeot 204, 304, 305, 404, 504, 505, Renault 4 GTL
(1108cc), R12. Overall length: 50mm. Overall height: 23mm. Inner diameter 13mm. Or. No. Peugeot: 5937.08 + 5937.12, Renault 7701021366
Paris Rhone, distributor cap (system PR 1690). Suitable for Peugeot 204, 304, 404, 305 (1,3L +
1,5L), 504, 505 (of year of construction 11/1980 to 09/1991). Renault R4 GTL, R12. Or. No. 5941.17
PDF FILE 
1150 Articles | Page 18 of 23
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
