Windscreen washing water hand pump. Reproduction, completely with sheet metal holder for a later
mounting! Suitable for Citroen 2CV. In addition, the pump can be universal installed.
for Peugeot Heckmotor
1472 Articles | Page 25 of 30
Headlamp mounting bolt (stud bolt with ball). Dimension: 5 x 36mm. Thread: M5. Universal suitable
for many French vehicles.
Headlight reflector (without glass). Headlight system "Cibie 160mm". Quality finishing. This can be
used to repair the original headlight. Simply loosen the glass cleanly (the old reflector can be damaged) and glue it to the new reflector. Suitable for Renault: 4CV, Dauphine, R4, Estafette, R8, R10.....
Headlight reflector (without glass). Headlight system "Cibie 180mm". The reflector has an outer
diameter of 190mm, but is suitable for a lens with 180mm diameter. Quality reproduction. The original headlight can be repaired with this. Simply remove the glass cleanly (the old reflector may be damaged for this) and glue it onto the new reflector. Suitable for Renault: Floride, Caravelle, Fregate, R8 Gordine. Peugeot 203, 403, 505, Citroen DS up to 1967.
Universal protective rubber (e.g. for protecting electric cables, brake lines, brake hoses
handbrake cables, speedometer cables, petrol hose... External dimensions: 23x30mm. Inner diameter: 8mm. The rubber is slit on one long side, and can therefore be easily placed over the cable to be protected!
Universal protective rubber (e.g. for protecting electric cables, handbrake cables, petrol hose
External dimension: 42mm. Length: 31mm. Inner diameter: 12mm. The rubber is not slit (but of course this can be done afterwards if it makes assembly easier)
Tube bending sleeve. Suitable for hose outer diameter of 12,5 > 13,4mm. Length: 60mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 14,6 > 16,4mm. Length: 65mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 16,5 > 18,4mm. Length: 70mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 18,8 > 21mm. Length: 75mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Tube bending sleeve. Suitable for hose outer diameter of 21,8 > 24mm. Length: 90mm. With this you
can easily produce bent water hoses. Simple and ingenious!
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 26-38mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 32-44mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 38-50mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 40-56mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 50-65mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 57-75mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Screw set M5-M8 galvanizes. Consisting of: 20x M5x20, 15x M5x30, 25x M6x16, 20x M6x20, 12x M6x25
8x M6x30, 10x M7x20, 8x M7x30, 15x M8x20, 10x M8x30, 8x M8x40. Altogether 151 screws in a clear synthetic box.
Screw-safety-paint, yellow, 20ml bottle including brush. This paint to be fit as sealing and
marking paint and can be directly brought onto the spot which has to be marked.Standart product in the 60´s for marking on gearboxes, engines, hydraulic parts and chassis parts
Heat shrink tubing (kit from 100). These handy sheaths form a protective water resistant insulation
over exposed wiring and electrical connections. Designed for automotive use. Supplied in a plastic organiser.
Float from copper, in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above
37mm, down: 25mm, float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Float in the carburetor, for Solex carburetor 30/32/34-PICS/PCIS. Diameter above: 37mm, down: 25mm
float height: 27mm. Installed one e.g. in 2CV4+6, Peugeot, Dauphine etc.
Flywheel bolt (per piece). Suitable for Renault R4, R5, R6, R7, R8, R10... Original Renault! M
9x1,0 x 25mm, Or. No. old: 0706307900. Or. No. new: 7700854191
SEV, condenser. Suitable for Citroen DS (with SEV contact cartridge, starting from year of
construction 01/1969), GSA, HY. Peugeot 404, 504 etc.. Renault R4, R5, Fuego etc.. Length: 35,5mm. Diameter: 17,0mm. Brand manufacturer! Made in France.
SEV, ignition contact (large sickle type). Version SEV S403. This contact fits nearly for all
French cars, from the fifties + sixties, which have a SEV distributor. E.G. for Citroen ID-DS (year of construction 7/1954 to 8/1967). Citroen 11CV + HY. Peugeot 403 + 404 (of year of construction 1960 to 1975). Renault Dauphine, Floride, Caravelle, R6, Estafette. Talbot all models, with SEV distributor. Made in France.
SEV, ignition contact SEV, short version. Suitable for Citroen DS, to year of construction 03/1972
Citroen 11CV + HY. Peugeot 404, starting from year of construction 1968. Renault R4, early years of construction. Renault Floride, Dauphine etc. Simca + Talbot, different models. Or. No. DS: DY211217A. Or. No. Peugeot: 592724 + 592726.
SEV, distribution arm for distributor cap 48134. Suitable for Citroen 11CV, HY, DS, Peugeot
Citroen. Inside diameter 14mm. (Mounting at the distributor). Depth of the mounting 8,5mm. Distributor arm length over everything = 50mm.
PDF FILE 
SEV, distribution arm SEV 466. Suitable for Citroen 11CV, starting from year of construction 1942
Citroen HY. Peugeot 202, Peugeot 203 starting from year of construction 1949. Peugeot 403, starting from year of construction 1955. Peugeot 404, starting from year of construction 1960. Renault R4, Fregate, Juva, Dauphine, Floride. Simca 8, Aronde, Ariane. Suitable distributor cap: 72182
SEV, distributor rotor SEV. Type S4510. For distributors with contact cassette. Suitable for
Citroen DS + HY. Peugeot 504 GR, SR (from year of construction 1979). Renault R4 GTL (R1128, 2370 2430), R8, R10, R12, Renault R16, R18, Fuego. Matra Bagheera. Or. No. Peugeot: 5937.27 + 5937.07. Renault: 7701020056
SEV, distributor arm. Suitable for Renault R4, Renault rear engine. Peugeot 203, 403, 404. Citroen
DS, Citroen HY. Or.Nr.8556679. Length over everything: 50mm. Height over everything: 25mm. Inside diameter 14mm.
SEV, distributor cap SEV 1626. Suitable for Citroën 11CV. Citroën DS up to year of construction
1967 (the ignition distributor is located at the rear of the engine). Renault R6TL, from year of construction 09/1970. R8 Major from 09/1964. Dauphine from 09/1962 to 1965. Caravelle from 05/1960 to 1964. Inner diameter: 63 mm. Overall height: 60 mm. Or. No. Citroën DY211-15
SEV, distributor cap SEV 453. Outside diameter: 58,7mm. Suitable for Citroen 11CV, starting from
year of construction 1942. Citroen HY. Peugeot 202, Peugeot 203 starting from year of construction 1949. Peugeot 403, starting from year of construction 1955. Peugeot 404, starting from year of construction 1960. Renault R4, Fregate, Juva, Dauphine, Floride. Simca 8, Aronde, Ariane. Suitable distribution arm: 72183
SEV, distributor cap, firm carbon pins. Distributor diameter: 63,0mm. Suitable for Citroen 11CV
HY, DS, Peugeot, Citroen. The suitable distribution arm has our number 48247. Or. No. DM211-15A + DM211-15B
1472 Articles | Page 25 of 30
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
