Hog ring plier for the mounting of coverings (workshop quality). With this pliers the hog ring`s
18420 are optimally treated.
for Renault Alpine
1035 Articles | Page 14 of 21
Section rubber adhesive + covering adhesives, in a brush box 350ml. Indispensably with work on one
cover! Also premium for profile rubbers, full rubber, foam rubber, leather, lines, felt
R16, brake disk (2 fittings) 254mm. Suitable for Renault 16 in front, starting from year of
construction 1968 to production end. Renault Alpine A310 for the rear axle. Alpine A110 front. Diameter: 254mm. Heavy one: 12mm. Totally overall height: 39,5mm. Or. No. 7700572631
R16, piston for brake caliper in front. Brake system Bendix. Diameter: 48mm. Overall height: 44mm
Suitable for Renault R16, Alpine A310
R16/A310, Piston for brake caliper, front + rear. Brake system Bendix. Diameter: 54mm. Total
height: 47mm. Tread height: 37mm. Piston groove: 2mm. Piston collar: 8mm. Suitable for Renault R16 + Alpine A310 V6.
R16/A310, water pump. Suitable for Renault R16 (all models). Alpine A310 (4 cylinder, Alpine
1600VD). Round pulley bracket. Hole spacing: 30mm. Attention: There were different mountings for the pulley. However, as the pulley is centred in the middle, the mounting holes can easily be reworked slightly.
R16/Alpine, camshaft with distributer propulsion. For Renault engine 807-841 + 843. Suitable for
Renault R16 TS + R16 TX. R17 + R12 Gordini. Renault Alpine A110. New part.
R16/R12/Alpine A310, caliper sealing set, front. Brake system: Bendix. Suitable for Renault R16
R12, Alpine A310. For piston diameter: 54mm.
R16/R12TS/Alpine 110, master brake cylinder. Brake system: Bendix. Suitable for Renault R16, R12TS
R5 (1,0L to year of construction 11/1977), Alpine A110. Piston diameter: 19,0mm. Brake line connector: 3x 3/8 x 24UNF. Or. No. 700548977. Made in Europe.
R16/R15/R17, thrust washer (thrust bearing) crankshaft. Standard size. Suitable for Renault R16
R15, R17. Renault Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16R15/R17, crankshaft bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16R15/R17, crankshaft bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. diameter: 54,8mm, width: 20,50mm. Reproduction from the EU.
R16R15/R17, connecting rod bearing set. 0,25 oversize. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R16R15/R17, connecting rod bearing set. Standard size. Suitable for Renault R16, R15, R17. Renault
Alpine (4 cylinders), Fuego, R20, Trafic. Engines: 697/807/821/843. Reproduction from the EU.
R20/R30/Alpine, clutch master cylinder sealing set 19mm. Suitable for Alpine starting from 01/1076
6, R20, R25, R30 all models.
R20/R30/Alpine, clutch taking cylinder sealing set 28,6mm. Suitable for Alpine starting from
01/1076, R20, R25, R30 all models.
R4/rear engine, master brake cylinder sealing set. For piston diameters: 3/4 inch. Suitable for
early Renault R4. Renault 4CV, Dauphine, Floride, Caravelle, R8, R10.
R4/R5, Lucas + Bendix brake caliper: guide sleeve set. Suitable for Lucas Girling + Bendix brake
caliper. This repair kit is suitable for the following vehicles: Renault R4, R5, Clio 1, Espace 1+2, Twingo 1, Super 5, R9, R11, R18. Alpine V6 1 (1985>1992), Fuego. Citroen C25 + Peugeot J5, Peugeot 205.
R4/R5, bonded-rubber bushing (2 fittings) for the bearing of the rear axle rocker. Suitable for
Renault R4, R5, R6, Alpine A110. Inside diameter: 34mm. Outside diameter: 50mm. Length inside: 45mm. Length outside: 39,5mm.
R4/R5/R6/R8/R12, camshaft drive chain, 58 chain links, for Renault R4 R5/R6 R8/R12/TWINGO. Engines
C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700. Wide one: 1 chain link. (Simplex)
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm
diameter. 0,25 oversize. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.
R4/R5/R8/R10/Estafette, crankshaft bearing (5 bearings, C = Cleon). For crankshafts with 44mm
diameter. Standard size. Suitable for Renault engines: 688, 689, 804, 810, 812. For engines until 1974! From 1975 on crankshafts with 54,8mm diameter were used.
R4/Estafette/Caravelle, connecting rod bearing set, 1 oversize (+0,25). Wide one: 20,75mm. Suitable
for Renault engines (5 crankshaft bearings, Cleon) 688 172,688,1 + 688.01 to year of construction 1975 (1108cc). All other engines 689 710 / C1C 700 (956cc) + 688 711 + 713. C1E 700, 754, 715, 720, 750 (1108cc). 813-02 (852cc). These engines were used in Renault R4, R4F4, R4F6, etc.
R4/Estafette/Caravelle, connecting rod bearing set, standard dimension. (43.965 - 43,980mm). Width
20,75mm. Suitable for Renault engines (5 crankshaft bearings, Cleon) 688 192 + 688 1 (1108cc) starting from year of construction 1975. Engine 810 01 to 810 29 (1289cc). 810 96 + 810 97 (1289cc). C1G + C1J (1397cc). These engines were used in Renault R4, R4F4, R4F6, etc.
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,25 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. 0,50 oversize. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette. R16 (all),.....
R4/R5/R8/R10/Estafette/Caravelle, connecting rod bearing set. Width: 17.70mm. Standard size. Fits
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......
R4, R8, Alpine, camshaft drive chain set, 58 chain links (simple - simplex chain), suitable for
Renault R4, R8, Alpine 1300. Consisting of: Camshaft drive chain, chain pinion for crankshaft + camshaft, gear seal cap.
R5 Alpine Turbo, drive shaft. Suitable for Renault R5 Alpine Turbo, built between 1977 and 1984
(fits left and right). Length: 620mm. New part. Item no. 7701348141
R5 Alpine Turbo, battery plate (battery console), made of stainless steel. Suitable for Renault R5
Alpine Turbo. Made in Germany
R5 Alpine Turno, front floor mat set Velour Exellence (only front left + right), beige with beige
vinyl border trim. Suitable for Renault R5 Alpine Turbo, from year of construction 01/1978 to 12/1984 Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.
R5 Alpine Turbo, front floor mat set Velour Exellence (only front left + right), blue with orange
vinyl border trim. Suitable for Renault R5 Alpine, from year of construction 01/1978 to 12/1984. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.
R5 Alpine Turbo, front floor mat set Velour Exellence (only front left + right), dark grey with
light grey (Gris clair) vinyl border trim. Suitable for Renault R5 Alpine Turbo, from year of construction 01/1978 to 12/1984. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.
R5 Alpine Turbo, front floor mat set Velour Exellence (only front left + right), light grey (Gris
clair) with dark grey (Gris foncé) vinyl border trim. Suitable for Renault R5 Alpine Turbo, from year of construction 01/1978 to 12/1984. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.
R5 Alpine Turbo, front floor mat set Velour Exellence (only front left + right), red with red vinyl
border trim. Suitable for Renault R5 Alpine Turbo, from year of construction 01/1978 to 12/1984. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.
R5 Alpine Turbo, front floor mat set Velour Exellence (only front left + right), black with dark
grey (Gris foncé) vinyl border trim. Suitable for Renault R5 Alpine, from year of construction 01/1978 to 12/1984. Very good carpet quality (weight 2000g per square metre). Made in France. Very nicely finished.
R5 Alpine Turbo, piston + liner (4 item). Suitable for Renault R5 Alpine Turbo. Engine: 840.26
Engine capacity: 1397cc. Bore: 76mm. Piston pin: 20 x 62mm. Piston rings: 1,75 + 2 + 4,0mm. Outside diameter down: 80,60mm. Outside diameter above: 90,10mm. Height totally: 134mm.
R5 Alpine Turbo, piston + liner (4 fittings). Suitable for Renault R5 Alpine Turbo. Engine: CI J
782/760. Engine capacity: 1397cc. Bore: 76mm. Piston pin: 20 x 63,50mm. Piston rings 1.75 + 2 + 4,0mm.
R5 Alpine Turbo, radiator in aluminium. Suitable for Renault Alpine Turbo. The radiator is
handmade. The appearance is not identical to the original radiator! Aluminium radiators have a significantly higher cooling capacity than the standard radiator (which is why they are also used in motor sports!).
R5 Alpine Turbo, radiator hose set. Consisting of 7 radiator hoses. Suitable for Renault R5 Alpine
Turbo. Made of silicone (very good durability).
R5 Alpine Turbo, gear knob as original! Same dimensions, same font as original, covered with
high-quality imitation leather (all handmade). Suitable for Renault R5 Alpine Turbo.
1035 Articles | Page 14 of 21
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
