engine cooling for Renault Mehari
32 Articles
Grid for the engine fan case (602cc). Suitable for Citroen 2CV6, Dyane 6, Mehari. Very good
reproduction. Securement with 4 screws.
Grid for the engine fan case. Suitable for Citroen 2CV6. Reproduction. The grid is galvanized
Securement with 4 screws
Elastic strap with 2 hook loops, length 112 mm (measured from hook to hook). Length including
hooks: 160 mm. This elastic strap is suitable for a wide range of uses. We've been looking for something like this for ages. For example, for securing radiator expansion tanks, air filters, jacks, securing items in the boot, and so on.
Radiator Fin Straightener. Designed for straightening fins and removing debris from vehicles
radiators and air conditioning condensers. One tool with 6 different combs works on any vent or grill. The use of this tool allows the radiator or air conditioning grill to work correctly. Also use on air conditioning grills. Also suitable for oil and water radiators/condensers and evaporators
Fan blade for 2CV6, 9 blades (Or. No. 5433422 or AM241904), Mounted with 6 screws. Outer diameter
265 mm. Inner diameter: approx. 175 mm. Bolt circle: approx. 160 mm. Unfortunately, the quality of this fan blade is not particularly good. Slightly thicker screws may sometimes be required for fitting. The advantage of these fan blades is that they are readily available (the good-quality reproductions are not always in stock) and very low-priced. And once fitted, they work just as well.
Fan blade for 2CV6, 9 vanes, color black. Original supplier. Securement with 6 screws. Outside
diameter 265mm. Diameter inside: 177mm. Pitch diameter: 162mm.
Screw set suitable for the engine cooling system, for Citroen 2CV6. Contants all screws and nuts to
mount the casing sheets and die sealing behind the oil cooler.
Tie-clip for the engine cowling sheet metal, for Citroen 2CV (8 per side are required. (to it
suitable screw = 20170)
Engine cowling around the liner, above on the left (air circulation). Material sheet metal
Suitable for Citroen 2CV6
Engine cowling around the liner, above on the right (air circulation). Material sheet metal
Suitable for Citroen 2CV6
Belt pulley (without fan blade + V-belt), better than original (Made by Franzose). Suitable for
Citroen 2CV6, Dyane, Mehari. The belt pulley has been rotated from a 18kg steel block DIN 1,0501 (AISI/SAE 1040, EN C35). Fine balanced pulley, thus avoiding much pressure on the crankshaft. No risk of tearing off as it is not welded. Belt pulley is yellow galvanised (like original). Made by Franzose/Cipere, entire production process in Europe.
Belt pulley, screw for the securement of the belt pulley on the crankshaft. Suitable for Citroen
2CV, with generator propulsion over V-belts. (2CV6 + 2CV4)
Hose clamp 11-17mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 13-20mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 15-24mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 19-28mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
Hose clamp 22-32mm, especially for radiator hose. Vintage look. Embossed band with raised edges
This prevents the hose from being damaged. Small screw housing with 7mm hexagon head screw (with slot). Normal, modern hose clamps squeeze the hose. This is completely avoided with these clamps. And they even look better.
32 Articles
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
