for Renault R4
1993 Articles | Page 23 of 40
Trunk lock (handle). Suitable for Renault R4 + R4L. The luggage compartment handle is beige
painted. Or. No. for the luggage compartment handle: 7701460762
R4, Tailgate lock interiorlaterally. Suitable for Renault R4. Depending upon version, the mounting
in the lock must be up-filed around 0,25mm, so that the striker plate can engage.
R4, Fender securement edge (repair sheet metal), in front on the left (upper section). Suitable for
Renault R4. Made in Europe.
Fender securement edge (repair sheet metal), in front on the right (upper section). Suitable for
Renault R4. Made in Europe.
R4, Fender securement edge (repair sheet metal), at the rear left (at the body) amount about: 9 cm
Suitable for Renault R4. Made in Europe.
R4, Fender securement edge (repair sheet metal), at the rear right (at the body) amount about: 9
cm. Suitable for Renault R4. Made in Europe.
R4, rear mudguard: Rivets (blind rivets with large head) for fixing the rear mudguards, to the C +
D pillar. Fastening catch cable for the bonnet. Suitable for Renault R4.
R4, plastic bushing on the stabiliser bar suspension outside. Suitable for Renault R4. This plastic
bushing is pushed onto the suspension with the long metal tube and prevents the bracket from buckling too much on the stabiliser bar. Inner diameter: 16.5mm. Outer diameter: 25mm. Overall length: 25mm. Or. No. 7705002001
R4, ventilation grille under windscreen (old model, plastic). Suitable for Renault R4, until year
of construction 1983. Or. No. 7700690152. Made in Europe
PDF FILE R4, ventilation grille (without rear flap) under windscreen (new model, plastic). Suitable for
Renault R4, from year of manufacture 1983. Or. No. 7700643583. Made in Europe. This grille is as neatly finished as our number 87923!
R4, ventilation grille (with rear flap) under windscreen (new model, made of plastic). Suitable for
Renault R4, from 1983 onwards. Very good reproduction. Or. No. 7700643583. Made in Europe
Bearing for the V-belt tensioner. Suitable for Renault R4. Brand manufacturers. Inside diameter: 15
mm. Outside diameter: 35 mm. Wide one: 11 mm
R4, bearing for V-belt tensioner, retaining ring largely for the bearing. Suitable for Renault R4
Size: 36mm. The retaining ring is required 2x per bearing.
R4, bearing for V-belt tensioner, retaining ring small for the bearing. Size: 14mm. The retaining
ring is required 2x per bearing.
R4, steering gear (new section). Suitable for Renault R4, starting from year of construction 1979
(inclusive tie rods). Please, grease the steering gear, before you mount it.(about 60g)
R4, Steering gear adjusting washer. Dimension 8.9mm. This adjustment washer is for the correct
alignment of the steering gear (so that there is no tension). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4. Or. No. 7700555563
R4, Steering gear adjusting washer. Dimension 9.9mm. This adjustment washer is for the correct
alignment of the steering gear (so that there is no tension). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4. Or. No. 7700555564
R4, Steering gear adjusting washer. Dimension 10.9mm. This adjustment washer is for the correct
alignment of the steering gear (so that there is no tension). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4. Or. No. 7700555565
R4, Steering gear adjusting washer. Dimension 11.9mm. This adjustment washer is for the correct
alignment of the steering gear (so that there is no tension). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4. Or. No. 7700555566
R4, Steering gear adjusting washer. Dimension 12.9mm. This adjustment washer is for the correct
alignment of the steering gear (so that there is no tension). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4. Or. No. 7700555567
R4, Steering gear adjusting washer. Dimension 13.99mm. This adjustment washer is for the correct
alignment of the steering gear (so that there is no tension). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4. Or. No. 7700555568
R4, Steering gear adjusting washer. Dimension 14.99mm. This adjustment washer is for the correct
alignment of the steering gear (so that there is no tension). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4. Or. No. 7700555569
R4, steering gear. Suitable for Renault R4, from year of construction 1969 > 1979. Please, grease
the steering gear, before you mount it.(about 60g).
Collar steering gear. Suitable for Renault R4, to year of construction 06/1979. Renault R5 + R6
Reproduction. Openings about: 34 + 24mm.
R4, collar steering gear (reproduction). Suitable for Renault R4, starting from year of
construction 06/1979. Renault R5, R6, R14. Mounting diameter: about 34 + 10mm.
R4, Collar steering gears (original Renault). Suitable for Renault R4, to year of construction
06/1979. Renault R5 + R6. Openings about: 34 + 24mm. Or. No. 770554294
R4, light-turn-horn switch (steering box switch). Suitable for Renault R4, starting from year of
construction 07/1982. Or. No. 7701349718
R4, collar on the gearbox, for the seal gear lever (for gearbox 354 + 328). Diameter: 11mm + 35mm
Height: 21mm. Suitable for Renault R4 + R6. Or. No. 7700520704.
R4, Middle part of the splash wall in front at the chassis. Suitable for Renault R4. The sheet
metal is electrolytically galvanized. Made in Europe.
R4, Engine gasket set completely, inclusive shaft seals. Engine: 813. Suitable for Renault R4 FASA
(852cc), of year of construction 1972 to 1975. Bore: 61,4mm.
R4, engine gasket set completely, without shaft seals. Engine: 680, 839-06. Suitable for Renault R4
(747cc, 782cc, 845cc), from year of construction 1961 to 1982. Bore: 49 + 54.5 + 55,8 + 58mm.
R4, Engine mounting (cross-beam completely) in front on the left at the chassis. Suitable for
Renault R4. The sheet metal is electrolytically galvanized. Made in Europe.
R4, Engine mounting (cross-beam completely) in front on the right at the chassis. Suitable for
Renault R4. The sheet metal is electrolytically galvanized. Made in Europe.
R4, engine mount (only the lower section of the complete cross-beam) at the front left of the
chassis. Suitable for Renault R4. Reproduction
R4, engine mount (only the lower section of the complete cross-beam) at the front right of the
chassis. Suitable for Renault R4. Reproduction
R4, Engine suspension, in front on the left. Suitable for Renault R4 (R1123, R1126, R1129, R2106
R2391, R2392), of year of construction 1976 to 1982. R4 (R1123, R2106, R2391) starting from year of construction 1983. Renault R6, to year of construction 1970.
R4, bonnet catch cable (bonnet stop when opened). Suitable for Renault R4. Completely made of
stainless steel! Made in Germany. Or. No. 7700533524
R4, Bonnet, for angular indicators. The bonnet does not have a ventilation louver under the
radiator grill. Suitable for Renault R4. The bonnet can have light dents, since it comes from a production of the eighties. Shipping only by freight forwarder.
R4, Bonnet, for angular indicators. The bonnet have a ventilation louver under the radiator grill
Suitable for Renault R4. The bonnet can have light dents, since it comes from a production of the eighties. Shipping only by freight forwarder.
R4, Rubber buffer for the bonnet. Suitable for Renault R4. Diameter: 22,58mm. Height: 11,21mm
Mounting hole centrically: 5,0mm.
1993 Articles | Page 23 of 40
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
