44HP). Bore: 65mm. Piston pin: 18 x 57mm. Piston rings: 1,75 + 2.0 + 3,5mm. Outside diameter down: 75,50mm. Outside diameter above: 85,80mm. Height totally: 135,0mm
956cc. Piston rings: 1,75 + 2.0 + 3,5mm.
(1123,1128,112C). Also for Renault R5, R9, R12, 21, SUPER5
you always have the right washer. These shims are for the correct alignment of the steering gear (to avoid distortion). See the workshop manual! There are 7 different adjusters! Suitable for Renault R4 + R5. Or. No. 7700555563 to 7700555569
Renault R4, from 1979 to 1986. Renault R5. Or. No. 7701348654
for Renault R4 and R5 (engine 688, C1E + CIC, cubic capacity 956cm³ + 1108cm³). This screw is mounted at least 2x in the engine block. For complete draining of the coolant from the engine, this screw can be unscrewed! Or. No. 7703075009
(852cc), starting from year of construction 1972 (FASA). Renault R5 TL (R1222-2382), 950cc. Of year of construction 1972 to 1975. Bore: 61,4mm.
1108cc). Suitable for Renault R4. Renault R5 TL. Bore: 65 + 70mm.
year of construction 1974. Renault R5 (type 354 - HA0). Or. No. 7700532957
Suitable for Renault R4 (R1128 starting from 07/1982, R112C starting from 7/1986, R2340 + 2430 starting from 10/1977). Renault R5 TL, TS, GTL, LS, Alpine. Renault R6. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24UNF. Mounting board bore: 32mm. Length: 59mm. Made in Europe.
Suitable for Renault R4, to chassis number 21494 (year of construction 9/1963 to 8/1978). Renault R5. Piston diameter: 19,05mm. Brake line connector:3/8 24UNF. Mounting board bore: 31mm. Length over everything: 56mm. Made in Europe.
Suitable for Renault R4 (1108cc, R1128, S128, R2370, 210B). Renault R5, from 1/1972 to 12/1985. Piston diameter: 22,2mm. Brake line connector: 3/8 x 24 UNF. Mounting board bore: 32mm. Or. No. 7701024260
(R1123, R1126, R1129), of year of construction 7/1966 to 1985. R4 Fougnette, of year of construction 7/1966 to 1986. Renault R5, of year of construction 1972 to 1984. Piston diameter: 23,8mm. Brake line connector: 3/8 x 24UNF. Mounting board bore: 32mm. Length over everything: 72mm. Made in Europe.
(R1123, R1126, R1129), of year of construction 7/1966 to 1985. R4 Fougnette, of year of construction 7/1966 to 1986. Renault R5, of year of construction 1972 to 1984. Piston diameter: 23,8mm. Brake line connector: 3/8 x 24UNF. Mounting board bore: 32mm. Length over everything: 72mm. Made in Europe.
for Renault R4, R5, R6. Fits Renault R4 FASA vehicles! Or. No. 7700580524
for Renault R4, R5, R6. Not suitable for FASA R4! Or. No. 7701455251
Also fits on Renault R4 (but is relatively unknown). As original, but with additional dust boot (better sealing). The middle plastic ring is made of self-lubricating plastic. Or. No. 7700560542 + 7700560543 + 7700560544
plastic bushings are not needed! Or. No. 7700532414 + 7700520531
fork mounting. (Support of lower wishbones). Per piece. Or. No. 7700500113
Renault R4, R5, R6, Alpine A110. Inside diameter: 34mm. Outside diameter: 50mm. Length inside: 45mm. Length outside: 39,5mm.
R6, R18, R20. The tie rod fits on the left + on the right. Thread for the tie rod: M14 x 1,5. Or. No. 7701460955 Made in Italy
10,1mm. Metal sleeve lengthens: 32mm. Or. No. 7702003408
10,1mm. Metal sleeve lengthens: 51mm. Or. No. 7702107984
12,1mm. Metal sleeve lengthens: 32mm.
12mm. Metal sleeve lengthens: 51mm. Or. No. 7702107985
clip, 2x rubber bush for clip, 2x hanging up rubber outside. Metal sleeve length = 32 mm. Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter
2x rubber bush for clip, 2x suspension rubber outside (Metal sleeve = 32mm). Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter
TWINGO. Engines: C, C1C, C1E, 680, 688, 810, 813, 839, 899, 810-02, C3G700.
09/1968 and 1992. R4 F4 + R4 F6 from 1968 to 1992. Renault R5, built between 1972 and 1985. Renault R6.
1992. R4 F4 + R4 F6 from 1968 to 1992. Renault R5, of year of construction 1972 to 1985. Renault R6. Manufacturer "Record France"
(S128, R112C, R1128, R210B, R2370, R2398), Renault R5. For vehicles that have a fuel pump with 3 hose connections. Attention: Vehicles were produced in the same period which may or may not have a fuel return. Please check on your vehicle. Or. No. 7701349130
of construction 1979 to 1992. Pin amount to area for screwing: 62mm. Thread height: 19mm. Thread measurement: M12 x 1,25.
of construction 1979 to 1992. Pin amount to area for screwing: 62mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 7701463687
bolting of the suspension and guide joints on the front axle. Per piece.
845cc. Installed from 10/1962 to 07/1989. Outside diameter: 61mm. Inside diameter: 25mm. Amount: 26mm. Or. No. 7701348994. Original supplier.
mounting a pin! Engines 1108cc + 956cc. Installed by the R4 from 06/1978 to 06/1990. By R5 from 01/1972 to 12/1985. Or.Nr. 7700655335
65.0 + 70,0mm. Suitable for Renault R4. Renault R5 TL-GTL (1972 - 1985). R6, Estafette
construction 10/1962 to 12/1989 (R2102, R2104, R2105, R2106, R2391, R1120, R1122, R1123, R1124, R1126). Renault R5 (R1221, R1391, R122o), of year of construction 10/1972 to 12/1984. Or. No. 7701348088
688.02/10/11,688, C1E (1108ccm). Standard dimension
CIC700/6/8/54, CIE700, CIE 714/15/28/19. Engine capacity: 956cc, 1108cc, 1237cc, 1397cc. Suitable for Renault R4, R8, R10, Super5, Clio, R11. Or. No. 0852937800
CIC700/6/8/54, CIE700, CIE 714/15/28/19. Engine capacity: 956cc, 1108cc, 1237cc, 1397cc. Suitable for Renault R4, R8, R10, Super5, Clio, R11. Or. No. 7700860636
mounting centrically has a projection!
22,2cm. Outside diameter: 24,7cm. Thickness: 0,8cm.
actuation (on the rear axle). The bolt is threaded and the tractive force is adjusted via 2 nuts. This bolt is suitable for the brake power controller with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700506146 + 6001003791
controller with 3 and 4 lines! The brake power controller is suspended from this spring! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514841
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
