Search in Renault-R4 for

R4/R5, fuel sender (last version), with fuel return. For bayonet mount

Suitable for Renault R4 (S128, R112C, R1128, R210B, R2370, R2398), Renault R5. For vehicles that have a fuel pump with 3 hose connections. Attention: Vehicles were produced in the same period which may or may not have a fuel return. Please check on your vehicle. Or. No. 7701349130

R4/R5, ball and socket joint lower on the left. Suitable for Renault R4 + R5

Installed from year of construction 1979 to 1992. Pin amount to area for screwing: 62mm. Thread height: 19mm. Thread measurement: M12 x 1,25.

R4/R5, ball and socket joint lower on the right. Suitable for Renault R4 + R5

Installed from year of construction 1979 to 1992. Pin amount to area for screwing: 62mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 7701463687

R4/R5, cylinder head gasket. Engine: 680, 800 B1B, 839. Suitable for Renault R4

(845cc), of year of construction 10/1962 to 12/1989 (R2102, R2104, R2105, R2106, R2391, R1120, R1122, R1123, R1124, R1126). Renault R5 (R1221, R1391, R122o), of year of construction 10/1972 to 12/1984. Or. No. 7701348088

R4/R5/R16, brake power controller - connecting bolt (regulating rod) for brake

load-dependent actuation (on the rear axle). The bolt is threaded and the tractive force is adjusted via 2 nuts. This bolt is suitable for the brake power controller with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700506146 + 6001003791

R4/R5/R6, master brake cylinder, single circuit brake system. Brake system

Bendix. Suitable for Renault R4 (R1123), to year of construction 1976. Renault R4 (R1129) from 1976 to 1978. Renault R4 F4 (R2391, R2392), of year of construction 1971 to 10/1976. R4 F6 (R2370, R2340), of year of construction 4/1975 to 10/1976. Renault R5 (0,8) from 10/1972 to 12/1984. R6 from 10/1969 to 4/1980. Piston diameter: 19,05mm. Brake line connector: 3x 3/8x24UNF. Made in Europe.

R4/R5/R6, master brake cylinder, suitable for Renault R4 to Ident No. 1109666

(vehicles with front drum brake). Renault R5 0,8L, of year of construction 10/1972 to 08/1984. Renault R6, of year of construction 10/1969 to 04/1980. Piston diameter: 22mm. Brake line connector: 3x 3/8x24 UNF + 1x at the front side 7/16x20 UNF. The actuating piston has a bore with 11mm diameter and about 40mm deep.

R4/R5/R6, engine suspension in front on the left. Suitable for Renault R4

(R1128, R2370, R2430), of year of construction 1976 to 1982. R4 (R1128, R112C, E210B, 2370, R239B, RS128), starting from year of construction 1983. R5. R6, starting from year of construction 1970.

R4/R5/R6, engine suspension in front on the right. Suitable for Renault R4

(R1128, R2370, R2430), of year of construction 1976 to 1982. R4 (R1128, R112C, R210B, R2370, R239B, RS128), starting from year of construction 1983. R5. R6, starting from year of construction 1970.

R4/R5/R6, ball and socket joint down on the left, for Renault R4 + R5, R6

Installed from year of construction 1968 to 1979. Pin height to area for screwing: 58mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No. 7701450635

R4/R5/R6, ball and socket joint down on the right, for Renault R4 + R5, R6

Installed from year of construction 1968 to 1979. Pin height to area for screwing: 58mm. Thread height: 19mm. Thread measurement: M12 x 1,25. Or. No.: 7701450637

R4/R5/R6/Dauphine, piston rings, for 4 pistons. Suitable for Renault R4, R6

R6, Dauphine. Engine: 800/10, 800/01, 800/02. 800/A7. Engine capacity: 845ccm. Bore: 58,0mm. Piston rings: 1,75 + 2,0 + 3,5mm.

R4/R5/R6/R16, ball and socket joint above, for Renault R4, R5, R6. On the left

on the right fitting. Installed starting from year of construction 1969. Renault R16 Installed of year of construction 9/1965 to 8/1980. Renault R12 starting from year of construction 1969. Original quality. Pin height to area for screwing: 55mm. Thread measurement: M10 x 1,25. Or. No. Or. Nr. 0996064400

R4/R5/R6/R8/R10, piston + liner (4 item). Suitable for Renault engine with

engine capacity: 1108cc (34 to 53 HP). Engine: 688/C1E. Bore: 70,0mm. Compression: 9,5: 1. Shank measurement: 85,8mm (engine mount bore). Piston pin: 18 x 62mm. Piston rings: 1,75 - 2.0 - 3,5mm. Suitable for Renault R4 GTL, R4 F6, R5 TL + GTL, R6 tl, R8 Major/S, R10, Estafette. Outside diameter down: 75,44mm. Outside diameter above: 85,80mm. Height totally: 135,0mm.