Search in Renault-R4 for
1946 Articles | Page 32 of 39
Wheel bearing. Suitable for Renault R4, R5, R8, R10. Peugeot 104. Citroen LNA
Dimension:: 40 x 17 x 13,25mm. Made in Spain
Rear wheel bearing set (original equipment quality). Suitable for Renault R4
4. R5, R6, R8, Dauphine, R16 all models from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: 47x25x15 mm. Bearing 2: 42x20x15 mm. Or. No. 7701460642.
Rear wheel bearing set (replica). Suitable for Renault R4. R5, R6, R8
Dauphine, R16 all models from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: Outside diameter: 47,0mm. Inner diameter: 25,0mm. Overall height: 15,0mm. Bearing 2: Outside diameter: 42,0mm. Inner diameter: 20,0mm. Overall height: 15,0mm. Or. No. 7701460642
Wheel bearing set of rear axle, suitable for Renault R4, R5, R16, R17. Bearing
1: Outside diameter 47mm, inside 20,0mm, wide one 15,25mm. Bearing 2: Outside diameter 52mm, inside 25mm, wide one 16,25mm. Dimension shaft seal: Outside diameter 58mm, inside 48mm, height of 4mm. Made in Spain
Wheel bearing set of rear axle. Suitable for Renault R4, R6, R16. Dimension
bearing 1: Outside diameter: 47mm. Inside diameter: 19,80mm. Wide 12,00mm. Dimension bearing 2: Outside diameter 52mm. Inside diameter: 25mm. Wide 13,00mm.
Wheel bearing set rear. Suitable for Renault R4, R5, R6, R8, Dauphine
Dimension bearing 1: 40 x 17 x 13,25mm. Bearing 2: 47 x 22 x 20,75mm. Shaft seal. Made in Spain
Rear wheel bearing set. Suitable for Renault R4, from 09/1962 to 06/1986. R5
from 01/1972 to 06/1984. R6 from 10/1968 to 04/1980. Renault Dauphine, R8, R10, Alpine A110. Dimension bearing 1: 40 x 17 x 13,25mm. Bearing 2: 47 x 22 x 20,75mm.
Wheel bearing set front. Suitable for Renault R4, R5, R6. Dimension bearing 1
62 x 30 x 16. Bearing 2: 62 x 30 x 16mm. Original equipment quality.
Wheel bearing set for the front axle, suitable for Renault R4, R5, R6
Consisting of 2 wheel bearings. Dimension bearing 1: Outside diameter 62,0mm. Inside diameter 30,0mm. Wide 16,0mm. Dimension bearing 2: Outside diameter 62,0mm. Inside diameter 30,0mm. Wide 16,0mm. Note: These bearings do not have an O-ring!
Wheel bearing set for the front axle, suitable for Renault R4, R5, R6
Consisting of 2 wheel bearings. Dimension bearing 1: Outside diameter 62mm. Inside diameter 30mm. Wide 16mm. Dimension bearing 2 with O-ring: Outside diameter 62mm. Inside diameter 30mm. Wide 16mm. Made in Spain
Wheel nut short. Suitable for Renault R4 + R6. Thread: M10 x 1.25, wrench
17mm. Or. No. 7700636440, 0555486900, 7700610483. Made by Franzose / CiPeRe
Wheel nuts for rim Alpine Design (12 pieces). Thread: M10 x 1.25. Depth of the
e thread: 26mm. Wrench: 19mm.
The brake-down aid for on the road. SONAX TyreFix restores driveability to flat
tyres, without tyre change. Seals small holes in the tyre and pumps it up. Practical, fast and safe. 400ml
Tire valve adapter of TR13 (13mm) on TR15 (15mm). This adapter is required, if
you have old rims, with 15mm hole for valves. New valves are always 13mm in the diameter.
Repair manual body. Suitable for Renault R4. Reprint of the original Renault
manual (M.R.176). 185 sides. Language: German.
Rodeo, (1108cc), exhaust silencer in front. Suitable for Renault Rodeo, of year
of construction 1971 to 1992. Connection: 40,5 + 29,5
Rosette nickel plated. For 4mm screw. Outside diameter: 11mm. Height: 2,4mm
These rosettes were used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault.
Rosette nickel plated. For 4mm screw. Outside diameter: 12,7mm. Height: 2,5mm
These rosettes were used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault.
Rosette nickel plated. For 5mm screw. Outside diameter: 13mm. Height: 3,0mm
These rosettes were used for dashboard, door linings. Suitable for Citroen 2CV, DS, HY and in many Peugeot + Renault.
Back-up light reproduction (Hella), the housing is made of plastic. Width
120mm, height of 70mm. The headlamp is for a later mounting underneath the bumper! It cannot be used as substitute for the original backup lights from R4! Lampholder for the bulb: Ba15s. Maximum 21Watt. (Our number 14035 + 14045).
Taillight cap red (original AXO, with "E" test mark). Suitable for Citroen AK
Citroen DS BREAK. HY, Mehari. Wide light collar. Outside diameter 71mm, mounting holes center to center about 55mm, collar level from the inside measured: 14,5mm. We could buy up some thousand caps. No reproduction (NOS).
Taillight cap red (original SEIMA, with test characters). Suitable for Citroen
AK. Citroen DS BREAK. HY, Mehari. Narrow light collar. Outside diameter 68mm. Mounting holes center to center about 58mm. Collar level from the inside measured: 10,0mm. We could buy up some thousand caps. No reproduction (NOS).
Reflector square, framed in metal. With fixing straps, dimensions approx
60x45mm. These reflectors were used in many French cars!
Scrapers professional version, to remove of labels on disks, engine sealing
g remainders scrape etc. off.
Switch - push button, square, with chrome frame. Universally suitable. Please
note: this is a push button and not a toggle switch. The push button is useful for electric windscreen washers, horns or headlight flashers, for example. Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Square switch with chrome frame. The switch also has an indicator light (bulb
base Ba9s). Universal switch for e.g. heater blowers, additional consumers.... Dimensions: 36x18mm (French standard size). Suitable for Peugeot, Citroen, Renault.
Switch for the reversing lamp. Suitable for Renault R4, R5, R6, R16. Thread
M16 x of 1,0. 2 electric plug contacts.
Foam material plates (2 fittings) 15mm thick, 1200x600mm. Universal for seats
carpet, door linings etc.
Foam material plates (2 fittings) 15mm thick, 580x580mm. Universal for seats
carpet, door linings etc.
Discs (windscreen) Pull-in tool (cord with handle). This is used to pull the
rubber lip of the seal over the sheet metal fold. Very helpful!
Windscreens (windscreen) piping assembly tool - bracket inserts. For small
piping. There are 5 brackets in different widths so that narrow and wide piping can be fitted (e.g. for the 2CV, R4....). Suitable for tool with item number 20134.
Windscreen Installation Tool Set. Windshield sealing trim assembly tool. With
this tools will the rubber lip (seal) inclination (spread) and it can fit the sealing trim at the same time. Attention: The tool is for very wide piping. For chrome piping e.g. Citroen 2CV, Renault R4 etc. small brackets must be fitted. See our item number 20137.
Permanently elastic window sealant. Original Teroson! 75ml tube. Application
Ideal for sealing rubber-mounted front, rear and side windows. Very stable, water resistant, remains elastic. Good adhesion even on damp windscreens.
1946 Articles | Page 32 of 39
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
