41,138mm). Wide one: 21,16mm. Suitable for Renault engines: 662, 690, 680 702, 839 706, 670, 800 710, B1B. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. Suitable for Renault R4, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³). For piston rod pins: 38,00mm.
Renault engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,75mm. Suitable fpr R4, R5, 4CV, Dauphine, Dauphinoise, Juvaquatre, R5 (782cm³), Floride, Estafette (747cm³)
engines: 662, 690, 680,702, 839 706, 670, 800 710. (603cc, 748cc, 782cc, 845cc). Installed from year of construction 1951 to 12/1985. For piston rod pins: 37,50mm.
R4 F4, R4 F6, R6. The 16mm stabilizer was originally only used for R4 F4 + R4 F6. However, it can be fitted to the saloons without any problems. The thicker stabiliser gives a slightly firmer ride. Mady in Europe
Reservoir amount with locking cap: 97mm. Threaded connection on the master brake cylinder: M16 x 1,5.
early Renault R4. Renault 4CV, Dauphine, Floride, Caravelle.
diameters: 19mm. Suitable for Renault R4, starting from year of construction 1970. Renault R16 + Estafette.
of year of construction 1976 to 1986. Renault R16 TL, of year of construction 01/1971 to 12/1976. Renault R5, Renault R12. Or. No. 770685455. Attention, there are also vehicles with 3x 3/8 + 1x 7/16 connection. For these purposes we have a suitable adapter (84372) in our delivery programme.
Renault R4 + R5. Piston diameter: 45mm. Or. No. 7701201168.
Renault R4 + R5. Piston diameter: 45mm. Or. No. 7701201169.
construction 1969 to 1986. Renault R5L + R6. Engine: 800 B1B, 800 10 02/03/01/05. Engine capacity: 845cc. Compression: 8: 1. Piston pin: 16 x 49mm. Piston rings 2,0/2,0/3,5. Outside diameter down: 62,50mm. Outside diameter above: 69,80mm. Height totally: 126,0mm. Mounting with paper seal for the liners (no copper seal)
839. Engine capacity: 782cm ³. Bore: 55,80mm. Piston pin: 16 x 46mm. Piston rings: 1,75 + 2.0 + 3,5mm.
clip, 2x rubber bush for clip, 2x hanging up rubber outside. Metal sleeve length = 32 mm. Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter
2x rubber bush for clip, 2x suspension rubber outside (Metal sleeve = 32mm). Note: The rubber bush for fixture anti roll bar at the body has always about 15-16mm diameter
actuation (on the rear axle). The bolt is threaded and the tractive force is adjusted via 2 nuts. This bolt is suitable for the brake power controller with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700506146 + 6001003791
controller with 3 and 4 lines! The brake power controller is suspended from this spring! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514841
with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700629722 + 7700629723
is suitable for the brake power controller with 3 and 4 lines! Suitable for Renault R4, R5 TS + TL, R16. Or. No. 7700514080
for Renault R4, starting from year of construction 1968. Renault R16, all model`s. Renault R5 TS + TL, R6
R14, R16, R18, R19, Espace. Or. No. 7700828623
R14, R16, R18, R19, Espace.
for Renault R4 (1108ccm), R5, R6, R9, R11, R14, R16, R18, R19, Espace.
drum brake). Renault R5 0,8L, of year of construction 10/1972 to 08/1984. Renault R6, of year of construction 10/1969 to 04/1980. Piston diameter: 22mm. Brake line connector: 3x 3/8x24 UNF + 1x at the front side 7/16x20 UNF. The actuating piston has a bore with 11mm diameter and about 40mm deep.
Suitable for Renault R4, R5, R6, R12, R16. Inside diameter: 10mm. Construction length inside: 28mm. Outside diameter: 28mm. Construction length outside: 20mm.
Renault R4 (Fasa), R5, R6, R16. Brake line connector: 3x 3/8x24UNF. Made in Europe.
fitting. Installed starting from year of construction 1969. Renault R16 Installed of year of construction 9/1965 to 8/1980. Renault R12 starting from year of construction 1969. Original quality. Pin height to area for screwing: 55mm. Thread measurement: M10 x 1,25. Or. No. Or. Nr. 0996064400
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),....
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette. R16 (all),.....
Renault engines (5 crankshaft bearings, Cleon) with 54.8mm + 44mm diameter. Engines: 688 192 + 688.1 (1108cc). Engine 810.01 to 810.29 (1289ccm). 810.96 + 810.97 (1289ccm). 810 725, 810 726, 840 730, C2J 713, 8347 725.... C1G + C1J (1397ccm). Renault R4 (rarely used). Renault R5, R10, Estafette, R16 (all),......
Suitable for Renault R4, R6 + Renault R16 (R1156, R1157).
Thread: M12 x 1,5. Length: 18mm. Tool: 17mm. Or. No. 7701088119 + 0608400900
1,5. Length: 18mm. Tool: 19mm. Or. No. 7700562810
R7. Outside diameter: 52mm. Inside diameter: 25mm. Wide one: 16,25mm. Made in Spain
Dimension: 30 x 62 x 16mm. Made in Spain
e, R16 all models from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: 47x25x15 mm. Bearing 2: 42x20x15 mm. Or. No. 7701460642.
from year of construction 11/1976 to 1980. R12 from year of construction 1977 to 1980. Dimension bearing 1: Outside diameter: 47,0mm. Inner diameter: 25,0mm. Overall height: 15,0mm. Bearing 2: Outside diameter: 42,0mm. Inner diameter: 20,0mm. Overall height: 15,0mm. Or. No. 7701460642
47mm, inside 20,0mm, wide one 15,25mm. Bearing 2: Outside diameter 52mm, inside 25mm, wide one 16,25mm. Dimension shaft seal: Outside diameter 58mm, inside 48mm, height of 4mm. Made in Spain
diameter: 47mm. Inside diameter: 19,80mm. Wide 12,00mm. Dimension bearing 2: Outside diameter 52mm. Inside diameter: 25mm. Wide 13,00mm.
Bearing 2: 62 x 30 x 16mm. Original equipment quality.
bearings. Dimension bearing 1: Outside diameter 62,0mm. Inside diameter 30,0mm. Wide 16,0mm. Dimension bearing 2: Outside diameter 62,0mm. Inside diameter 30,0mm. Wide 16,0mm. Note: These bearings do not have an O-ring!
bearings. Dimension bearing 1: Outside diameter 62mm. Inside diameter 30mm. Wide 16mm. Dimension bearing 2 with O-ring: Outside diameter 62mm. Inside diameter 30mm. Wide 16mm. Made in Spain
electric plug contacts.
supplied without lid. Or. No. 77.04.000.003
floor pan). Suitable for Citroen 2CV up to the year of construction 1970 (depending on country of delivery). Citroen Dyane, Acadyane. Renault R4 + R16.
Select your Citroen 
Please select your Peugeot 
Please select your Citroen Renault 
